Used Pass Boat for sale (1,156)

Condition: used, mileage: 20 km, power: 100 kW (135.96 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,225 kg, color: black, gearing type: automatic, number of seats: 3, total length: 5,050 mm, total width: 2,032 mm, total height: 1,982 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4038.NW26.TL78054 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Trailer coupling, preparation kit - Electrical preparation kit for trailer coupling - Wiring harness, 13-pin socket and trailer module for retrofitting a trailer coupling Kdodpeynqb Tofx Ah Eot * Paint: Metallic * Load compartment protection package * Heated steering wheel * SVO: Vehicle Integration System - Programmable interface for body manufacturers. Interface module for integrating conversion functions via the SYNC touch display, including: - extended electronic interface module - Logic Tool, which allows conversion manufacturers to program their own control units and functions * Seat package 16A - Driver's seat, 4-way manually adjustable, including lumbar support and adjustable inner armrest - Double passenger seat with pass-through flap, fixed - Seat heating for driver - Seat heating for passenger (outer seat) - Tray on passenger seat (foldable) - Side airbags, left and right - Head/shoulder airbags, front, left and right - Fabric upholstery Plus Style, seat center section in Black Onyx, rest in Ebony * Socket: 12-volt socket in the load/passenger compartment * Techno 5 package - Exterior mirrors with turn signals, electrically adjustable, heated and foldable * Audio system, 13-inch multifunction display, Ford SYNC 4 including navigation * Partition (metal) with window OTHER EQUIPMENT * 2-stage unlocking for passenger and load compartment. Prevents the locking of open doors * ABS electronic with EBD * Airbag passenger side * Airbag driver side * Exterior mirrors electrically adjustable and heated * Exterior mirror housings made of plastic, black-gray * Battery: H7 AGM single battery * Roof, flat * Roof console * Double-wing rear door (without window), unlockable from 90° to 168° * Rev counter * Third brake light * Electronic Stability Program (ESP) - Hill start assist - Safety brake assist (EBA - Emergency Brake Assist) - Traction control (TCS) * Vehicle floor in driver's cabin, rubberized * Vehicle modem - WLAN hotspot 5G modem - Information about the current status or location of the vehicle and control of selected vehicle functions via smartphone with the Ford App - Current traffic information in real time (i.c.w. navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Electric front window lifters * Parking brake, electric * Transmission: 8-speed automatic * Glove compartment with lid * Interior lighting, front * Automatic climate control * Headrests (3) * Fuel tank 55 l * Load compartment lighting, LED * Steering wheel made of plastic * Center console, small * Driver drowsiness warning * Emergency call assistant eCall emergency call system for sending an emergency call in the event of an accident or manual activation * Technology Package 2 (Trend) - Ford audio system with 13?? multifunction display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver drowsiness warning, camera-based - Traffic sign recognition system - Wrong-way driver warning function - Lane Keeping Assist including Lane Departure Warning - Park Pilot system front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particle filter: Diesel particulate filter * Radio accessories: 4 loudspeakers * Wheel covers, full-size * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5 J x 16 m.215/65 R16 * Tail lights, halogen * Gear shift lever on the steering column * Windshield wipers with rain senso

Condition: used, Year of construction: 2016, Overview This CEEM TSS-1845 is a fully automatic side-seal shrink-wrapping machine with an integrated shrink tunnel, built in 2016. Products are fed on the conveyor, wrapped in transparent shrink film with a continuous side seal, and passed through the heat-shrink tunnel to form a tight, retail-ready transparent pack. The machine handles single items as well as grouped products. The side-seal unit is manufactured by Alpha Pack Europe (Italy) as model APSS-5022 and supplied under the Spanish CEEM brand (Grupo CEEM Packaging S.A., Elche). A constant-temperature thermal system provides uninterrupted sealing; product changeovers are made simply by turning the hand-wheels, without changing product guides, and product-length sensors allow automatic length control via the touch-panel control. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: CEEM - Grupo CEEM Packaging S.A. (Elche, Alicante, Spain) Ksdpszk H Nkjfx Ah Esdt - Model: TSS-1845 (side-seal unit OEM: Alpha Pack Europe APSS-5022) - Year of manufacture: 2016 - Machine type: fully automatic side-seal shrink-wrapping machine with shrink tunnel - Applicable film: POF / PE / PVC, thickness 0.05 - 0.08 mm - Max. sealing width: 500 mm - Max. product height: 220 mm - Packing speed: 30 - 45 packs/min - Conveyor speed: up to 30 m/min - Film reel: outer Ø up to 400 mm, core Ø 75 mm - Power: approx. 3 kW, 380 V - Compressed air: 5 - 6 bar - Weight: approx. 850 kg (side-seal unit; shrink tunnel additional) - Side-seal unit dimensions: approx. 2,100 x 1,960 x H 1,900 mm (excl. tunnel) Equipment - Automatic side-seal sealer with motorized film unwind and continuous side sealing - Heat-shrink tunnel with adjustable temperature control - Touch-panel control, hand-wheel format changeover, product-length sensors - Infeed conveyor Condition Used - in very good, clean condition; still installed and under power at the current site and available for inspection on request. Availability Immediately. Location: Spain. Dismantling, handling and truck loading can be quoted on request (EXW). The machine can be visited on request.

Condition: excellent (used), POLYCITRUS FRATELLI INDELICATO ZX2 Industrial Extractor – Stainless Steel POLYCITRUS FRATELLI INDELICATO ZX2 industrial extractor, designed for the continuous extraction and separation of juice and pulp in the industrial processing of citrus fruits and other compatible fruits. The equipment features a large upper feed hopper and a horizontal processing chamber, where the product undergoes a mechanical action that allows for the extraction of the usable fraction and its separation from peels, seeds, fibers, and other solid residues, depending on the product and the installed configuration. Its construction, primarily in stainless steel, and its robust design allow it to be incorporated into industrial lines for the production of juices, pulps, and fruit derivatives. MAIN FEATURES -Manufacturer: FRATELLI INDELICATO -Designation: POLYCITRUS -Model: ZX2 -Type: Industrial fruit / citrus extractor -Continuous operation -Upper feed hopper -Horizontal extraction chamber -Mechanical extraction and separation system -Separation of liquid / pulpy fraction and solid residues -Differentiated discharges according to configuration -Driven by an electric motor -Construction primarily in stainless steel -Enclosure of the moving elements Ksdpjzxwyvsfx Ah Eodt -Robust industrial structure -Access to the processing chamber for cleaning and maintenance -Suitable for integration into fruit processing lines PROCESS The fruit or raw material, previously prepared, is fed through the upper hopper and passes into the extraction chamber. Inside, the mechanical system exerts the necessary action to break, press, and/or separate the product, allowing the recovery of juice, pulp, or a combination of both, depending on the product being processed and the internal elements installed. During the process, undesired fractions, such as peels, seeds, and fibrous material, are separated and evacuated independently of the usable product. The resulting product can then be sent to: Refiners / finishers Screens Buffer tanks Centrifuges Homogenizers Pasteurizers Sterilizers Evaporators / concentrators Aseptic tanks Filling lines APPLICATIONS Particularly suitable for fruit processing industries, juice, pulp, fruit base, and citrus derivative manufacturers. Depending on the installed extraction elements and the prior preparation of the raw material, it can be used in different extraction, separation, and recovery processes for the usable fraction of the fruit. The POLYCITRUS FRATELLI INDELICATO ZX2 provides a robust solution for incorporating a continuous mechanical extraction stage into industrial fruit processing lines. Machine available for inspection. Additional technical information, production capacity, internal configuration, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. Kdjdpfx Ahoq I Nxde Eet 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Kdsdpfx Ahsu I R Utj Eot Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, Very small and high sensitive Metal Detector, flexible setting of detector head, suitable for detecting small products and specials applications. - Specifications: stainless steel framework; weight of product: max. 1kg; detecting speed: 0.17-1m/sec; detecting accuracy: FE from Ø 0.6mm, SUS from Ø 1.8mm; tunnel size WxH: 150x100mm; max. passing size WxH: 110x60mm; power: 220V/0.15kW, 50Hz/60Hz; dimensions and weight: L940xW500xH1198mm, 100/200kg. Kdodsv Nm E Hspfx Ah Eet Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 148,841 km, power: 105 kW (142.76 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,200 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Equipment: * Body/Superstructure: Standard L2H1 van, * Air conditioning, Kedpfx Aey Unyuoh Esdt * Auxiliary heater, * Double passenger seat, * Wooden floor in the cargo area, * Paneling in the cargo area, * Tow hitch 2,800 kg with step, Technology: * MB Radio Audio 15, * Bluetooth, * Electrically adjustable and heated exterior mirrors, * Outside temperature display, Safety/Environment: * Airbag driver/passenger side, * Brake assist, * Braking system with ABS+ASR, * Stabilizer bar front + rear, * Low emissions according to Euro 6 emission standard, Other: * Originally delivered in Germany, * 1 previous owner, * Engine 2.1 L - 105 kW CDI CAT, * Wheelbase 3665 mm, * Permissible total weight 3.20 t, * New inspection passed, Since 1972, we have been your reliable partner for all things automotive/commercial vehicles in 28832 Achim, near the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special rates. If you are interested, we will gladly prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery as a trade-in. If a new TÜV (German technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: like new (used), functionality: fully functional, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 2,240 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, workpiece height (max.): 160 mm, table width: 1,300 mm, workpiece width (max.): 1,300 mm, VIET Challenge 211 B Wide Belt Sander – 2 Heads! LIKE NEW! Professional, Italian wide belt sander – VIET Italia Challenge 211 B calibrator. This machine is equipped with two sanding heads, enabling calibration and precise sanding in a single pass. Head configuration: - First head – calibrating roller - Second head – hard rubber roller for precise sanding - Pneumatic oscillation and belt tensioning - Air blowing and cleaning system for the belts on both heads - Pressure rollers for processing shorter workpieces The machine is suitable for processing solid wood, laminated boards, MDF, plywood, veneer, and furniture components. Its heavy-duty construction ensures stability, high calibration accuracy, and excellent surface finish. Technical data: - Manufacturer: VIET Italia - Model: Challenge 211 B - Type: Wide belt sander / calibrator - Number of sanding heads: 2 - Maximum working width: 1300 mm - Material thickness range: approximately 3–160 mm - Adjustable feed speed - Control from the operator panel - Pneumatic belt tensioning - Pneumatic belt oscillation - Air blowing of sanding belts - Pressure rollers for short workpieces - Power supply: 400 V - Compressed air requirement: approximately 6 bar - Machine weight: approximately 2240 kg The machine is available immediately. It can be started and inspected before purchase. We offer assistance with loading and can arrange transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior arrangement. You can test the machine on-site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Kdodpfx Ahezxz E Ne Ejt jbsmaszyny.pl

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Kdjdpfx Aozx Unwoh Eet Stainless-steel piping and flanges (for the thermal control station only)

Condition: excellent (used), machine/vehicle number: 8FBMT30-13779, Year of construction: 2021, operating hours: 531 h, lifting height: 5,000 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, battery voltage: 80 V, fork length: 1,200 mm, Battery: 80 V, Year of manufacture 2021 Lifting capacity: 3.000 kg Ksdpezymyuofx Ah Ejdt Maximum passing height: 240,5 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Fork carriage: Sideshifter Please contact Karl Leitner for more information = Additional options and accessories = - Free lift

Condition: excellent (used), machine/vehicle number: 8FBMT35-14695, Year of construction: 2022, operating hours: 1,257 h, lifting height: 5,000 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, battery capacity: 775 Ah, fork length: 1,200 mm, Battery: 775 Ah, Year of manufacture 2022 Lifting capacity: 3.500 kg Maximum passing height: 240,5 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Fork carriage: Sideshifter Please contact Karl Leitner for more information = Additional options and accessories = Kdsdpfezymyzjx Ah Ejt - Free lift

Condition: new, functionality: fully functional, Year of construction: 2027, load capacity: 6,000 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic handler Fork width: 100 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostatic Speedshift Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire condition: New Rear tire type: Pneumatic Ksdpjzydlzjfx Ah Eodt Rear tire condition: New Description: Machine completely workshop-tested, cleaned, and new UVV and inspection passed! Tilting fork carriage CAT 1320mm with ISO fork tines Rear work light, front work light, heater, full cab, CE certificate, interior mirror, joystick, LED, seat - Interior rearview mirror - LED work lights front and rear - High-capacity starter battery - 2x12V - 180 Ah - 1200 A - Wheel chock - Easy Link - Tires - AEOLUS - AGP23 - 445/65 R22.5 169F

Condition: used, overall weight: 18,000 kg, first registration: 09/2019, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, - Side loading, interior height 2700 mm - Pass-through system Kodpfx Ajzy Eayoh Eodt - Unladen weight 4600 kg

Condition: new, Year of construction: 2027, ELECTRICAL BOX TYPE OVEN The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. Kjdpfxsvv Edbo Ah Esdt The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can operate at 250ºC and maintenance cover. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, Year of construction: 2019, operating hours: 12,190 h, lifting height: 4,500 mm, fuel type: diesel, power: 185 kW (251.53 HP), motor manufacturer: Volvo TAD 873 VE, gearing type: hydrostat, fork length: 2,400 mm, Empty weight: 25.000 kg Lifting capacity: 18.000 kg Maximum passing height: 335 cm Dimensions of cargo space: 609 x 305 x 323 cm Tyre brand: Trelleborg Kedpsxf Eb Uefx Ah Eedt Front tyre size: 12.00 – 20 Rear tyre size: 12.00 – 20 Production country: SE Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 Kdedsuiq Dhepfx Ah Ejt We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), mileage: 261,435 km, power: 397 kW (539.77 HP), first registration: 04/2016, fuel type: diesel, fuel: diesel, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: AdBlue, crane, = Additional Options and Equipment = - PTO (Power Take-Off) = Further Information = Transmission Transmission: I-Shift, automatic Functionality Boom type: Telescopic (13 sections) Boom length: 34 m Lifting capacity: 28,800 kg Lifting height: 3,400 cm Crane: EFFER 1255/7S + JIB 6S, year of manufacture 2015, mounted behind the cab Body manufacturer: EFFER 1255/7S + JIB 6S CE marking: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FMX 540 10X4 + EFFER 1255/7S CRANE + JIB 6S EURO 6 L PACKAGE 540 DRIVE 10X4 VEB BRAKE AIR SUSPENSION WHEELBASE 460 CM FMX CAB WITH AIR CONDITIONING, PARKING HEATER, NAVIGATION, CAMERA, REFRIGERATOR AUTOMATIC TRANSMISSION TRAILER COUPLING TOOLBOXES OPEN LOAD PLATFORM WITH HYDRAULIC BOAT SUPPORTS AND REAR-EXTENDABLE LOADING PLATFORM LOADING PLATFORM LENGTH 680 CM LOADING PLATFORM WIDTH 250 LASHING EYES EFFER 1255/7S CRANE + JIB 6S 13X HYDRAULIC EXTENSIONS 2 X OIL COOLERS FOR CRANE HYDRAULICS PREPARED FOR HYDRAULIC WINCH 6 X OUTRIGGERS CRANE CAN OPERATE 100% OVER THE CAB THANKS TO 2X FRONT STABILIZERS RADIO REMOTE CONTROL Kdsdpfx Asuxrtlsh Eet MAXIMUM WORKING HEIGHT 3,400 CM MAXIMUM LIFTING CAPACITY 28,800 KG MAXIMUM LIFTING CAPACITY AT 3,043 CM: 760 KG FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, Year of construction: 2018, operating hours: 9,556 h, lifting height: 4,400 mm, fuel type: electric, mast type: triplex, power: 25 kW (33.99 HP), motor manufacturer: Linde, fork length: 2,000 mm, Empty weight: 6.555 kg Kodpfxszzl Awo Ah Eedt Battery: Year of manufacture 2020 Lifting capacity: 5.000 kg Maximum passing height: 230 cm Fork type: Vast Fork carriage: Positioner and spread Please contact Martyn Joosse for more information = Additional options and accessories = - Pneumatic shaped solids

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. Kdjdpszzlqnjfx Ah Eot The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: new, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Volkswagen Crafter 35 Panel Van "new model", medium wheelbase 3640mm, front-wheel drive, 3500kg permissible gross weight, with high roof, 130kW/177PS, 6-speed manual gearbox, in Candy White Gross list price: €70,278 including VAT. Kdodpfszp S Dkjx Ah Eot ---- * 5-year factory warranty up to 250,000 km * 3-seater * Suspension seat "ergoComfort" on the left with weight adjustment, seat cushion tilt adjustment, backrest adjustment, adjustable headrests, 4-way lumbar support electrically adjustable, armrest on the left in the left door panel and adjustable armrest on the right * Double passenger seat with storage compartment and foldable backrest with storage table * Fixed trailer coupling (trailer load 3,000kg) * Air conditioning with manual control in the driver's cab * Heated windshield * LED headlights with LED daytime running lights * Parking assistance system in the front and rear area * Rear view camera with warning indicator (acoustic) when reversing for passing vehicles and pedestrians with emergency braking system * Floor covering in the cargo area: wood with wheel arch trim * Paneling in the cargo area: plastic up to the top * Lashing rails in the cargo area - on the side wall and partition wall * Cargo area partition with paneling * Basic assistance package including "Intelligent Speed Assist" and cruise control system * Infotainment system with 26 cm (10.4") touch-color display, 2 USB-C data/charging ports (center console) with increased charging power and 2 USB-C charging ports (center, windshield), traffic sign recognition, Wired & Wireless App-Connect Car Net for Apple CarPlay and Google/Samsung Android Auto, transfer your apps to the display in the vehicle, for example Google Maps * Digital Cockpit Pro * Exterior mirrors electrically adjustable, separately heated * Spare wheel in driving condition including onboard tools and jack * Rear double doors without window cutouts * Fuel tank with 75 liters capacity * Airbag for driver and passenger with passenger airbag deactivation * Hill start assist * Front Assist with warning and braking on vehicles, pedestrians and cyclists * Multifunction steering wheel * Tire pressure monitoring system (direct measuring) * Lane keeping assistant "Lane Assist" * Stowage package 2: roof console with two 1 DIN compartments and reading light * Central locking "Keyless-Go" without safe lock * Windshield wiper intermittent function with light and rain sensor * Front bumpers with painted trim in vehicle color * Grab handles at the rear, left and right * LED interior lighting concept in the cargo area * Mud flaps at the rear Further equipment: Airbag driver/passenger side, passenger airbag switchable, exterior mirror convex, left, exterior mirror convex, right, turn signal LED integrated into exterior mirror, floor covering in driver's cab: rubber, underbody paneling for Cd value, dual-tone - fanfare, entry handle on rear pillar, left, entry handle on rear pillar, right, driving assistance system: hill start assist, driving assistance system: brake assist (HBA), fatigue detection sensor, driving assistance system: crosswind assist, electric window lift front, windshield laminated glass, remote control (2) foldable, grab handles A-pillars, glove compartment lockable, interior lights in driver's cab: LED, interior lights in cargo/passenger compartment: LED, body/superstructure: panel van high roof, body variant: high roof in vehicle color, fuel tank: 75 liters, radiator grille with chrome strip at the top, steering colum

Year of construction: 2026, condition: new, functionality: fully functional, Vibrating screens are used in crushing and screening plant to separate end products of various sizes. When the material is poured into the screen, the smaller ones pass through the screen surface. Vibrating screens are produced in two, three and four decks and in various sizes. The vibration system can be in the middle or above the screen body. It is obtained by rotating the eccentric weights connected to the shaft, which are mounted on the screen body. Screen body sits on fixed or mobile chassis with heavy type helical springs that absorb vibration. The vibration systems of these vibrating screens are operated by belt-pulley transmission with an electric motor. Horizontal screens, which are capable of better-quality screening, are driven by a double drive center. • Model: FABO HTE-2260 • Type: Horizontal Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 • Motor: 2 x 30 kW • Bearings: Heavy duty SKF-FAG • Capacity: 250-370 TPH • Including chassis, motor and safety guards. Ksdpfezz R D Tsx Ah Ejdt Depending on its size, it has a screening capacity in the range of 250-370 tons per hour.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Kdedpfx Ahst Tfbqe Eet Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,600 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller year of construction:2008 Kdjdpeula Trefx Ah Eot Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Kdsdpfx Asxy Tmuoh Eet

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Kdedpfx Aheyy St Ae Eot Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -