Used Pallet for sale (6,472)

Condition: repair required (used), JUNGHEINRICH EJC 150 – PALLET TRUCK / REACH TRUCK For sale: an electric Jungheinrich reach truck. The truck is sold FOR PARTS, INCOMPLETE – in the exact condition as shown in the photos. It has not been prepared or made complete for sale. Dedpfx Asz Hrftjilocn The price applies to the entire truck as it stands. DATA FROM THE NAMEPLATES: • Manufacturer: Jungheinrich • Type: EJC 150 • Nominal load capacity: 1500 kg • Lifting height: 3500 mm • Load center of gravity: 600 mm • Power supply: 24 V • Unladen weight (without battery): approx. 870 kg • Minimum battery weight: 200 kg • Maximum battery weight: 305 kg The truck also has a Tudor / CEAC traction battery: • Voltage: 24 V • Battery weight (from the nameplate): 203 kg CONDITION: • Used truck • Incomplete • Intended for parts / for repair • The technical condition of individual components is not verified • Sold without any guarantee of operation • Sold as a whole, in the condition shown in the photos Due to the condition of the truck, this offer is primarily intended for those looking for parts, components, or a base for repair.

Condition: good (used), Year of construction: 2010, operating hours: 3,552 h, load capacity: 1,800 kg, fuel type: electric, empty load weight: 500 kg, mileage: 3,552 km, Well-functioning electric pallet truck Linde T18 from 2010; Capacity of 1,800 kg; 3,552 operating hours; Equipped with battery, external charger, and automatic filling system; Fitted with a fruit rack; Dealer maintained by Linde. Dodew Ufakjpfx Ailecn

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact, high-capacity heavy-duty rack designed for industrial warehouse requirements. The modular high-bay racking is ideally suited for logistics, industrial operations, large warehouses, and freight forwarding companies. With a shelf load of up to 2,250 kg per level and a bay load up to 9,000 kg, this immediately available pallet rack system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 1,400 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm PNB0472 - Beam colour: powder-coated yellow - Frames: approx. 520 x 110 cm, pre-assembled - Frame colour: powder-coated blue - Levels: floor + 2 - Pallet locations: 45 incl. floor spaces Dodpfx Ajz Iz Nwjilscn - Version: Used STOW system SCOPE OF DELIVERY: - 06 x frames (approx. 520 x 110 cm), pre-assembled - 20 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 40 x locking pins Price: €1,340.00 net €1,594.60 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner freight service – shipping costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to prepare a non-binding offer tailored to your requirements. Whether new construction, conversion or extension – we competently advise you on your racking configuration. SHOWROOM: You are welcome to visit our showroom! On-site, you can get a comprehensive impression of our pallet racks, shelving systems, and additional solutions. Many systems are assembled and ready for you to experience directly. Our experts are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Just contact us via message or phone call. You can find our phone number on our company page. ☎️ We can be reached by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we’ll get back to you as soon as possible.

Condition: good (used), 4 Kornit Digital pallets for Kornit Storm HD, Avalanche HD and Atlas DTG printers. Kornit accessories available now, individually or as a full bundle. Firts Set : 2 Kornit Neck Tag pallets, P/N 33-PALT-0027-S (item code 26820), new in box Genuine Kornit Neck Tag standard QR pallet. It prints the main design and the neck tag in a single pass, with no separate labelling step. Dodpfoz H Ulpex Ailocn - Main print area: 40 × 50 cm - Neck tag print area: 6.5 × 7 cm - Compatibility: Kornit Storm HD, Avalanche HD, Atlas (QR mount) - Condition: new, never mounted, in original Kornit packaging and foam - Kornit list price (official store): €3,400 excl. VAT, currently out of stock - Price: €2,400 excl. VAT each, 29% below the Kornit list price Second Set : 2 Kornit Children pallets, 26.5 × 32.5 cm platen (type 33-PALT-0035-S), used Genuine Kornit children-size pallets. - Mechanically sound: hinged frame, locking, screwed platen - Adhesive and ink residue on the surface, cleaning required - Kornit new price: €2,400 excl. VAT - Price: €1,000 excl. VAT each Full bundle of 4 Kornit pallets: €6,120 excl. VAT instead of €6,800 excl. VAT (10% off). Limited stock: only 4 pallets. Genuine spare parts and accessories for Kornit Digital DTG textile printers.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Dcodsz Iq I Aspfx Ailon Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) Dcsdpfxsz Irx No Ailon - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, functionality: fully functional, This pre-owned STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. Its modular high-bay design is ideal for logistics centers, industrial settings, large-scale warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet racking solution offers efficient storage for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 5,040 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm, model PNB0472 - Beam color: yellow, painted - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue, painted - Levels: floor + 4 - Pallet spaces: 270 including floor positions - Model: STOW, pre-owned SCOPE OF DELIVERY: - 19 x Frames (approx. 1,050 x 110 cm), pre-assembled - 144 x Beams (approx. 270 x 12 x 5 cm) PNB0472 - 288 x Safety pins Price: €6,960.00 net Dodpfxsz Iw Sbe Ailecn €8,282.40 gross An invoice with VAT shown separately will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our logistics partners – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer individually tailored to your requirements. Whether for new builds, modifications, or expansions – we offer expert advice on your racking configuration. SHOWROOM: You are welcome to visit our showroom! On site, you can get a comprehensive impression of our pallet racking, storage shelves, and other solutions. Many systems are set up and ready for you to experience directly. Our expert consultants are available to answer your questions and provide personalized advice – we look forward to your visit! Haven't found what you're looking for? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us via message or phone call. You will find our phone number on our company page ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale is a high-quality, customer-specific robotic handling system from Wehling Anlagen- und Maschinenbau GmbH, manufactured in 2018. The system was originally developed for the automated processing of wooden pallets and large-format sheet materials and combines two work processes in one system: * automatic destacking of nested wooden pallets * automatic sorting and restacking of large-format sheets according to quality classes The core of the system is a powerful 6-axis Kawasaki BT200L industrial robot with an automatic tool changer. The system is ideally suited for applications in the wood, construction materials, sheet materials, and logistics industries, or as a basis for individual automation projects. Technical equipment: Manufacturer: Wehling Anlagen- und Maschinenbau GmbH Year of manufacture: 2018 Project No.: P113104 Kawasaki 6-axis industrial robot BT200L Robot payload: 200 kg Large working radius Siemens TP700 Comfort touch panel PLC control Main switch cabinet Automatic tool changer Dcsdpfx Aeziwprsilsn Pallet gripper Sheet suction gripper 4 pallet stations Automatic pallet recognition Paper dispenser for interleaving sheets Safety fence Safety light curtains Pneumatic system Possible applications: Pallet handling Pallet destacking Pallet turning Sheet sorting Order picking Material handling Automation of manufacturing processes Robotics projects Retrofitting of existing production systems Scope of delivery: Complete robotic system Kawasaki BT200L Robot controller Switch cabinet Siemens HMI Pallet gripper Sheet gripper Tool changer station Pallet stations Paper dispenser Safety fence Safety light curtains Documentation Operating manual Condition The system is in operation. The scope of delivery corresponds to the existing components. An inspection is possible by appointment. Special features: Special machine construction "Made in Germany" High-quality Kawasaki industrial robot Extensive documentation available Ideal basis for retrofit or automation projects Technical data: Feature Value Manufacturer Wehling Anlagen- und Maschinenbau GmbH Type Combined system pallet destacker / sheet sorting Year of manufacture 2018 Project P113104 Robot Kawasaki BT200L Payload 200 kg Control Siemens TP700 HMI / PLC Gripper Pallet gripper + sheet suction gripper Safety equipment Light curtains, protective fence

Condition: used, Year of construction: 2017, operating hours: 1,016 h, lifting height: 4,500 mm, free lift: 1,680 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 2,190 mm, color: other, GVW: 1.820 kg Lifting capacity: 1.200 kg Dodsz Nh Nnepfx Ailocn NEW BATTERY CELLS 24V 3PzB 300Ah, FUNCTIONS LIKE NEW! 220V high-frequency charger, SIDESHIFT, Fork size 1150 mm, Power steering, Forks spacing 670 mm, In the Netherlands 3 months machine warranty, In the Netherlands 1 year battery warranty.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display Dodpfxsz Ir Hao Ailecn - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 34/1998, type of input current: three-phase, input voltage: 380 V, total length: 21,300 mm, air demand: 34 m³/h, Complete used packaging and palletizing line, perfectly integrated and operational, ideal for granular, powdery, and similar products (soil, fertilizers, peat, nutshells, and bulk materials for agricultural and industrial use). The system includes all process stages: 16 m³ peat hopper with clod-breaking devices, 0.8 x 13 m conveyor belt, Loro & Parisini hammer mill model M66 (30 kW), 10 m³ feed hopper, 0.8 x 14 m feed belt for the bagging machine, ESSEGI bagging machine model CTS 80 (serial no. CTS 80 34/98, year 1998, 11 kVA) with forming tubes for 10-20-45-70 liter bags, ESSEGI bag compactor, TMG palletizer model SIRIO 1S80 (serial no. 2.500.12.98, year 1999, 14 kVA), ROBOPAC wrapping machine model AVR 201/ATS with rotating arm, pre-stretch, and top anti-drip function, rotating pallet discharge platform with roller conveyor, dust extraction system, electrical systems, and compressed air system (compressor excluded). The system is already operational, previously purchased and used by the company for producing bags ranging from 10 to 70 liters, and is in good overall condition. Estimated capacity is 350–500 bags/hour, depending on the product and format. Photos, layout drawing, and further technical documentation are available upon request. Dsdpfx Aiez E Dagelecn Price negotiable. The entire system is being sold as a complete unit.

Condition: good (used), Year of construction: 2008, operating hours: 2,059 h, load capacity: 1,800 kg, fuel type: electric, empty load weight: 485 kg, mileage: 2,059 km, Well-functioning Linde T18 electric pallet truck from 2008; Capacity of 1,800 kg; 2,059 hours on the meter; Equipped with battery, external charger, and automatic filling system; Dealer maintained at Linde. Dodpfx Aew Suz Ejilocn

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm Dsdoz Iqnvspfx Ailocn ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long Dcjdpfez Ipwcjx Ailsn TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges Dcjdpfjz Ip S Hjx Ailsn FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Dcsdpfx Aisz Ipr Helen via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Djdpfx Aijz Iprtslocn Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2000, condition: good (used), Semi-automatic pallet wrapping machine, stretch wrapping machine Design with horseshoe-shaped turntable for easy loading with a pallet truck Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volts / 50 Hz Year of manufacture: 2000 Pallet wrapping machine Capacity: 1200 kg Turntable: with fork opening Turntable diameter: 1500 mm Adjustable turntable rotation speed Motorized film pre-stretch adjustable to 100% or 200% Turntable height: 75 mm Wrapping programs Program 1: Double wrapping with lifting and lowering of the film carriage Program 2: Double wrapping with lifting – pause for attaching the top cover of the pallet – and lowering of the film carriage Program 3: Simple wrapping with only lifting of the film carriage Program 4: Simple wrapping with lifting of the film carriage and pause for attaching the top cover Intended use Re-wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm Dcsdpfx Aepygwqeilen kg = 1200 pallet wrapping machine, stretch wrapping machine More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs Dcsdpfxez Irr Aj Ailsn The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact and high-performance heavy-duty shelving solution for industrial storage needs. The modular high-bay rack is ideally suited for logistics, industrial facilities, large-scale warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 3,080 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm (PNB0472) - Beam color: yellow powder-coated - Uprights: approx. 520 x 110 cm, pre-assembled - Upright color: blue powder-coated - Levels: floor + 2 - Pallet spaces: 99 including floor spaces - Design: Used STOW model SCOPE OF DELIVERY: - 12 x upright frames (approx. 520 x 110 cm), pre-assembled - 44 x beams (approx. 270 x 12 x 5 cm), PNB0472 - 88 x locking pins Price : €2,768.00 net Djdjz Ip D Njpfx Ailscn €3,293.92 gross You will receive an invoice with VAT stated separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany through our partner freight forwarders – shipping costs depend on your postcode - Professional assembly and disassembly by our trained teams available on request - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your requirements. Whether for new installations, modifications or extensions – we offer expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get a comprehensive overview of our pallet racking, storage racking, and other solutions. Many systems are assembled and can be experienced directly. Our specialists are at your service for questions and individual consultations – we look forward to seeing you! Still haven't found the right solution? Visit our website for a quick overview of many product offers and variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents. Dcjdpfxezvn Thj Ailjn

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film Dcsdpfez Iqp Tjx Ailen F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete wood debarking line for pallet production, including a stacking machine, crosscut saw, chipper, edger, and dust extraction system. Year of manufacture: 2021 Technical data: - Max wood diameter: 480 mm - Minimum wood diameter: 120 mm - Minimum wood length: 1500 mm - Max log length: 3000 mm CAPACITY: UP TO 200 m3 PER SHIFT THE DEBARKING LINE CONSISTS OF THE FOLLOWING MACHINES: 1. BRODPOL DEBARKING LINE, which includes: - Log infeed conveyor - Longitudinal conveyor for the saw - Circular saw – 110 and 90 kW motors - Receiving roller table with a mechanism for removing edgings and side boards - Powered roller table - Base table SB 4000 - Multi-blade two-shaft saw WP 210 – 110 and 75 kW motors - Receiving table with board discharge and conveyor to the stacking machine - Lower return conveyor for edgings, side conveyor to the edger, and conveyor belt to the chipper - Sawdust screen 2. LIGNUMA OFZ 300 EDGER AND TRIMMER Year of manufacture: 2023 The machine consists of the following components: - Centering table - Trimmer MN 315 - Separating table SC-2 - Edger OFD 500/K 3. TEKNAMOTOR SKORPION 650 EB/2 CHIPPER with infeed and discharge systems. Dodpfx Ajv Dm T Tsilscn 4. COMPLETE DUST EXTRACTION SYSTEM FOR ALL MACHINES.

Condition: used, functionality: fully functional, This used STOW pallet rack is a compact, high-performance heavy-duty racking system designed to meet industrial warehousing demands. The modular high bay racking is ideally suited for logistics centers, industrial applications, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load of up to 9,000 kg, this immediately available pallet racking system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 1,400 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm PNB0472 - Beam color: yellow powder-coated - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue powder-coated - Levels: Floor + 4 - Pallet positions: 75 including positions at floor level - Version: Used STOW system Dsdjz I Nhuopfx Ailscn SCOPE OF DELIVERY: - 06 x frames (approx. 1,050 x 110 cm), pre-assembled - 40 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 80 x safety clips Price: €2,080.00 net €2,475.20 gross An invoice with VAT shown will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carriers – freight costs depend on your postal code - Professional assembly and dismantling by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers possible PLANNING & CONSULTING: Our planning department will be happy to prepare a tailored, no-obligation offer according to your requirements. Whether for new builds, conversions, or expansions – we provide expert advice on your racking configuration. SHOWROOM: We invite you to visit our showroom! Here you can get a comprehensive impression of our pallet racks, storage racks, and additional solutions. Many systems are on display and ready for hands-on inspection. Our expert advisors are available for your questions and personal consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Please contact us via message or phone call. You’ll find our phone number on our company profile. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will call you back as soon as possible.

Condition: used, machine/vehicle number: W41153L00104, Year of construction: 2022, operating hours: 3,050 h, load capacity: 2,000 kg, lifting height: 150 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! Dedpfoz Iwwdox Ailjcn TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 150 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 166 Ah Battery voltage in idle state: 25.3 V Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,300 mm Own weight: 900 kg Operating hours: 3,050 h EQUIPMENT Folding platform Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 397