Used Oximat for sale (1,232)

Condition: used, mileage: 382,000 km, power: 102.97 kW (140.00 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 1,300 kg, first registration: 03/2016, next inspection (TÜV): 11/2025, loading space length: 3,700 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, emission class: euro5, energy efficiency: B, color: red, tire size: 235/65R16C, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, airbag, central locking, sliding door, Internal code: RE-MA-16-F09 YEAR: 03/2016 Hjdpfew Dpy Iox Afienu 140 HP KM: approximately 382,000 EURO 5B WITH PARTICULATE FILTER FUEL: DIESEL GVW: 3,500 kg PAYLOAD: 1,300 kg INTERNAL LENGTH: approx. 3.70 m INTERNAL WIDTH: approx. 1.80 m INTERNAL HEIGHT: approx. 1.90 m TYRES: 235/65R16C ROADWORTHINESS INSPECTION: valid until 11/25 TEST DRIVE and VEHICLE VIEWING by appointment at our location in Cornate d’Adda (MB). Prices shown are net of VAT [22%] and registration/transfer fees. "SCAM" accepts no liability for any discrepancies in this advert, which does not constitute a contractual obligation.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 12,638 h, load capacity: 5,000 kg, lifting height: 4,045 mm, free lift: 1,310 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,350 mm, fork length: 2,350 mm, empty load weight: 6,585 kg, total length: 3,150 mm, drive type: Diesel, construction width: 1,480 mm, Diesel Forklift Load center of gravity: 500 Fork width: 150 mm Hodpfewiz I Ujx Afisnu Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 355/45-15 Rear tires type: Superelastic Rear tires size: 2.50-15 Description: In addition to this Linde model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle over the counter, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this H50D-02. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts weighing 8 tons and over. We're happy to display your vehicle for consignment sale. Sideshift, Full free lift,

Condition: new, Year of construction: 2025, table height: 850 mm, pressing force: 80 t, table width: 600 mm, table length: 800 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, Hnedpevxhb Uofx Afisu o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: ready for operation (used), Year of construction: 1999, operating hours: 45 h, Man-Roland 204 E OB age 1999 Only 45 Mio RCI 2 - remote controlled inking Rolandmatic continuous dampening Easy plate Hnjdpfx Aswarb Hjfisu Blanket washing device - automatic Stream feeder, Powder sprayer Antistatic feeder Technical Data: Maximum sheet size: 52 x 74 cm (20.5 x 29.1 inches) Minimum sheet size: 26 x 40 cm (10.2 x 15.7 inches) Maximum printing area: 51 x 72 cm (20.1 x 28.3 inches) Maximum printing speed: Up to 13,000 sheets per hour Plate size: 605 x 745 mm (23.8 x 29.3 inches) Substrate compatibility: Paper, cardboard, light packaging materials Number of colors: Available in two-color configuration Power requirements: 400V, 50Hz, 42 kW Machine weight: Approximately 13,000 kg (28,660 lbs)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Hjdpsxhfbtjfx Afionu Semi-automatic unloading of finished parts via SAP

Condition: used, Year of construction: 2012, operating hours: 2,550 h, Serial number: CLG00835JCL29xxxx Please contact ATS Norway for more information Hnjdpfx Aexhcd Ejfisu Please provide reference number upon request: 21386 Certified until: 10.2025 Hours: Approximately 2,550 Engine: 119kw Weight: Approximately 13,500 Tires: Double Coin REM2, 20.5R25 Disappoint 3-function (not function tested) Central lubrication Camera LED Work Light Quick release Description: Wheel loader with central lubrication and bucket. Fault in the electrical system of the gearbox, gears 1 and 2 do not work. Repair must be calculated. Central locking, camera and 3 functions. Brake cylinder for parking brake defective. Repair must be calculated. Is in regular use internally at the facility. Been with the same owner since 2015. Hours: 2550 Own weight: 13500 Kw: 119 Model: CLG 835 III

Condition: excellent (used), functionality: fully functional, Safe Waste Compactor Hnodpfx Aoxmbg Nofisu Hydraulic waste compactor that compresses directly into the waste storage container, easily adaptable for standard 1100, 660 (or 770*) litre, 4-wheeled, lidded – most often green – bins (Sulo, Otto, Schäfer, etc.). For bagged and bulk waste Compression ratio is between 1:4 and 1:8 depending on the waste composition, saving approximately 75% in waste transportation costs. Safe design ORWAK bin compactors are robust and can be operated safely. During compaction, it is not possible to reach inside the machine, ensuring operator safety. Both external and internal surfaces are easily accessible for quick and simple cleaning. The waste compactor can be used with all types of standard 1100, 660 (or 770*) litre plastic waste bins, whether with flat or semicircular lids! We can assist with transportation.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 8,002 h, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,670 kg, total length: 3,450 mm, drive type: Diesel, construction width: 1,850 mm, Rough Terrain Forklift Fork width: 100 mm Fork thickness: 50 mm Mast type: Triplex Hjdpju Dzr Uofx Afisnu Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 14 5R20 Rear tires type: Pneumatic Rear tires size: 10R17 5 Description: In addition to this Manitou model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an open-end basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this M30-2. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We'd be happy to display your vehicle for consignment sale. Sideshift, Heating, full cab,

Condition: used, functionality: fully functional, mileage: 60,000 km, power: 139.74 kW (189.99 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,815 mm, overall weight: 7,490 kg, maximum load weight: 2,400 kg, first registration: 08/2020, loading space length: 6,050 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, emission class: euro6, energy efficiency: D, color: white, driver cabin: sleeper cab, suspension: steel-air, brakes: engine braking, number of seats: 3, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), onboard computer, power assisted steering, soot filter, spoiler, tail-lift, truck registration, IVECO EUROCARGO 75-190P Year 08/2020, approximately 60,800 km EURO 6D, automatic transmission, rear air suspension, LDWS (Lane Departure Warning System), collision avoidance radar, engine brake, manual air conditioning, air-suspended driver's seat, electric windows, electric and heated mirrors, central locking, Bluetooth radio, digital tachograph, plus other standard accessories. Box body with internal dimensions approx. 6.05 m x 2.48 m x 2.38 m, plywood floor, retractable lashing rings, equipped with folding hydraulic tail lift, 1,000 kg capacity. Gross vehicle weight 7,490 kg; payload approx. 2,400 kg. Hnedpjxmakmefx Afieu MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso)

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features Hnjdpfsugbn Ejx Afieu

Condition: new, Year of construction: 2025, throat depth: 175 mm, table width: 375 mm, table length: 570 mm, stroke adjustment: 60 mm, pressing force: 25 t, STANDARD FEATURES • Steel construction frame • Stress relieving of the frame and welded parts by vibration • Parallelism and squareness tolerance between tables in accordance with ISO and DIN standards • Pneumatic clutch and brake combination • Slide block guided by 4 rails • Slide, connecting rod, ram, and similar parts made of cast steel • High-strength, monobloc crankshaft • Bronze bushings in connecting rod • Equipped with a spare table • Ratchet device table-to-ram adjustment (motorized for 150 ton and above) • Manual centralized lubrication system • Pneumatic pedal with latching mechanism and dual-hand control with timer • Electric counter • PLC integration • CE compliance Hodexg R Ucjpfx Afionu • Finger protection with light barriers • Safety PLC (controls all electrical systems, valves, double solenoids, and pedal) • Dual-coil safety valve • Panel with position lock switch • Safety block • Made in Türkiye TECHNICAL SPECIFICATIONS Capacity: 25 Tons Distance Between Table and Ram: 300 mm Ram Adjustment: 50 mm Approximate Press Width: 870 mm Approximate Press Depth: 1380 mm Approximate Press Height: 1870 mm Table Hole Diameter: 145 mm Table Size: 375 / 570 mm Die Clamping Slot Diameter: 35 mm Ram Size: 260 / 170 mm Table Height from Floor: 710 mm Stroke Adjustment: 10 / 60 mm Strokes per Minute: 120 spm Motor Power: 3 kW Motor Speed: 1000 RPM Approximate Weight: 1300 kg

Condition: excellent (used), 167 USED stainless steel internal flour silos: 2 silos of 6 tons each, 1 silo of 8 tons (can increase silo capacity by approximately 50%). EXTERNAL DIMENSIONS (in cm): - width: 320, - length: 550, - height: 400. EQUIPMENT: - Flour unloading station for bowl no. 1 with flour/dust collector, - Flour unloading station for bowl no. 2, - Water mixer, Hedpfxoxl Taxs Afionu - Overhead scale for weighing the dough bowl + computer, - IMPORTANT: Automatic water and flour dosing to the leaven generator, - Leaven generator with constant leaven temperature (heating, cooling), - Dosing of leaven to the bowl from the leaven generator, - 2 control panels. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Hedpfowym Nfsx Afienu Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 6,073 h, load capacity: 5,000 kg, lifting height: 7,550 mm, free lift: 2,660 mm, fuel type: electric, mast type: triplex, construction height: 3,720 mm, fork carriage width: 4,150 mm, fork length: 1,390 mm, empty load weight: 10,510 kg, total length: 3,680 mm, drive type: Elektro, construction width: 2,380 mm, Four-way Side Loader Load Centre: 700 Fork Width: 250 mm Fork Thickness: 50 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Solid tyres Front Tyre Size: 413/178-285.8 Rear Tyre Type: Solid tyres Rear Tyre Size: 457x229 Hnodpfx Afoxg Uqhsiju Battery Voltage: 80V Battery Capacity: 774Ah Battery Year: 2012 Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing & financing at favourable conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail on this MD50. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment and custom solutions for forklifts from 8 tons upwards. We are also happy to offer your vehicle on consignment sale in our facility. Fork Positioner, Fork Positioner Opening Range: 590 / 4,100 mm Full free lift, Platform height: 510 mm

Condition: excellent (used), functionality: fully functional, mileage: 153,000 km, power: 161.81 kW (220.00 HP), first registration: 01/2020, overall weight: 12,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 12,000 kg, maximum load weight: 5,000 kg, tire size: 245/70R19.5, fuel: diesel, wheelbase: 5,175 mm, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, loading space width: 2,480 mm, loading space length: 8,300 mm, loading space height: 2,500 mm, Year of construction: 2020, Equipment: ABS, air conditioning, compressor, onboard computer, spoiler, tail-lift, IVECO NEW EUROCARGO ML120E22P EVI_D E6 MY 2015 – Chassis ZCFAH1EG002700297 Hnjdswbczajpfx Afiou Year 01.2020 - EURO 6 6-cylinder engine - Tector 7 (800Nm) - 6728 cc - 220 HP - Approximately 153,000 km Automatic \ sequential ZF 6-speed gearbox Bodywork: white color IC 194. STRUCTURE: Wheelbase 5670 mm - Short cab - low roof - Pneumatic rear suspension G.P.T. 119.90 Q.li – possible approval 115 Q.li TRUCK EQUIPMENT: 6 Cylinder Engine - Tector 7 (800 Nm) - 6728 Cc - 220 HP, Air Conditioning Pneumatic Rear Suspension, Zf Astronic 6as 800 To Gearbox – 6 Speed Automatic \ Sequential, Hill Holder, Cruise Control, Abs (Anti-lock Braking System + Electronic Stability Control), Aebs, Ldws Lane Detection System, Engine Brake With Retarder Function, Power Steering, Short Cab \ Ml Eurocargo Euro Vi My2015, Electric Windows, Central Locking, Fog Lights, Led Drl Daytime Running Lights, Pneumatic and Heated Driver Seat, Electric and Heated Rear View Mirrors, Front Bumper In Steel, Spoiler EQUIPMENT: PLYWOOD VAN - Internal useful dimensions approx. 8.00 \ 8.30 * 2.48 H 2.40 RETRACTABLE TAIL LIFT - Useful lifting capacity 15 Q.li Documents: Nationalized - Certificate of approval For viewing and road test contact Valerio Roscini at 339/3170008

Condition: used, functionality: fully functional, Year of construction: 2023, overall weight: 2,000 kg, load capacity: 8,000 kg, Offered for sale: MAST for FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT (Item No. ERS05) Cleanly and professionally dismantled, EXCELLENT CONDITION / see photos Offered as pictured! Suitable for all forklifts with the appropriate specifications Used / only installed for testing purposes Year of manufacture: 08 / 2023 FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT Manufacturer: Linde Mast: Triplex Load capacity: 8,000 kg Lift height: 770 cm Weight: approx. 2,000 kg Read-off data: See photos New price: approx. €25,000 Hsdpfx Ajxl R S Sefionu Additional industrial trucks in stock! Inspection is possible by prior telephone arrangement on Tuesdays and Thursdays between 9 a.m. and 4 p.m. If required, the item can be collected immediately. All dimensions are approximate values. Please note for all offers: All information provided without guarantee This item is only offered for collection. If you require shipping, please contact us by phone.

Condition: used, The Heidelberg GTP is a high-performance hot foil stamping press, currently operational in a printshop in Germany. Designed for precision and versatility, this machine handles a wide range of applications, from luxury packaging to security printing. With a maximum sheet size of 340 x 460 mm and a minimum of 85 x 102 mm, the GTP accommodates diverse project requirements. It operates at speeds between 1,500 and 4,000 sheets per hour, delivering both efficiency and flexibility. The press features a punching pressure of 60 tons, ensuring crisp, high-quality foil application on various substrates. Weighing approximately 2,250 kg and with compact dimensions of 2.08 x 1.48 x 2.10 meters, the GTP is built for stability and ease of integration into existing workflows. The machine comes complete with all necessary tools, accessories, and a sturdy frame, making it a turnkey solution for any finishing department. Format: 340 x 460 mm Hodpfxjxl Rg Ns Afionu Equipment: Hot Foil Stamping Tiegel Heidelberg GTP Size min. 85 x 102mm Size max. 340 x 460mm Speed min. min. 1.500sph - max. 4.000sph Punching pressure 60T Weight approx. 2250kg Dimensions 2,08 x 1,48 x 2,10m Complete with tools and accessories include frame

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New 12 kW Fiber Laser Cutting Machine Hnjdpfxexg Dn As Afieu Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as first-class service. - Includes on-site commissioning and training at your facility (approx. 1 week) - Price includes freight to your facility - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and calibrated with Renishaw system (including measurement protocol) - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 8.5 x 3.5 meters required installation footprint - 12 kW laser source from MaxPhotonics (G5/German specification) - Top quality – schedule a viewing now! Cutting capabilities: - Steel sheets up to 35 mm - Stainless steel sheets up to 20 mm - Aluminum sheets up to 20 mm - Travel range: 1500 x 3000 mm - Machine controller in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows on three sides for monitoring the cutting process - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter library - Includes nesting module - Very easy to operate - Powerful laser chiller - Machine controller in German - Extensive service and warranty - Powerful laser chiller - Optional filter extraction system Sale exclusively to commercial customers. Delivery, consultation, and sales only within Germany / Austria / Switzerland. Approximate machine dimensions: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 5500 kg Need a different laser power, table style, or table size? No problem. I will gladly provide a suitable quotation. For example: 2 kW machine from €29,990 6 kW machine from €79,900 Not sure which laser power is suitable for your application? Just call! Of course, I can perform cutting tests according to your requirements. There is a wide range of possibilities.

Condition: used, Year of construction: 2000, operating hours: 10,889 h, Equipment: - Year of manufacture: 2000 - 9,000 kg weight - 63 kW - Cabin - Driver’s air suspension seat Hnodpfsuqgwusx Afiju - Rehnen pallet fork FEM 38, year 2018, with 4,100 kg lifting capacity - German machine - Immediately operational Since 1972, your reliable partner for all things automotive/commercial vehicles, located in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock – including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special favorable rates. If interested, we are pleased to prepare a customized offer! Trade-ins of your commercial vehicle/construction equipment are welcome. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note, our offer generally does NOT include a new TÜV certificate. Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. The details provided in advertisements, online listings, price tags, and photos are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed features may need to be verified separately. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426m Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Additional Equipment Vise Angle table Various mounts Royal presetting device Hnsdjxgwb Nspfx Afieu This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, travel distances of X 800mm, Y 650mm, and Z 550mm. It includes a 24-fold changer and an internal hard drive. Installation dimensions are approximately 2x3m. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 80E machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Brewing system with a wort output of 20hl - 25hl. The system was installed in 2019. Approximately 330 brews have been produced on it. The system is currently in operation and functions perfectly. Brewhouse from China 2019 • 3-vessel brewhouse 20hl – mash tun, lauter tun, and wort kettle • 2 hot water tanks, each 20hl Fermentation and storage technology from China 2019 – All tanks with jacket cooling • 2 fermentation vessels, 25hl – all tanks with jacket cooling, 3.0 bar pressure • 10 storage tanks – cylindroconical, 22.5hl, 3.0 bar pressure • 2 pressure tanks, 22hl, 2.0 bar pressure – all tanks with jacket cooling • Refrigeration unit – glycol with 20hl tank and pump – digital control Hjdpfow Rph Rox Afionu • CIP (Cleaning-in-Place) system with pump • Grist mill 500kg/h – mill, malt hopper, floor scale • Steam generator from Loos – with softened water tank, LPG-fired • Water softening system

Condition: used, functionality: fully functional, Year of construction: 2023, overall weight: 1,200 kg, load capacity: 4,600 kg, FORK POSITIONER incl. 4 forks (length 240 cm) for FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, professionally disassembled, EXCELLENT CONDITION / see photos Item no. ERS06 For all forklifts that meet the necessary requirements used Year of manufacture: 2023 Offer is addressed to commercial customers, dealers, public and church institutions! We offer items from various acquisitions, described as accurately as possible with informative photos. No further information about the item can be provided. Unless expressly stated otherwise, this offer refers to used goods. Item is operational with signs of previous use. Existing faults can be discussed by phone. FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT Manufacturer: Linde or STILL and others Mast: suitable for all mast types Rated capacity: 4,600 kg Lifting height Weight approx. 1,200 kg Type: DKP 80 P Read data: see photos New price: approx. €15,000 Technical data see photos. Other industrial trucks in stock! Viewing possible Tuesdays and Thursdays between 9 am and 4 pm by prior appointment by phone. Hnsdpfx Afexl R E Eeisu If required, the item can be taken immediately. All dimensions are approximate. For all offers applies: all information subject to change Goods are offered for collection. If you require shipping, please contact us.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 10110300330, Two industrial washing machines of the brand IPSO (HF304C) are offered. You can find details about the machines in the photos. Both machines have been used for approximately 300 hours. The price refers to both units. Hjdpfx Afjw Hgh Isienu Shipping and inspections are available upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,500 h, load capacity: 8,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Deutz, fork length: 2,400 mm, tire condition: 80 %, overall weight: 16,500 kg, Equipment: adjustable boom, cabin, head guard, lighting, pallet forks, retractable fork, sideshift, trailer coupling, SPECIAL DESIGN LIFTING HEIGHT 8 meters !! we are offering: FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, ready to drive !! Total weight approx. 15 tons !! RX 70-80 4-wheel diesel forklift used Year of manufacture 2016 Offer is aimed at tradespeople, dealers, public and church institutions! Please only serious inquiries!! We are offering items from various acquisitions, which we describe as best as possible and provide meaningful photos. Further information about the item cannot be provided. Due to time constraints, we can only offer answers to this article if you provide us with a telephone number with your inquiry. Unless expressly described, this offer is used goods. Item is ready to drive with signs of use. Existing defects can be discussed by telephone All offers from stock 47441 Moers. Manufacturer: STILL Type: RX 70-80 Load capacity 8000 kg Lifting height 8000 mm Fork adjustment device (double) Fork length 240 cm, double pair of forks Year of manufacture 2016 Hours: approx. 15,000 per forklift Weight: 15 tonnes per forklift Fork adjustment device Full cabin Height 4000 mm For data see photos. Other industrial trucks in stock!! Hnsdpfx Afovq I I Ejieu We offer the possibility of viewing on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by arranging an appointment by telephone. If required, the item can be taken away immediately. All dimensions are approximate Other offers from catering, storage technology, trolleys The following applies to all offers: All information is subject to change - photos are similar!!

Condition: used, functionality: fully functional, overall weight: 2,500 kg, NILFISK Cleaning Machine, Scrubber Dryer Model: CS7000 ecoflex Drive: electric, battery-powered Condition: see photos / excellent condition Test drive possible Item No.: CS7000 ecoflex Manufacturer: NILFISK Year of manufacture: see photo – visually excellent Hour meter displays "69" (likely new circuit board) Hydraulic discharge Hsdswylgispfx Afionu 4 brushes Electric operation Battery at full capacity Weight: approx. 2500 kg Will be handed over in working order, including charger Next NILFISK service due: 12/2026 New price with this configuration: approx. €98,000 Price quoted for collection ex stock 47441 Moers Various cleaning and scrubber dryers in stock We offer as shown in the pictures. Viewing is expressly encouraged. General information: We offer various items here, described as accurately as possible and supported by detailed photos. No further details can be provided for the item. You have the option to view the item by prior telephone arrangement on Tuesdays and Thursdays between 9:00 am and 4:00 pm. On request, the item can be taken immediately. Unless otherwise expressly stated, this offer is for USED EQUIPMENT. We sell as depicted in the photos. All offers are ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs vary by distance, approx. €800 net) All dimensions are approximate.