Used Oximat for sale (1,282)

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum - Gas powered oil heater and oil pump. More information to follow. Gjdpjw U A E Rofx Afijuh

Condition: good (used), Approx. 30lfm shelf rack system Schaefer R3000 Manufacturer: Schaefer R3000 as good as new, see pictures. upright, galvanized, 2,5 m height, depth 60 cm Shelves, galvanized, 200 kg load/ shelf, shelf width approx.100 cm Negotiable price: € 3.290,00 net ex stock Offer consists of: 31 pcs. uprights or frames, height 2,5 m, galvanized 90 pcs. Shelves, 200 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening 3 levels per field (of course more levels are possible against surcharge) Other combinations possible. Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly more than 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly on request. Gsdpfx Asccxuijfijuh Further information on request. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges. To get to our site, please click on our logo! broom-clean business evacuations company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Gujdpfx Afoxhfbtsioh Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Gjdpfx Asxg Izasfiouh Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Guodpfx Asxlcz Esfioh Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A diesel jaw crusher PE250X400 with a screen typically refers to a mobile jaw crusher equipped with a diesel engine that can be used for primary crushing of various raw materials, and it includes a screening system for separating the crushed material into different sizes. Here are key features and information about such a configuration: 1. Diesel Engine: - The diesel engine provides the power for the jaw crusher, making it suitable for locations where electric power may not be readily available or practical. Diesel engines are known for their durability and reliability. 2. Jaw Crusher (PE250X400): - The "PE250X400" indicates the opening size of the jaw crusher in millimeters. In this case, the jaw crusher has an inlet opening of approximately 250mm x 400mm, allowing it to crush various materials with different sizes. 3. Screening System: - The inclusion of a screen allows the crushed material to be separated into different sizes based on particle size. This is particularly useful for producing various grades of final products. 4. Mobile Configuration: - A mobile jaw crusher with a diesel engine and screen is often mounted on a mobile chassis, making it easy to move from one location to another. This mobility is especially beneficial for applications in construction sites or quarry operations. 5. Material Handling: - The raw material is fed into the jaw crusher, where it is crushed by the reciprocating motion of the movable jaw against the fixed jaw. The crushed material then passes through the screen, and different-sized particles are discharged accordingly. 6. Adjustable Output Size: - The jaw crusher typically has an adjustable discharge setting, allowing operators to control the size of the final crushed material. Gsdpfxoq Nfu Ee Afijuh 7. Applications: - Diesel jaw crushers with screens are commonly used in construction, mining, and quarrying applications for processing various materials such as concrete, gravel, rock, and other aggregates. 8. Maintenance and Operation: - Regular maintenance of the diesel engine, jaw crusher components, and the screen is necessary to ensure optimal performance and longevity. 9. Fuel Efficiency: - Diesel engines are generally known for their fuel efficiency, making them suitable for applications where a reliable power source is required without access to electrical grids. When considering a diesel jaw crusher with a screen, it's important to evaluate factors such as the required capacity, material hardness, and the desired final product specifications. Additionally, choose a reputable manufacturer known for producing reliable and high-quality mobile crushing and screening equipment.

Year of construction: 2000, condition: excellent (used), TORNOS DECO 2000 CNC automatic lathe TECHNICAL DATA Dimensions and weights Dimensions: length: 2000 mm width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor load: Approximately: 8 daN/cm2 Axles 1 movable headstock: Z1, S1 2 independent linear Guodpsmdn Imjfx Afish Tooling system on the vertical: X1 / Y1 (S6) - X2 / Y2, S2 1 front attachment, 4 spindles: X3 / Z3 1 independent pick-up spindle: Y4 / Z4, S4 1 independent tooling system in backworking: X4 (S5) General data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Max. Workpiece length: With rotating guide bush: 180 mm Work in clamp: 30 mm Main spindle speed: 12000 rpm Spindle rotation direction: Preferably: To the right Motorization main spindle: Continuous operation: 2,2 kW Intermittent duty: 3,7 kW Motorization tapping spindle: Continuous operation: 1,5 kW / Intermittent operation: 2,2 kW Headstock clamp type: F20 Guide bushes: rotating, fixed Type of F'bushing tongs: Master: 605 Number of tools in main operation: Fixed: 2 x 5 / Rotating: 3 + 3 Number of front tools: Fixed: 4 / Rotating: 3 Cross section of tools: 12 x 12 Tool tongs: Rotating Standard: ESX 20 Number of tools in backworking: Fixed: 3 + 3 / Rotating possible: 3 + 3 Bar feeder: Yes Parts removal: Basic version Machine type: Moving headstock Machine axis height: 1100 mm Headstock travel: 255 mm Bar guide position: To the right of the user Bar passage: 1-16 mm Telescopic tube passage: Bore: 6-17 mm Speed: Left / right: -12000 to 12000 rpm Headstock feed speed: Max. 20 m/min We do not take any responsibility for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 2,925 h, General Data Machine weight 725 kg Main Drive Spindle speed range 200–3000 rpm Guedpfxoxnr Hcs Afieh This Sunnen ML 2000 was manufactured in 2006. It's a horizontal honing machine featuring a diameter range of 1.5 – 165 mm for manual stroke and 1.5 – 95 mm for automatic stroke. Stroke length reaches up to 170 mm. It operates with a spindle speed variable from 200 to 3000 rpm and includes a 7.5 kW spindle motor. The machine weighs 725 kg and requires approximately 3.5 m² of space. Contact us for more information about this machine. Application Types Honing

Condition: used, functionality: fully functional, overall weight: 8,806 kg, maximum load weight: 27,000 kg, axle configuration: 3 axles, first registration: 05/2018, suspension: air, color: white, Year of construction: 2018, mileage: 10,296 km, total length: 13,400 mm, total width: 2,460 mm, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Gsdpfoxnrutex Afieuh Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Gjdoxnl Srspfx Afisuh

Year of construction: 2011, condition: used, Field of application: Construction Serial number: 110245xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20555 Specifications: Gjdpfx Aowph Egefieuh Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hours: 7200

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 2450 mm Guedpoxnr Erefx Afish Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Bending

Condition: used, Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet. Gjdexnl R Uopfx Afisuh

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Please provide reference number upon request: 18549 Gedpfxjvgy E Ue Afijuh Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500

Year of construction: 2022, operating hours: 3,973 h, condition: ready for operation (used), Main Drive Number of axis 4 Gujdpfx Afsxnd Ifoioh This Mitsubishi SG12S was manufactured in 2022. It features a 20-position automatic tool changer and linear glass scales on all axes. The machine includes approximately 300 liters of dielectric fluid, a complete set of original accessories, manuals, and a tool kit. Additional EROWA equipment is also included. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi SG12S machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Godpfexnl I Tjx Afisuh Click on the link below to see a video of the machine running.

Condition: used, Year of construction: 1998, operating hours: 28,000 h, Serial number: 5350V1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21531 Specifications: Gsdexm Tg Uopfx Afisuh Model year: 1998 Hours: approx. 28,000 Mileage: approx. 162,000 km Power: 187 kW / 251 hp Operating weight: 17,770 kg Tires: See pictures Drivetrain: 6x6 Condition: Working as it should 2 rotating beacons Radio/CD Air conditioning Description:Volvo A25C dumper from 1998. The machine is in operation and works well. It has run approximately 28,000 hours and can be delivered on short notice.Watch the video! Hours: 28000 Own weight: 17770 Model: A25C

Year of construction: 2020, operating hours: 16,597 h, condition: ready for operation (used), General Data Measurements width 2130 mm Measurements depth 2880 mm Measurements height 1990 mm Machine weight 7500 kg Control Unit Brand SIEMENS Model 840D-SL Main Drive Spindle speed range 5000 rpm Spindle motor power 24 kW Spindle bore Ø65 mm Number of axis 7 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Godpfoxnd Irex Afieuh Media Main electronic connection 60 kW Additional Equipment Coolant Tank Volume: Approximately 200 liters Hydraulic Tank Volume: Approximately 120 liters Central Lubrication Unit Volume: Approximately 2 liters Operating Current (IB): 76 A Rated Current of Protection Device (IN): 80 A This 7-axis SPINNER TTS 65-DUPLEX horizontal turning machine was manufactured in 2020. It features a spindle bore of Ø65 mm, a chuck diameter of 210 mm, and a maximum spindle speed of 5000 rpm. The machine includes a 3-meter bar loader, enhancing its productivity. With rapid traverses of 30 m/min and an acceleration of 0.5 g, it ensures efficient operations. If you are looking to get high-quality turning capabilities, consider the SPINNER TTS 65-DUPLEX machine we have for tact us for more information. Application Types Turning

Condition: used, Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 50 Litre Capacity Mixing Trough: Approximately 540mm x 320mm x 400mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 2.3 kW Also includes: Local controls, stainless steel hinged lid with clamps and perspex cover and stainless steel mobile frame. Click on the link below to see a video of the machine running. Gusdpfx Afsxnl Nqoijh Specifications: Capacity: 1.8 ft³ Material of construction: 316 Stainless Steel Horsepower: 3.1 hp Dimensions: 21.26 x 12.60 x 15.75

Condition: used, Please contact ATS Norway for more information Gjdov U R Icopfx Afieuh Please provide reference number upon request: 19929 Approximately 20-24 m long Unknown model year Unknown number of hours Own weight: 1 Model: m/ transportband m/ nødstopp

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Gsdpfx Afoxnl Iyeijuh Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Legs/Lugs: 4 legs with forklift attachment

Condition: used, Year of construction: 2022, operating hours: 845 h, Serial number: VATZ1852AZB07xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20337 Specifications: 2022 model Hours: approximately 845 Good tires 4x4 Weight: 6000 kg 55 kW Quick release Function 30 km/h Central grease SEE bucket 2100 Liters, 2.2 m wide SEE pallet forks Length forks: 120 cm Radio/CD Air conditioning/AC Service taken at Liebherr Last performed in 500 hours Ready for delivery Guodjwi Rr Nopfx Afish Description:Liebherr L506C wheel loader from 2022.The loader has only run 845 hours.Last service performed at 500 hours at Liebherr. HK-feste er L30 / Zettelmeyer 602 Z stangkobling. Sold with bucket and pallet forks. Hours: 845 Own weight: 6000 Total Weight: 6000 Km/t: 30 Kw: 55 Model: L506C

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximarely 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Godsxnl H Nspfx Afijuh Specifications: Capacity: 1,585 gal Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Straight Side: 1680

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Specifications: Guodpfxjxm T Hbe Afieh Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: used, Used Hosokawa Micron Ltd model MICRON RI 12 K322 CF inline disintegrating slurry mill. Product contact parts in stainless steel. Unit has a throughput capacity of approximately 100 to 120 cumt/hr (product dependent). Working pressure rated 10 bar with a design temperature of 0 to 100 deg.c. Unit is belt driven by 37kw motor. Unit is mounted on a mild steel stand. Godpfx Afjxm T Ekjijuh Click on the link below to see a video of the machine running.