Used Mobile Column Lifts for sale (34,232)

Year of construction: 2025, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. We deliver and install throughout the EU. Gjdpjhmfctjfx Afiekc

Condition: excellent (used), Year of construction: 2016, 1, 2 or 3-storey modular mezzanine warehouse platform, Profielnorm, main platform footprint approx. 33 x 79 m, or 3,221 m2, 250 kg/m2 – used – : The lower section of the mezzanine, approx. 4m, can be assembled as a standalone warehouse platform. Levels 2/3 can also be assembled as a two-storey mezzanine (floor heights approx. 2.50 m). Price per m2 ex location (net), dismantled, packed and loaded! Assembly: Single-storey: €35 (net) / m2 floor area Two-storey: €55 (net) / m2 floor area Three-storey: €75 (net) / m2 floor area Manufacturer: Profielnorm B.V. Supplier: DURKOPP Type: Column Year of production: 2016 Floor covering (not everywhere): chipboard and partly grating 2 staircases across all levels and approx. 2 additional staircases between levels 2 and 3 Including existing guardrails LOAD CAPACITY (evenly distributed load): 250 kg/m2 POINT LOAD (50x50 mm): 400 kg TOTAL HEIGHT: 4,298 mm CLEAR HEIGHT: 4,000 mm SURFACE AREA: 3,221 m2 Main platform: footprint approx. 33 m x 79 m PROJECT NUMBER: 15.537.DE Column spacing: approx. 5.11 m width and approx. 3.26 m depth Gkodpfxjwx Izyo Afijc Column dimensions: approx. 9 x 9 cm Top edge of chipboard 3rd level: approx. 7.20 m Ground floor: lower edge of beam approx. 4 m, bottom edge of chipboard approx. 4.27 m 1st upper level: lower edge of beam approx. 2.52 m, bottom edge of chipboard approx. 2.78 m Sigma profile: height approx. 19 cm / width approx. 10 cm 1231-tрг-1090-1-2013-a-157-2 EN 1090-520091A112011 PRO.DOP-15.537.DE Geometric tolerance: EN 1090-2 Weldability: steel 5235, 5275, 5355 according to EN 10025-2; 53306D, 525000 according to EN 10346 Fire behavior: KLF Cadmium release: KLF Release of radioactive radiation: KLI Durability: surface preparation according to EN 1090-2, preparation grade P1 Condition: good – very good Available: from August 2025 Location: Unna

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,500 mm, table length: 4,000 mm, table width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 5,000 mm Y-axis travel: 2,800 mm Z-axis travel: 1,500 mm Table length: 4,000 mm Table width: 2,000 mm Max. table load: 20,000 kg Spindle speed: 20 – 3,000 rpm Spindle power S1 = 100%: 30 kW Spindle power S3 = 60%: 35 kW Max. spindle torque: 1,250 Nm at 226 rpm Tool holder: ISO SK50 Number of tool changer positions: 100 Milling Head Automatic milling head: Index 2.5° Straight milling head: Index 1.0° Feed Rate Working feed rate: 2 – 5,000 mm/min Gksdpfx Ajxfiazefioc Rapid Traverse X-axis: 12,000 mm/min Y-Z-axis: 15,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC426CB Dimensions (L x W x H): 9,800 x 6,200 x 7,100 mm Machine weight: approx. 31,600 kg

Condition: new, functionality: fully functional, Year of construction: 2025, A compound cone crusher is a type of crusher used in mining and aggregate industries to break down rock into smaller pieces. It combines the advantages of both traditional cone crushers and modern technology to achieve higher efficiency, better product shape, and reliable operation. Here are its key features, working principles, and typical usages: ### Key Features: 1. Combination of Crushing Technologies: - Integrates both spring and hydraulic cone crushers to offer improved performance. 2. High Crushing Ratio: - Capable of crushing materials into fine and uniform sizes with high reduction ratios. 3. Durability: - Built with robust materials and components for long-lasting operation. 4. Adjustable Settings: - Allows for easy adjustment of the crusher settings to control the size of the output material. 5. Efficient Crushing Chamber: - Designed to minimize material clogging and ensure continuous operation. ### Working Principles: 1. Material Feeding: - Raw material is fed into the crusher through a hopper. 2. Crushing Process: - The material enters the crushing chamber, where it is crushed between a fixed cone (outer shell) and a moving cone (inner shell). - The moving cone is supported and driven by an eccentric shaft, which rotates and gyrates to crush the material against the fixed cone. 3. Adjustment Mechanism: - The gap between the moving cone and the fixed cone can be adjusted to determine the size of the output material. 4. Discharge: - Once crushed, the material exits the crusher through the bottom discharge opening. ### Typical Usages: 1. Mining Industry: - Used for crushing various kinds of ores and rocks, particularly in secondary and tertiary crushing stages. 2. Aggregate Production: - Ideal for producing gravel, sand, and crushed stone for construction and infrastructure projects. 3. Recycling: - Utilized for crushing construction waste and recycling materials to create reusable aggregate. Gjdpfxstxhybs Afiokc 4. Construction Industry: - Applied in producing concrete and asphalt aggregates, road base, and other construction materials. Types of Cone Crushers Standard Cone Crusher: Suitable for medium crushing tasks. Short Head Cone Crusher: Used for fine crushing applications. Hydraulic Cone Crusher: Equipped with hydraulic systems for improved operation. Multi-Cylinder Hydraulic Cone Crusher: Provides better control and higher productivity. Spring Cone Crusher: Uses springs to protect the machine from overloading. Applications of Cone Crushers Mining: Crushing of ores for further processing. Construction: Producing aggregates for roads, bridges, and buildings. Quarrying: Breaking down rocks for use in gravel or crushed stone products. Recycling: Processing of demolition debris and concrete. In summary, a compound cone crusher is a highly efficient, versatile, and durable piece of equipment ideal for various crushing applications in the mining, aggregate, recycling, and construction industries.

Condition: used, Year of construction: 2017, x-travel 6.000 mm y-travel 3.500 mm z-travel 1.500 mm Control iTNC 530 HSCI Heidenhain Max. Speed 15.000 min/-1 power capacity - main spindel 63 kW max. Torque 300 Nm swivellable A: 220° (+/- 110) ° rotatable C: 550° (+/- 275) ° tool taper HSK 100A DIN 69893 1+2 table surface area 6.000 x 3.500 mm max. workpiece length 4.940 mm max. workpiece width 2.440 mm max. workpiece height 970 mm number of toolpositions 26 pos. tool taper HSK 100A max. tool length 400 mm max. tool diameter 130 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 65 m/min feed speeds 65.000 mm/min total power requirement 150 kW weight of the machine ca. ~ 130,00 t Gkjdpfx Aev N N R Eefioc dimensions of the machine ca. 11,0 x 10,0 x 7,0 m CNC-Gantry Milling Machine FOOKE - Endura 908 linear - Fork-Turn-Swivel-Milling Head Type 8 (A+C Axis) - 5-Axis- and 5-Side-HSC-Machining (simultaneous) - High Dynamic - Construction - Setup with FOOKE possible as an option

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. Gkjdexna Uzopfx Afisc ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 2011, operating hours: 10,825 h, Adjustable boom, stick approx. 2450 mm, quick coupler system SW48, 800 mm digging bucket, grab and hammer equipment, central lubrication system, air conditioning, rear-view camera, last inspection at 9970 operating hours, good condition, vehicle may be stickered and/or labeled with advertising. Godoxnhimspfx Afiekc Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be pleased to provide you with a quotation from our partner workshops! Vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this unit. Please contact us!

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 193 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Condition: Refurbished without warranty Technical condition: Good Front tyres type: cushion Front tyres size: 16-5-11 1/4 Front tyres condition: 80 - 100% Rear tyres type: cushion Rear tyres size: 16-5-11 1/4 Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Gksdpfxexnfdbs Afioc Battery year: 2025 Battery condition: 80 - 100%

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 466 h, load capacity: 200 kg, empty load weight: 2,735 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,655 mm, drive type: Elektro, construction width: 1,000 mm, working height: 10,000 mm, Vertical Lift Platform Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Solid rubber Gkedpfoxnd Uxex Afijc Front tires size: 406/127-266.7 Rear tires type: Solid rubber Rear tires size: 406/127-266.7 Battery voltage: 24V Battery capacity: 240Ah Battery year: 2025 Description: In addition to this Haulotte model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under attractive conditions are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with comprehensive advice on this STAR 10-1. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to sell your vehicle on consignment in our showroom.

Condition: new, Year of construction: 2025, Introduction Of Jaw Crusher Plant The capacity vary according customer request. And in order to meet the different demands of customers, the production line can equip with cone crusher, dust removal equipment and other equipment. It is suitable for the materials like hard limestone, granite,basalt, pebble, metallurgy slag and artificial sand making work. It is widely used in the industries of hydroelectric, building materials, highway, and urban construction. And according to different technological requirement, various types of equipment can be combined to meet the demands of different customers. Product Advantages of Stone Crusher Machine Plant 1.High reliability, good stability 2.Convenient maintenance, easy operation 3.Low operation costs, wide application range 4.Laminating crushing makes good discharging grain shape We also provide other stone crushing solutions like 1. Vibrating feeder + Jaw crusher + Fine jaw crusher + Vibrating screen 2. Vibrating feeder + Jaw crusher + Impact crusher + Vibrating screen 3. Vibrating feeder + Heavy hammer crusher + Vibrating screen 4. Sand Production Line 5. Gravel / Aggregate production line Gedpfx Aeq Nyy Eefijkc A stone crushing plant for sand and aggregate production involves several stages and equipment. Here's an overview of the process and the main components involved: Process Overview 1. Primary Crushing: Large stones from the quarry are fed into a primary crusher, typically a jaw crusher, which reduces them to smaller, manageable sizes. 2. Secondary Crushing: The output from the primary crusher is further reduced in size by a secondary crusher, usually a cone crusher or impact crusher. 3. Screening: The crushed material is separated into different size fractions using vibrating screens. Oversized material is returned to the crushers for further reduction. 4. Sand Making: For producing sand, the material might be passed through a sand making machine, like a vertical shaft impact crusher, to achieve the desired shape and size. 5. Washing: The final product is often washed to remove impurities and improve the quality of the aggregate. 6. Stockpiling: The finished product is stored in stockpiles before being transported to customers. Main Components of stone crushing plant 1. Jaw Crusher: Used for primary crushing of large stones. 2. Cone Crusher or Impact Crusher: Used for secondary crushing to produce finer aggregates. 3. Vibrating Screen: Separates the crushed material into different size fractions. 4. Sand Making Machine: Special equipment for producing sand. 5. Belt Conveyors: Transport materials between different stages of the process. 6. Vibrating Feeder: Feeds raw material into the crushers evenly and continuously. 7. Sand Washer: Cleans the sand by removing impurities. 8. Control System: Manages the entire process, ensuring efficient and safe operation. Implementing a well-designed stone crushing plant can significantly increase production efficiency and produce high-quality sand and aggregate.

Condition: used, Year of construction: 2010, x-travel 6500/13500 mm y-travel 4000 mm z-travel 1500 mm w-travel 2250 mm Control SIEMENS 840 D table surface area 5500/12500 x 3000 mm distance between columns 3800 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 50000/75000 kg ram head dimension 520 x 625 mm spindle speed 5000 U/min milling spindle motor 63 kW max. torque on the spindle 2900 Nm Tool bore DIN 69893 HSK-A 100 feeds x/y/z 24 m/min Gksdpfewa Dxqex Afijc feed w-axis 6 m/min rapid traverse x/y/z 40 m/min total power requirement 120 kW weight of the machine ca. 250 t dimensions of the machine ca. 29,5 x 9,5 x 8,2 m Equipment / Accessories: - automatic tool magazine for 212 tools - automatic milling head magazine for 6 milling heads - Machining modules/ Milling heads: 1. Machining module -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2. Machining module -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3. Machining module -angle BM extended- 40 kW, 4000 rpm, 1800 Nm, HSK-A 100 4. Machining module -angle BM - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5. Machining module -angle BM - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6. Machining module -Universal Index BM - 40 kW, 4000 rpm, 2100 Nm - C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 - Measuring probe - Coolant device - Chip conveyor - Technical documentation

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobile EA160A Ø suction 160 mm Year of construction 2006 Weight 310 kg Gsdpfxorbiiwj Afiokc Nominal volume flow 2050 m³/h Minimum volume flow 1447 m³/ 3 kw Automatic cleaning

Condition: used, travel distance X-axis: 3,500 mm, 5-Axis Travelling Column Milling Machine – FPT Industries S.p.A. Operating times: The machine has been operated since 2012 exclusively in single-shift mode for custom-made, special production. Type: Travelling column milling machine with integrated rotary table Year of manufacture: 2012 – Made in Italy Condition: Used, in very good condition (single-shift operation) Control: Heidenhain 530 Operating hours: approx. 30,000 Milling head: Automatic, swiveling head (TUPC) for simultaneous 5-axis machining, 360° freely adjustable Integrated rotary table: 1,000 × 1,000 mm Tool holder: ISO 50 Travel paths: X = 3,500 mm, Y = 1,100 mm, Z = 1,500 mm Further data: Worktable including rotary table: 3,800 × 1,000 mm Spindle speed: 9,000 rpm Tool magazine: 2 × 24 slots (left/right, horizontal & vertical) Gksdjxnbbispfx Afisc Maintenance and refurbishments: 2020: Y & Z axes overhauled, new ball screws installed 2022: X axis overhauled, new ball screws on all axes 2022: Spindle head overhauled All further details upon explicit request. Videos can be sent to you via WhatsApp.

Condition: used, Year of construction: 2003, Travel paths (X/Y/Z): 3,000x3,000x1,200 mm, 60-position SK50 tool changer, automatic angle head, rotary table, control: HEIDENHAIN iTNC 530, 1 band filter system KNOLL PF 100/1000, year of manufacture: 2003, 1 chip conveyor Gkodpfxexnak No Afioc

Condition: used, Year of construction: 1977, operating hours: 7,150 h, Please contact ATS Norway for more information Please provide reference number upon request: 20124 Gkodpfx Aewdvkyjfiec Specifications: Model year: 1977 Hours: approx. 7150 Tires: See pictures Outriggers and crane work Starts and runs Wire lubricated regularly Description: Moelven MK693 mobile crane from 1977. The crane starts and runs, both the outriggers and crane work. The cylinder on the jib is broken, and the brakes are in good condition. The machine has otherwise been maintained with regular lubrication of the wire. Can be delivered at short notice. Hours: 7150 Own weight: 111 Model: MK693

Condition: good (used), Year of construction: 2006, operating hours: 33,044 h, functionality: fully functional, machine/vehicle number: 86624, travel distance X-axis: 3,500 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, mount diameter: 40 mm, total width: 4,000 mm, total height: 3,400 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 600 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, overall weight: 20,000 kg, number of slots in tool magazine: 36, TECHNICAL DATA & EQUIPMENT: Operating voltage: 3 x 400 V Frequency: 50 Hz Max. rated current: 100 A Connection: 55 kVA Table with 5 T-slots Note: machine vices shown in the photos are not included Includes 36-position tool changer, chip conveyor, and coolant system COLLECTION NOTES: Collection must be definitively arranged between December 10th and 12th Gksdpfx Aexm S Iksfioc FCA Winterlingen, loaded onto truck

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW TRAVELLING COLUMN MILLING MACHINE Control and Drives: Two HEIDENHAIN TNC 640 digital path controls (one at the front of the machine and one in the rear cabin) HEIDENHAIN package (motors, measuring systems, and handwheel) Additional Equipment: Tool changer with double gripper, 60 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ± 0.040 mm Repeatability: ± 0.008 mm Gkedpfxsm Tv D Aj Afiec Only inquiries from Germany will be answered.

Condition: new, Year of construction: 2025, Continuous/standard drilling capacity (mm): 20/23 (in E335/ST60) Tapping capacity (thread pitch dependent): M12 Spindle: MK II Spindle speed (stepless): 40–4000 rpm Drilling depth (mm): 100 Throat depth (mm): 240 Column diameter (mm): 82 Usable work surface (W x L) (mm): 340 x 280 T-slot size (arm), spacing (mm), width (mm): Number: 2, 125, 13/26 Speed display: Digital Drill depth display: Digital Drill depth stop: quickly adjustable stop ring Feed (mm/rev): manual Table height adjustment with rack and pinion Three-phase motor 400V with frequency inverter (kW): 1.5 Spindle/work surface distance (mm): 160 – 880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quick-adjust, ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Gjdeir Ir Topfx Afiskc Thermal overload protection Spindle stop Drill guard with electric interlock Connection cable with CEE plug 3-year warranty for single-shift operation Delivery free to site NOT THE RIGHT MACHINE? WE ARE A FLOTT AUTHORIZED PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! ASK US FOR AN OFFER!

Condition: good (used), Heidelberg VFZ 52 Mobile knife folding unit The machine is in very good condition, ready for production. Can be connected to virtually any Heidelberg machine model. Mounted on wheels for easy movement. Gjdpfoxmu U Hox Afiokc Independent controls. New belts.

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: F130507, throat depth: 320 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, total height: 2,050 mm, drilling capacity: 30 mm, column diameter: 120 mm, total width: 510 mm, total length: 870 mm, spindle mount: MK 3, drilling depth: 135 mm, table width: 450 mm, table length: 500 mm, input voltage: 400 V, height adjustment type: mechanical, Dear Sir or Madam, We are offering a demonstration pillar drill "HXMC model Z5030A" with paint damage. We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. Gsdjv T Atnjpfx Afiokc No returns accepted.

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units Gjdoxmr Uqopfx Afijkc • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: used, functionality: fully functional, machine/vehicle number: 127963, throat depth: 230 mm, spindle speed (max.): 1,880 rpm, spindle speed (min.): 160 rpm, total height: 1,800 mm, column diameter: 102 mm, total width: 420 mm, total length: 800 mm, spindle mount: MK 3, drilling depth: 130 mm, overall weight: 190 kg, type of input current: three-phase, input voltage: 400 V, Dear Sir or Madam, Gkedpfov T Ax Djx Afisc We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 106570506, throat depth: 250 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 120 rpm, total height: 1,700 mm, column diameter: 92 mm, total width: 720 mm, total length: 900 mm, spindle mount: MK 4, drilling depth: 120 mm, table width: 430 mm, table length: 480 mm, overall weight: 135 kg, type of input current: three-phase, input voltage: 400 V, Dear Sir or Madam, We are happy to answer any questions. Gkjdpfxsv T A Dms Afisc This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: used, functionality: fully functional, machine/vehicle number: 294, spindle speed (max.): 1,250 rpm, spindle speed (min.): 40 rpm, total height: 2,300 mm, drilling capacity: 50 mm, total width: 970 mm, total length: 1,300 mm, spindle mount: MK 5, drilling depth: 240 mm, table width: 870 mm, table length: 670 mm, overall weight: 1,200 kg, Dear Sir or Madam, Gkodpfjv T Aurjx Afijc We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: I1305008, throat depth: 250 mm, spindle speed (max.): 2,880 rpm, spindle speed (min.): 125 rpm, drilling capacity: 25 mm, column diameter: 110 mm, spindle mount: MK 3, drilling depth: 130 mm, overall weight: 320 kg, type of input current: three-phase, input voltage: 400 V, height adjustment type: mechanical, Dear Sir or Madam, Gedpfjv T Anrox Afijkc We are offering a demonstration pillar drill "HXMC model Z5025" with paint damage. We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.