Used Mitsubishi for sale (391)

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm Bedpox Enknsfx Abbewh • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: ready for operation (used), Year of construction: 2009, Load capacity: 1800kg, drive wheels: single, rated power: 42kW, lift height: 3290mm, load center: 500mm, mast model: 5V15C33, operating hours: approx. 1116h. Documentation available. An on-site inspection is possible. Bjdpfx Aeycwt Ssbbewh

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: FW907009F, load capacity: 70 kg, arm reach: 2,050 mm, controller model: CR760-70VD1-1-S15, repeat accuracy: 0.07 mm, operating speed: 13,000 mm/s, TECHNICAL DETAILS Payload: 70 kg Maximum reach: 2,050 mm Repeatability: ±0.07 mm Protection class: IP67 Speed: 13,000 mm/s Working ranges J1 (rotational axis): 330° J2 (tilting axis): 215° J3 (arm axis): 261° J4 (wrist rotation axis): 720° J5 (wrist tilting axis): 250° J6 (wrist rotation axis): 900° MACHINE DETAILS Power consumption: 20,000 VA Power supply: 3-phase, 180-253 VAC Controller (CE version): CR760-70VD1-1-S15 Hand controller (Teaching box): R56TB (new) Dimensions & Weight Bwjdeycq Hxopfx Abbeh Dimensions (L x W x H): 1,955 x 648 x 1,852 mm Width: 648 mm Height: 1,852 mm Robot weight: 640 kg Controller weight: 200 kg

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, number of axes: 5, This 5-axis Mitsubishi MV2400 S wire EDM machine was manufactured in 2016. It features a 600 mm X-axis travel, 400 mm Y-axis travel, and 310 mm Z-axis travel. Capable of handling workpieces up to 1500 kg, it offers dimensions up to 1050 mm in length and 820 mm in width. Consider the opportunity to buy this Mitsubishi MV2400 S wire EDM machine. Contact us for more information. Bwsdpjx Urafjfx Abbsh • Maximum workpiece length: 1050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1500 kg

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, overall weight: 3,725 kg, product length (max.): 2,145 mm, This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine. Bedpfex Uq Sysx Abbswh • Maximum Workpiece Dimensions: 850 x 640 x 250 mm • Maximum Workpiece Weight: 700 kg • Maximum Electrode Weight: 50 kg • Table Dimensions (LxW): 700 x 500 mm • Table Surface: Stainless steel • C-axis with Erowa Chuck: 152.5 – 452.5 mm • Maximum Dielectric Filling Level Stroke: 300 ml • Filtration System: Yes • Tank Capacity: 400 L • Filter Particle Fineness: 3 / 2 µm • Dielectric Temperature Control: Yes • Pulse Generator Power Supply with Transistor Control • Cooling Method: Fully Sealed, Indirect Air Cooling Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2013, load capacity: 13 kg, controller manufacturer: MITSUBISHI, number of axes: 6, This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. It's equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information. Axis Operating Range: • J1 (Base Rotation): ±240° (Total 480°) • J2 (Shoulder): -150° to +90° (Total 240°) • J3 (Elbow): -72.5° to +95° (Total 167.5°) • J4 (Wrist Yaw): ±200° (Total 400°) • J5 (Wrist Pitch): ±120° (Total 240°) • J6 (Wrist Roll): ±360° (Total 720°)Axis Power: • J1 (Base): 1500 W Bedpfx Abjx D H Nkobewh • J2 (Shoulder): 1500 W • J3 (Elbow): 750 W • J4 (Wrist Yaw): 400 W • J5 (Wrist Pitch): 200 W • J6 (Wrist Roll): 100 W

Condition: used, Complete Corrugator width 2500: 3 single facer MITSUBISHI 50C (onda C,B,E) Bwjdpfx Abeycgazebeh 7 Mill Roll Stand liner Martin 7 Splicer Liner Marquip 1 Mill Roll Stand liner Agnati year 2004 Gluer Peters year 1994 HOT PLATES Martin HI-Trac II Rotary Shear Agnati HRS 90 year 2003 Slitter Scorer Agnati Power Set year 2003 Cutt off Agnati TR/EL 90 year 2003 Stacker New Enginering

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" Bwsdpfx Aox Hp Nhjbbsh *

Condition: excellent (used), Shell end millsHinge cuttersHinge cuttersMake MitsubishiType SPX4R05034BT50NMLength 340 mm Bedpfed Hfi Uex Abbewh

Condition: excellent (used), Turning tools with rotating cutting plate Type: RRSDR 3232P12 Bwsdpfx Asd Hflaobbjh Make Mitsubishi Length 165 mm

Year of construction: 2016, condition: as good as new (ex-display), Face milling cutter Make Mitsubishi Type AHX 640 W-315 CA28 R Bsdpfefmxh Tex Abbswh Diameter 315 mm Weight 31 kg

Year of construction: 2019, condition: as good as new (ex-display), multifunctional end face mill Make Mitsubishi Type SPX4RO 5034 BT 50 NM Bwodpfx Abofcrwcjbeh diameter 50 mm 157 mm max. cutting depth 339 mm Total length 190 mm roll length = maximum immersion depth tipped with carbide plates VP 15 TF

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter - Face milling cutter Make Mitsubishi Type AHX 640 W 160 C 22 R Multicorner Bedjfc Tq Espfx Abbowh Face milling cutter for high feed rates for 22 heptagonal inserts Cutter diameter 160 mm

Year of construction: 2016, condition: as good as new (ex-display), Face milling cutter Bjdpfefmch Iex Abbewh Cutter head Make Mitsubishi Type AHX 640 W-315 CA28 R Diameter 315 mm Weight 31kg

Condition: new, power: 110 kW (149.56 HP), overall weight: 6,000 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space width: 1,800 mm, loading space length: 3,000 mm, loading space height: 400 mm, Year of construction: 2025, total width: 1,700 mm, total height: 2,000 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fuso Canter 6S15 3-Way Tipper New Generation with Winter Package (incl. VAT) Immediately Available * 3.0L Turbo Diesel Engine 110 kW / 150 HP EURO 6 * Start/Stop System * 5-speed Manual Transmission * Wheelbase: 2500 mm * Payload approx. 2,900 kg * Rear axle twin tyres with differential lock * Traction tyres 205/75 R16C * Four-wheel disc brakes * Electronic Stability Program (ESP) * ABS with electronic brake-force distribution * Towbar with ball coupling * Electric windows * Central locking with remote control * Immobiliser * Adjustable steering wheel and steering column * 7-inch radio with Apple CarPlay and reversing camera * Digital tachograph * EC-type approved driver’s log Bwedpeyb U Uksfx Abboh * Over-windshield & behind-seat storage * Double passenger bench * Driver’s seat with armrest * LED headlights * Tilting cab * Automatic climate control * Lane departure warning system * Emergency braking assistant * Lane keeping assist * Multifunction steering wheel controls * 3-way tipper body from Scattolini incl. side toolbox 3200x1800x400 mm, rear swing tailgate, lashing eyes in the floor, side transport box 3 years manufacturer’s warranty up to 100,000 km Hilltip Winter Package: Snow plough 2.20 m, hopper spreader 1.1 m³ incl. control console * Other cab variants, wheelbases & body types in stock or available at short notice. Please enquire! You can find more vehicles from Fuso Canter and Multicar, as well as various container sizes at: Leasing / Financing / Trade-in * ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted * Our terms and conditions apply.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,200 h, load capacity: 2,500 kg, lifting height: 135 mm, fuel type: electric, construction height: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Low-level order picker Load center of gravity: 600 Technical condition: good Battery voltage: 24V Battery Ah: 500Ah Battery type: PzS Bedpfx Aswdz Dlsbbswh Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel, or LPG forklifts – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: • Purchase and rental of forklifts and warehouse equipment • Purchase of used equipment and logistics • Cross-manufacturer service: repairs, maintenance, inspections Load protection grids,

Condition: used, functionality: fully functional, machine/vehicle number: SFB310, Year of construction: 2022, operating hours: 1,420 h, load capacity: 5,000 kg, lifting height: 5,550 mm, free lift: 1,793 mm, fuel type: electric, mast type: triplex, construction height: 2,670 mm, fork length: 1,200 mm, empty load weight: 7,991 kg, total length: 4,025 mm, drive type: Elektro, construction width: 1,450 mm, Electric 4-wheel forklift truck Chassis number: SFB310 Load center: 500 Bwjdpslrq H Rjfx Abbeh ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: very good Front tires type: Superelastik Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: Frabat Battery year of construction: 2022 Battery condition: 80 - 100% Description: Find the right used forklift truck for you now! STA-TECH offers you a large selection of used equipment. Regardless of whether you need a pallet truck, electric, diesel or LPG forklift - with our extensive range of inexpensive, ready-to-run used forklifts to new forklifts, we offer you a suitable solution! Here you can find more used forklifts from our stock: sta-tech/used-forklifts STA-TECH is your partner for: ● Purchase and rental of new and used forklift trucks and warehouse technology ● Purchase of used equipment and uncomplicated logistics ● Comprehensive, manufacturer-independent service - from repair and maintenance to testing 3rd valve, 4th valve, rear work lights, front work lights, full cab, air conditioning, scales,

Condition: like new (used), Year of construction: 2023, Mitsubishi SBR16N2 Axia EX Stand-Up Stacker If you want to maximize the efficiency of your warehouse space, stand-up stackers can be the perfect choice. Combining compact dimensions with a tight turning radius and excellent operator protection, they offer an affordable and flexible alternative to VNA solutions. The fully protected operator position within the chassis allows for easy maneuvering, even in narrow aisles. Enhanced Stability System (ESS) In addition to the highly stable chassis design, there are additional automatic systems that reduce acceleration during sharp turns and decrease speed when the forks are raised above 1.7 m. Ergonomic Control with Trailing Forks During long journeys with trailing forks, this additional speed control allows the operator to maintain a more comfortable, forward-facing position. (Optional) Intelligent Cornering System The stacker detects the angle of a turn and automatically reduces speed in a timely manner. This ensures significantly safer handling with maximum stability and precise, positive cornering. Built-in lithium-ion battery Fast charging eliminates the need for additional batteries and enables 24/7 operation. Exceptionally high battery and charging efficiency State-of-the-art technology delivers up to 30% higher energy output than lead-acid batteries. Fast charging function Just 15 minutes of charging is enough to keep your forklift running for several more hours. It takes a maximum of 1 to 2 hours to fully recharge a completely discharged battery. Powerful AC drive motor High torque for greater efficiency. The absence of carbon brushes reduces maintenance requirements. Conical, angled fork tips Access to pallets in racks or when block stacking is easier, faster, and safer. (Narrow-track models) Robust, unobstructed view mast Optimized design guarantees excellent visibility of the forks and the load. Exceptionally smooth, jerk-free transition between mast stages Vulkollan dampers ensure quieter movements throughout the entire lifting range. Operator overhead guard Protection for the operator while maintaining excellent visibility. Specification Manufacturer: Mitsubishi Series: SBR Model: Axia EX Nominal lifting capacity at load center: 1.6 t Wheelbase: 1.496 m Tires: V 1x+2/4 Transport length: 2.069 m Transport width: 0.94 m Transport height: 2.31 m Load center of gravity: 600 mm Bsdpfsya A Ngox Abbewh Lifting height: 4200 mm Travel motor: 2.7 kW Lifting motor: 4 kW Battery capacity: 24/775 V/Ah Battery: Lithium-ion battery Drive control type: Alternating current (AC) Empty weight: 1.756 t Battery weight: 0.61 t Travel speed with/without load: 10 km/h Lifting speed with/without load: 0.15/0.32 m/s Lowering speed with/without load: 0.45 m/s Max. gradeability: 6.7 % Turning radius: 1,716 m Fork dimensions (thickness, width, length): 70 / 180 / 1170 mm Sound pressure level at the driver's seat: 70 dB(A) Battery charger: Yes Year of manufacture: 2023 You can find more items – new and used – in our shop! Shipping costs abroad on request!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,760 mm, total width: 2,025 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 640 mm, table length: 540 mm, empty load weight: 2,700 kg, Equipment: documentation/manual, USED ​​MITSUBISHI MV1200-S Wire EDM Bedpfxexlc Eqj Abbswh

Condition: used, Year of construction: 2012, operating hours: 554 h, functionality: fully functional, Mitsubishi FB16CPN Electric Forklift truck. In very good condition and working order. Year 2012 1 pervious owner from new! Have original purchase receipt of £20k plus. Truck is registered With the UK DVLA to be able to drive truck on the road. Digital Display allows you to see what speed you are doing and also displays the weight you are lifting. Comes complete with Single Phase Battery charger, Spare keys and Handbook. See last photo of trucks Features. Collection and inspection is Tadley UK (Near Reading) Specification: Mitsubishi FB16CPN Electric Folklift truck Capacity: Nominal 1600kg at 500mm Load centre With sideshift: 1600kg at 500mm Load centre at full height With sideshift: 1425kg at 600mm Load centre at full height Mast: Simplex 2 stage clear view Lift height: 3290mm Closed height: 2125mm Tyres: Solid Pneumatic profile Bwodpfxox Nbn Io Abboh Folks: 1000mm Long Single phase battery charger

Condition: used, Year of construction: 2004, 1 wire EDM machine, manufacturer Mitsubishi, model FA 20, year 2004, with filtration unit, internal no. 13 Bedpfxjyaw Sie Abbjwh

Condition: used, mileage: 126 km, power: 110 kW (149.56 HP), first registration: 01/2026, fuel type: electric, maximum load weight: 986 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 3,400 mm, color: other, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: other, loading space volume: 3 m³, loading space length: 4,200 mm, loading space width: 2,000 mm, loading space height: 400 mm, Year of construction: 2023, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is stated, it is based on the current daily exchange rate. The valid currency is that of the vehicle location. Wheel configuration: 4x2, single cab, payload 2 t, gross vehicle weight up to 6 t, wheelbase 3400 mm, heated mirrors, reverse warning system, driver airbag, radio with Bluetooth. Bwsdpfx Aex Hbqkobbjh

Condition: used, power: 96 kW (130.52 HP), fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, NEGOTIATION RESERVED - We accept trade-ins for any vehicle, subject to appraisal. - Financing or leasing options available for any amount, tailored to the customer’s requirements. Bodpfx Abjvy Ncpebowh We are SPECIALISTS in handling remote transactions, offering you the best solution to purchase our vehicles even if you live far from the Province of Bergamo. We recommend verifying the features of the listed vehicle. Lodotruck S.r.l. declines any responsibility for possible unintentional discrepancies with the description in the advertisement. If you are interested in the vehicle, please include your city and phone number when replying to this ad. In case of a trade-in, please specify: make, model, color, month and year of first registration, mileage, main features, gearbox type, kW/HP, and overall condition of the vehicle (preferably with attached photos). Providing this information will allow us to respond more quickly. CUSTOMER SERVICE OPENING HOURS: Monday to Friday: 8:30 am – 12:30 pm / 2:00 pm – 6:30 pm Saturday: 8:30 am – 12:30 pm Contact us at

Condition: excellent (used), functionality: fully functional, mileage: 180,000 km, power: 11 kW (14.96 HP), first registration: 03/2017, fuel type: diesel, color: red, Year of construction: 2017, Equipment: ABS, air conditioning, airbag, MITSUBISHI FUSO CANTER PRIS-MAG Hooklift EURO 6 Year 03/2017 Diesel Displacement 2998 cm³ Power 110 kW (150 HP) Manual Transmission Gross Weight 7490 kg Wheelbase 2750 mm Climate Control ABS Radio Mechanical Suspension Bodpfx Aboxzd Apobjwh Electric Mirrors and Windows 180,000 km.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck - 48V 3PZS 375AH - DIN B Bodpfx Abowzuzxebjwh + 1-year warranty + includes automatic filling system (Aquamatik) + includes end cable & REMA 320 connector (other connectors can be installed on request) + Capacity: minimum 90–100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,030 mm Width: 349 mm Height: 627 mm Weight: approx. 580 kg Compatible with the following models and others: Daewoo BR14 Daewoo BR14 JW Daewoo BR16 Daewoo BR16 JW Fpsbqvmgyjwqdq Isyoi Mitsubishi FB15TCA Common battery sizes available on request. Transport available.