Used Mitsubishi Electric Motor for sale (336)

Condition: new, Travel X / Y / Z 600 / 400 / 310 mm Travel U / V 150 / 150 mm Taper angle / workpiece height 15 degrees / 260 mm; 30 degrees / 110 mm Maximum workpiece dimensions W x D x H 1050 x 820 x 305 mm Maximum workpiece weight 1500 kg Table dimensions W x D 840 x 640 mm Table design Hardened 3-side table Possible wire diameters 0.1-0.3 mm Wire spool capacity 10 kg Automatic wire threader / wire chopper Yes / Yes Overall dimensions W x D x H 2687 x 3030 x 2150 mm Machine weight 3500 kg Mains voltage 3-phase 400 V/AC +/- 10%, 50/60 Hz, 13 kVA Filter tank capacity 860 l Filter particle size / elements 3 um / 2 Temperature control Dielectric cooling unit Filter dry weight 350 kg Generator power supply unit Regenerative transistor pulse type Generator cooling method Fully sealed / indirect air cooling Maximum output current 50 A Generator dimensions W x D x H 600 x 650 x 1765 mm Generator weight 240 kg Hjdpfx Aaozgwq Rj Eenp Input method Keyboard, USB flash drive, Ethernet, 19 inch touchscreen Control system CNC, closed-loop Minimum command step X / Y / Z / U / V 0.1 um Minimum axis resolution 0.05 um Key equipment Tubular shaft drives with linear scales; Control M800 with 19 inch full-touch monitor; Hand pilot with configurable LCD monitor; Automatic vertical front door; Digital AE II generator; Ethernet/DNC/FTP; 2D Cam Magic on-board; Sleep mode

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 14 kg, load capacity: 3 kg, arm reach: 400 mm, Number of Axes / Scara (Horizontal Type) / 4 Axes Hnedpfeza D Htox Aa Eep Maximum Load Capacity / 3 kg Z-axis Stroke / 180 mm Accuracy / ±0.01 mm in the X-Y and Z axes, ±0.01° in the rotation axis Maximum Speed / 7200 mm/s Weight / 14 kg Environmental Protection Class / IP20 Mounting Type / Floor-mounted

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: MITSUBISHI, controller model: CR750-04VD1-1-S15, number of axes: 6, This 6s Mitsubishi Electric RV-4FLM robot arm was manufactured in 2018. It features a reach of approximately 649 mm and a payload capacity of up to 4 kg, making it suitable for various industrial automation applications. Consider the opportunity to buy this Mitsubishi Electric RV-4FLM robot arm. Contact us for further details. • Quantity: 2 similar robots available • Reach: approx. 649 mm • Payload: up to 4 kg (nominal 3 kg) • Repeatability: ±0.02 mm • Protection class: IP67 • Controller: CR750 • Teach pendant: R32TB (handheld device) • Connection: Robot-to-controller cable included Hjdpfx Ajyhddnsa Eonp • Suitable for applications in industrial automation

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Additional equipment • Wire diameter: 0.1 – 0.3 mm Machine Benefits Technical Machine Benefits • Table dimensions: 840 x 640 mm • Max. Taper angle: 15/260 • Power supply: 3pe 50/60 hz ac200/220v (35 a) • Air source: 0. 5 mpa (75 l/min) • Pc technology with 15" lcd color screen, touch screen, and mouse • Electronic manual control panel Hnedpfx Aox D Iv Sja Ejp • Machining support with 2d/3d cam and graphics verification Extra Information Machine still under power

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, table load: 1,500 kg, Equipment: cooling unit, documentation/manual, Mitsubishi FA20-VS Wire EDM (2006) We offer for sale a high-quality Mitsubishi FA20-VS wire EDM machine, year of manufacture 2006. The machine is in very good technical condition and can be fully tested under power. Basic Technical Data Manufacturer: Mitsubishi Electric Model: FA20-VS Year of manufacture: 2006 Control system: Mitsubishi CNC Axis travels: X: 500 mm Y: 350 mm Z: 300 mm Table size: approx. 780 × 630 mm Max. workpiece weight: approx. 1500 kg Wire diameter: 0.2 – 0.3 mm Machine Advantages • Stable and precise Mitsubishi construction • Suitable for toolshops and series production • Reliable technology with low operating costs Condition and Delivery Hsdpfeyvhtwox Aa Eonp The machine can be personally inspected under power. Delivery may include: • Installation at customer site • Commissioning • Basic operator training Installation can be provided across the entire EU.

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Hedpfju Ur Rasx Aa Eenp

Condition: new, Mitsubishi AC servo motor HC202BS IEC34-1 Without encoder, unused with traces of storage, 100% functional, scope of delivery as per photos Hodpfjqx A H Ujx Aa Eenp

Condition: ready for operation (used), Mitsubishi SE-EV-FV AC spindle motor, serial number as shown in the photo, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, without cooling fan, normal signs of wear, 100% functional. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Hodei D I S Topfx Aa Ejnp

Condition: ready for operation (used), Mitsubishi Electric MECHA CR750-07VLD1-1-S15 robot controller SN: F1A803065M, used, in good condition, fully functional, scope of delivery as per photos. The following components are also available in our shop: connection cable "Mitsubishi Electric BKO-FA0741H07-D" / robot "Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot" / connection cable "Mitsubishi Electric BKO-FA0739H07-D". Hnedpfx Ajx Dw Nnja Esp

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Hedpex Dw Nuofx Aa Ejnp

Condition: ready for operation (used), Mitsubishi HD80-11SP DC servo motor SN: N77805021 with Sanyo Denki RST-5XC-11P mounting SN: 021122010D, used, in good condition, 100% functional, scope of delivery as per photos Hnjdpfx Aew E Uxrea Ejp

Condition: ready for operation (used), Mitsubishi Electric CR750-07VD1-1-S15 robot controller SN: F1A606002M, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. The following components are also available in our shop: Connection cable "Mitsubishi Electric BKO-FA0739H05-D" / Robot "Mitsubishi Electric RV-7FM-D1-S15 industrial robot" / Connection cable "BKO-FA0741H05-D". Hjdpfx Ajx Dw Nbea Esnp

Condition: ready for operation (used), Mitsubishi Electric CR750-20HD1-1-S15 industrial robot, SN: F1A508143M, single phase AC200-230V 50/60 Hz, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Hnjdpfox Dw Nhox Aa Eep

Condition: ready for operation (used), Mitsubishi HA100C permanent magnet AC servo motor with Tamagawa Seiki ATT-A-II encoder, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hedpfx Aoi D I I Nsa Eonp

Condition: ready for operation (used), Mitsubishi SJ-9-A spindle motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. NOTE: Please request a separate quote for packaging and shipping costs! Hedpfx Aasi D I Tfj Eenp

Condition: ready for operation (used), Mitsubishi HD100-11SP DC servo motor SN: N77806021 - Terminal box cover missing, used, good condition, 100% functional, scope of delivery as per photos. Hodjw E Uxlepfx Aa Eonp

Condition: ready for operation (used), Mitsubishi Electric RV-7FM-D1-S15 industrial robot SN: FG606002R – minor damage at the air connection, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire about costs for packaging and shipping separately! The following components are also available in our shop: Controller "Mitsubishi CR750-07VD1-1-S15" / Connection cable "BKO-FA0741H05-D" / Connection cable "BKO-FA0739H05-D". Hedpfxjx Dw Nzo Aa Eenp

Condition: used, mileage: 323,000 km, first registration: 07/2015, Year of construction: 2015, Fuso 7C18 refrigerated vehicle with Carrier Supra 750 refrigeration unit, Lamberet box, and LBW • EURO 6 emissions standard • Cruise control • Leaf/leaf suspension • Automatic transmission • ABS • ASR / switchable • Airbag • Air conditioning • Central locking • Double bench seat for passenger (3-seater) • Electric front door • Fog lights • Headlight range adjustment • Rear view camera • Tire size: 205/75 R17.5 • 7,490 kg gross vehicle weight • Unladen weight: 5,200 kg • Payload: 2,300 kg! LAMBERET refrigerated box: • 12 pallet spaces • 3-part soft wall; longitudinally movable • Cold curtain • Portal doors at the rear • Right side door • Aluminum stop strips on the right. Bottom left and right • 2-way lashing rails right and left • Floor: aluminum checker plate • Dhollandia DLHM 10 tail lift, vertical CARRIER Supra 750 refrigeration unit: • Diesel / electric (380 V) • Remote control in the cab • Temperature recorder • !! Engine completely overhauled in our master workshop, 0 km! • !! Clutch new! - German vehicle - 1st owner! - TÜV / HU on request and for an additional charge: new! Hsdpswmn Susfx Aa Esnp Subject to errors and prior sale!

Condition: used, Year of construction: 2012, operating hours: 554 h, functionality: fully functional, Mitsubishi FB16CPN Electric Forklift truck. In very good condition and working order. Year 2012 1 pervious owner from new! Have original purchase receipt of £20k plus. Truck is registered With the UK DVLA to be able to drive truck on the road. Digital Display allows you to see what speed you are doing and also displays the weight you are lifting. Comes complete with Single Phase Battery charger, Spare keys and Handbook. See last photo of trucks Features. Collection and inspection is Tadley UK (Near Reading) Specification: Mitsubishi FB16CPN Electric Folklift truck Capacity: Nominal 1600kg at 500mm Load centre With sideshift: 1600kg at 500mm Load centre at full height With sideshift: 1425kg at 600mm Load centre at full height Hedpfx Aox Nbn Ija Ejnp Mast: Simplex 2 stage clear view Lift height: 3290mm Closed height: 2125mm Tyres: Solid Pneumatic profile Folks: 1000mm Long Single phase battery charger

Condition: good (used), Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Voltage: see nameplate -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm Hnedpfx Aaod Tgaps Esp -Design: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

Condition: good (used), Year of construction: 2006, operating hours: 2,322 h, load capacity: 1,600 kg, lifting height: 3,295 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, empty load weight: 3,000 kg, mileage: 2,322 km, Electric duplex forkliftBrand: MitsubishiYear of manufacture: 2006Capacity: 1,600 kgLift height: 3,295 mmOverall height: 2,100 mmCONTAINER forkliftHours: 2,332 hoursEquipped with FREELIFTEquipped with SIDESHIFTBattery from 2006With external chargerAutomatic filling systemWatch the video on YouTube Hedpfoyyphkjx Aa Ejnp

Condition: ready for operation (used), Mitsubishi HA80C-SS servo motor, serial number: 53031 + OSE 5KN-6-12-108 encoder, serial number: 66319S, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hedpfxoi D I Rys Aa Eonp

Condition: ready for operation (used), Mitsubishi HA23NC-S servo motor, serial number: 14004 + OSA253S2 encoder, serial number: J4AVU426G7V, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Hedoi D I Nuepfx Aa Eenp

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor, serial number: M54644060 + Tamagawa OSE 12.5KN-6-12-0 rotary encoder, serial number: 7945T, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Hodpfx Aaei D I N Us Eonp

Condition: ready for operation (used), Mitsubishi HA33NS-E33 servo motor, serial number: JEA129W3D52 + OSE253S encoder, serial number: J4AVQ16328D, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hnsdpfxsi D I Rks Aa Esp