Used Mazak Qt 8 for sale (319)

Condition: good (used), Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, number of slots in tool magazine: 60, Equipment: documentation/manual, 5-axis machining center MAZAK VARIAXIS I 500 with pallet changer Year: 2006 Numerical control: Mazatrol Matrix Controlled axes: 5 continuous axes X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 460 mm A-axis: -120° / +30° C-axis: 360° Table size: 500 x 400 mm x 2 Maximum load on the table: 300 kg Bjdpfezz R Acjx Amrswu Distance from spindle nose to horizontal table: 190 - 650 mm Distance from spindle nose to vertical table: 140 - 600 mm Maximum spindle speed: 12,000 rpm Spindle power: 22 kW Tool magazine capacity (automatic tool changer): 60 Chip conveyor

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Bwsdpjvlxf Dsfx Amreu Max. Machining diameter: 540 mm Max. Machining length: 1018 mm Spindlebore: 51 mm Spindlepower: 22 kW 5000 rpm Travel: X = 530 mm Z = 1065 mm Machine weight: 7800 kg. Machine dimensions: L=5200 x W=2500 x H=2750 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Bwsdowqr Tdopfx Amrju Meter reading 48651 hours Operating system Fanuc L-64

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle Bjdpfx Aozr Uudomrewu - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Bwsdpfx Ameu U R E Asrsu

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: MATRIX 2, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information. Additional equipment • workpiece and tool probe • mist extraction • oil separator Machine Benefits Technical Machine Benefits • Cooling through spindle pressure: 15 bar • Number of pallets: 2 • The machine is in very good technical condition. Extra Information Bwsdpfxozvv Akj Amrou Machine still under power Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Bwsdpfozqt Umjx Amreu Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Bsdpfx Aszf Hyrjmrjwu Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Makatrol Smart Control Bwodpfezilpmsx Amrsu Serial Number 254702 YOM 2014 EIA & Mazatrol Programming Full Factory 4th Axis 30 Tool Magazine CAT Tooling USB Ports No swarf conveyor or thru coolant UK Buyers - Price £39,000 +VAT Carriage/delivery is additional

Condition: ready for operation (used), Mazak Mazatrol Cam M-2 Control Panel YM2B BN110B367, used, shows significant signs of wear, 100% functional, scope of supply as shown in the photos. Bwjdpfoi Eb Dkjx Amreu

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data Bodpfx Amozq Hwnjrjwu X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: MAZATROL, controller model: 640 M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VTC 300C II was manufactured in 2012. It features a spindle speed of 12,000 RPM and a tool capacity of 30 tools in the automatic tool changer. The machine has a generous travel of 1740 mm in the X-axis, 760 mm in the Y-axis, and 660 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 300C II vertical machining centre we have for sale. Contact us for further details. • Tool setter • 30 tools in ATC Bjdpeztdziofx Amrowu Technical Specification Taper Size SK 40

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bjdpji Eb Dnjfx Amrowu

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwsdsi Eb Drepfx Amreu

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) Bodex Adn Uepfx Amrjwu CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: used, Year of construction: 2008, Mazatrol Matrix CAM PC workstation with full-featured 5-axis license (incl. PCI card & PC) Description: A complete, ready-to-use PC workstation with the powerful Mazatrol Matrix CAM software is for sale. The license is perpetual and hardware-bound via a PCI card. The system was used on 5-axis machines (Integrex e-1060 V8/II) and includes rare high-end options. The PC has been recently reinstalled and is fully functional. Ideal for companies with an older Mazak machine park looking for an independent programming solution. Bedpox Sq Nmofx Amrowu Details on license & options: The following key options are unlocked and active (see photos): - 40 SIMULTANEOUS 5 AXIS (simultaneous 5-axis machining) - 49 TILTED WORKING PLANE - 55 TOOL CENTER POINT CONTROL Additional basic options such as EIA, Smoothing Control, Spiral, etc. (see photo of the options menu) Scope of delivery: - PC system: Windows 7 Pro x86 (32 Bit), Intel i5-3470 3.2 GHz, 4 GB RAM, AMD Radeon HD7570 GPU. - The fully functional computer with installed operating system (Windows 7 Pro_x86) and pre-installed software. - PCI license card: The physical license hardware installed in the PC. - Original packaging: The original packaging of the software as shown. Documentation: Manual, original CDs/media

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Bodpfxezuy Tde Amrowu Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: used, Year of construction: 2006, functionality: fully functional, Machine dimensions: 2.9m x 2.8m x 2.9m Machine weight: approx. 7 tons Year of manufacture: 2006 Travel ranges: X 1050 Y 530 Z 510 (150 above table) Spindle speed: max. 12,000 rpm Motor spindle: SK40 Measuring probe: Renishaw OMP 60 Measuring head: Mazak Internal cooling pressure: 25 bar External cooling Bjdpfx Asy Tlu Tjmrowu Tool magazine: 30 positions Articulated belt conveyor Machine control: MAZATROL M640 • One machine each in left-hand and right-hand configuration (chip conveyor on the left or right) • Various tool holders can be purchased separately. • NO clamping devices (vices) included! • NO dust extraction system The stated price is for one machine only.

Condition: used, Year of construction: 2011, Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Maximum detail size: Ø 800 x 1000 mm Max load capacity: 700 kg Spindle speed: 12 000 r/min - High-torque Spindle effect: 22/30 kW , 300 Nm (AC40HP) CAT 40 Tool changer: 40 positions Interface for coolant system Prepare for probe OMP60 Cromar conveyor Synchronised tapping G00 slope constant EIA EIA 3D COMP Scaling included loading of machine Bwodpey H Dnxsfx Amreu included tools and cubes Mazak HC Nexus 5000-II: LxWxH: 475 x 238 x 285 cm Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Max load capacity: 700 kg Tool changer: 40 positions

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total width: 2,100 mm, overall weight: 9,200 kg, product length (max.): 3,850 mm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details. - Maximum Turning Diameter: 540-660 mm- Maximum Swing Diameter Over Bed: 660 mm- Maximum Turning Length: 1016-1045 mm- Main Spindle Speed: 35-5000 rpm- Milling Spindle Speed: up to 12000 rpm- Tool Holder: Capto C6- Machine Height: 2597 mm- Main Circuit Voltage: 3AC 400V 50/60Hz- Control Circuit Voltage: AC 100V / DC 24V- Main Motor Current: Max 84 A (400 V)- Rated Capacity: 50.0 kVA- Oil Cooling Unit Model: Daikin (Weight 190 kg)- Cooling Unit Capacity: Comp. 1.1 kW, Circulating Pump P1 0.4 kW, Circulating Pump P2 0.4 kW- Refrigerant: R407C (0.83 kg) Bodpfx Amszwx Acorowu

Condition: used, Year of construction: 2005, Mazak VC Nexus 510C Mazatrol 640M Nexus Year of manufacture: 2005 Table: 1300 x 550 mm X: 1050 mm Y: 510 mm Z: 510 mm 12,000 RPM/18.5 kW spindle: ISO-40 ATC: 30 positions Bwjdjzw Amrepfx Amrju tool measure, CTS 15 bar Performance CNC optional package

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine is being sold due to factory closure. Includes a bar loader. Bsdpfx Aozx Hv Hemrowu

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, total height: 2,813 mm, total width: 2,623 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,430 kg, spindle speed (max.): 18,000 rpm, tool weight: 12,000 g, product length (max.): 5,769 mm, number of axes: 4, This 4-axis Mazak HCN-5000 was manufactured in 2024. It features an X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 800 mm. The machine has a maximum workpiece weight of 700 kg and a spindle speed of 18,000 RPM. If you are looking to get high-quality machining capabilities, consider the Mazak HCN-5000 horizontal machining centre we have for sale. Contact us for further details. • Quantity/configuration: 5 machines total; identical configuration except tool changer capacity: Bwodpfxozw Dtao Amrsu • 3 machines with 40 tools • 1 machine with 60 tools • 1 machine with 80 tools • Control unit: Smooth G • Pallet size: 500 x 500 mm • Max. workpiece dimensions (L x W x H): D. 800 x 1000 mm • Table surface: Tapped holes • Max. workpiece weight: 700 kg • Rapid traverse (X/Y/Z): 60,000 mm/min • Max. tool diameter: D. 95 mm / D. 170 mm • Max. tool length: 170 mm • Tool selection method: Fixed • Tool change time: 2.8 s • Coolant pressure: 15 bar • Coolant tank capacity: 500 L Additional equipment • Tsubakimoto Mayfran ConSep 2000 chip conveyor/separator • Butti chip container • Mist collector line setup Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes Bjdpfszr U Auox Amrjwu

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, overall weight: 4,380 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QuickTurn Nexus 200 CNC lathe features an 80 mm spindle bore and comes equipped with a bar feeder, collet chuck, and Matrix control. The machine has a weight of 4380 kg and includes tooling. If you are looking to get high-quality turning capabilities, consider the Mazak QuickTurn Nexus 200 machine we have for sale. Contact us for further details. • Spindle bore: 80 mm • Tailstock: Without tailstock Additional equipment • Bar feeder • Collet chuck • Tooling (unspecified) Bsdpjzyub Hjfx Amrewu Technical Specification Counter Spindle No Driven Tools No