Used Mazak Qt 10 for sale (337)

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231575, A highly attractive MAZAK VCN-530C CNC vertical machining centre, manufactured in 2018 and equipped with the advanced MAZATROL SmoothG control system, is available for sale. Technical specifications: - Number of axes: 3 axes - X-axis travel: 1,050 mm - Y-axis travel: 530 mm - Z-axis travel: 510 mm - Table size: 1,300 x 550 mm - Maximum table load: 1,200 kg - Spindle interface: BT 40 / SK 40, depending on configuration - Spindle speed: typically 12,000 rpm - Tool magazine capacity: 30 tools - Maximum tool weight: approx. 8 kg - Maximum tool diameter: approx. 80 mm - Maximum tool length: approx. 350 mm - Rapid traverse (X/Y/Z): 42 m/min - Machine weight: approx. 6,800 kg - Coolant system: - Through-spindle coolant (IKZ) - Chip conveyor - 4th axis / rotary table / KITAGAWA Godpoy N Trxjfx Ankoub The machine can be inspected under power by appointment. Technical data and details are subject to change and prior sale.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Gsdoyyybhopfx Anksub Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Gsdpfxsx S Hm Ie Ankeub Weight: 14000kg

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Gujdpfx Ajw Rm Dienkjb Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Godjwpufgjpfx Ankoub Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2016, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Make: MAZAK Type: Integrex i-200ST x 1500U Control: Smooth Mazatrol Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Gusdpfoyrcxljx Anksb Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Gedpfx Asvgcpvonkeub Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9485 Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Gujdpfsyyygwsx Anksb Only 250 Spindle Hours ATC 48 Position Lehmann EA-520 R-Mi4 4e axis integrated Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe Optional tooling packge Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Guodpfx Anoyyxzmskob Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis Gsdpeyz Stlefx Anksub MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Mazak, controller model: Mazatrol M640, workpiece length (max.): 2,820 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 800 kg, table width: 510 mm, table length: 1,460 mm, overall weight: 6,100 kg, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 110 mm, tool weight: 18,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Mazak VTC 200B in very good condition for sale. The machine is fully operational and can be inspected under power at any time. TECHNICAL SPECIFICATIONS: Work Table: Table size 510 x 1,460 mm Max. table load: 800 kg Travel distances: X-axis 1,120 mm, Y-axis 510 mm, Z-axis 510 mm Rapid traverse speed: X/Y/Z-axis 30 m/min Feed rate: 1 - 8,000 mm/min Distance spindle nose to table: 180~690 mm Working spindle: Speed range 40 - 10,000 rpm Tool holder: CAT 40 Main drive power: 15 kW Max. torque: 98 Nm Tool magazine: Number of tool stations 30 Guedpoy Rarnsfx Anksb Max. tool diameter: 80 mm (110 mm with adjacent station empty) Max. tool length: 350 mm Max. tool weight: 8 kg Machine data (standard configuration): Total connected load: 22.7 kVA Machine weight, approx. 6,000 kg Machine dimensions (L x W x H), approx. 3.00 x 2.90 x 2.80 m

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Guodpfoy Shk Uex Ankjb Please Note: Erowa Machining Fixture Not Included Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2016, condition: used, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 268148 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included. Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Godpfxjy Shkno Ankeub

Condition: used, Year of construction: 2016, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 276585 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Gujdpoy Shiwjfx Ankjb Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2022, Mazak VTC 820/20 CNC Vertical Machining Centre with Mazatrol Smooth G Touch Screen CNC Control. S/No. 323190 (2022), Table Size 2500mm x 820mm, Spindle Speed Max 18,000rpm, CAT40 Spindle Taper, 30 Tool ATC Fitted with Various Tool Holders and Renishaw Probe, Cromar Series IV Swarf Coolant System, CIL 1501 Chiller Unit, Clara 3nine Oil Mist Filter Extractor, Machine Weight 14,000kg. Country of Origin: United Kingdom Guedpey Shhyefx Ankeb Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Condition: used, Year of construction: 2005, Mazak Variaxis 730-5X CNC Vertical Machining Centre. S/No. 567181684 (2005). Country of Origin: Japan Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Godoy Sha Aepfx Ankoub

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, overall weight: 36,000 kg, controller model: M-Plus, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus Guodpoy N A Eusfx Ankjb If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre Gsdpfx Aney N Azvjkoub CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece weight (max.): 700 kg, controller manufacturer: Mazatrol, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, overall weight: 11,000 kg, table length: 500 mm, table width: 500 mm, controller model: Matrix Nexus, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre Guedpfxjy N Adds Ankob CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper DIN 69871A-40 Spindle speed 18.000 1/Min Spindle motor 35-26 kW Magazin capacity 80 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, overall weight: 8,900 kg, table length: 550 mm, table width: 1,300 mm, controller model: 640 M, spindle speed (max.): 6,000 rpm, spindle speed (min.): 25 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Gujdpey Nz Etefx Ankeb Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, total height: 3,050 mm, total length: 7,805 mm, total width: 7,109 mm, overall weight: 11,600 kg, table length: 500 mm, table width: 500 mm, controller model: Fusion 640 M, spindle speed (max.): 12,000 rpm, tool weight: 700 g, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg Movement X-axis 730 mm Movement Y-axis 730 mm Movement Z-axis 740 mm Table indexing 360 x1 ° Spindle Taper CAT 40 Spindle 12.000 1/min Spindle motor 22/15 kW Magazin capacity 80 Required floor space 9850 x 10145 mm Guedsy Nzraspfx Anksb If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Gedoy Nytpopfx Anksub Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2003, X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feed: 30 000 mm/min Feed rate: 8 000 mm/min Speed range: 40 - 12 000 rpm Table : 2 000 x 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot distance: 100 mm Max. table load: 1 000 kg Spindle distance to table: 180 - 690 mm Spindle center to stand: 530 mm Table height: 750 mm X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feeding: 30 000 mm/min Feeding: 8 000 mm/min Number of T-slots: 5 Guodpjy Nlv Njfx Anksb T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. board load: 1 000 kg Distance from spindle to table: 180 - 690 mm Spindle distance to table: 180 - 690 mm Fast feed: 30 000 mm/min Spindle center to stand: 530 mm Feed rate: 8 000 mm/min T-slot distance: 100 mm Max. table load: 1 000 kg Table height: 750 mm

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Gedsv Tvivjpfx Ankjub Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: ready for operation (used), Year of construction: 2007, A Mazak CNC 5-axis machining center with a dual pallet changer is available. Spindle power: 22kW, speed: 10000rpm, rapid traverse: 42m/min, tool positions: 80, tool holder: SK50, coolant pressure: 70bar, control system: Mazatrol Matrix. Including CNC option package Performance, preparation for Monitoring System B, Mayfran Consep 2000 chip conveyor and tool length measuring device. Documentation available. An on-site inspection is possible. Guodoy R Dt Aopfx Ankob