Used Marking Devices for sale (15,758)

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 220 mm -Rollers: Ø 185 x 117 mm -Load capacity: kg Knedpfszbrqpjx Ahgeb -Dimensions each: 1070/200/H240 mm -Submission/Price: complete -Transport dimensions: 1070/410/H240 mm -Weight: 265 kg

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system Kedpezg Er Asfx Ahgonb WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Digital display unit PB541 PROFIBUS connection with a pre-selection switch Manufacturer: Motrona Kedpfozg If Sox Ahgenb

Condition: used, Available quantity: 4 units “Removed from a production facility of an automotive supplier, professionally dismantled” Designation: DC high-voltage/insulation test module GH-200.11A Manufacturer: STAHL Prüftechnik Application: Checking and determining voltage and insulation strength Technical data: - Test voltage (setpoint specification): 100 ... 7500 V DC - Control deviation/measurement accuracy: 0.1 % ± 2 V of the setpoint - Rise rate (ramp): 50 V/s - 30 kV/s - Discharge internal resistance: 100 MΩ - Measurement range: 0 ... 7500 V DC - Output isolation: ± 1500 V max. voltage difference between HV 0 output and PE connection - Trigger current: 1 µA ... 10 mA - Measurement ranges: - Range 1: 0 ... 10 mA - Range 2: 0 ... 200 µA - Resolution: 1 nA - Measurement uncertainty: - Range 1 (10 µA to 10 mA): < 0.5 % of the measured value ± 0.5 µA - Range 2 (0.5 µA to 200 µA): < 1.0 % of the measured value ± 0.01 µA - Discharge energy: < 350 mJ Interfaces: - Ethernet (Modbus protocol) - Optional: Profinet, EtherCAT - Optional: 2-channel safety circuit Special features: Knodpozg Ihgefx Ahgjb - Safety current limited to 10 mA - Precise insulation measurements in the GΩ range through guard connection - Compact industrial design for installation in automated testing applications - Voltage supply with wide-range input

Condition: good (used), functionality: fully functional, The hot runner system DPK 15 from Günther is for sale. The system has been checked for functionality by the manufacturer. The following inspections were carried out: Visual inspection, inside and outside Update from V1.56 to V1.6.7 Temperature calibration Testing according to DIN VDE 0701 Both cables, STL/0/15 and TVK/3/15, are in good technical condition and correctly wired. Kedszl R R Ujpfx Ahgenb

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Kodpfoziwwijx Ahgjnb Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: used, Quantity: More than 10 available Kedpfszi Dx Hsx Ahgonb Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI16/8 7/8" IRT Article number: 5556 Device type: Safety device / safety module Communication: PROFINET IO IRT-capable: Yes Digital inputs: 16 safe inputs / 8 channels Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting

Condition: like new (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 67 mm, total width: 800 mm, total length: 12,740 mm, conveying length: 12,740 mm, construction width: 800 mm, Technical specifications: Conveyor width (FB) in mm: 600 Overall width (GB) in mm: 800 Conveyor length (FL) in mm: min: 5,130, max: 12,740 Support structure: with swivel castors Knodpfx Aozibrdshgjb Consisting of: 1x conveyor belt with head drive, including side guide 80 / L: 2,200 mm, FB: 600 mm 1x roller conveyor 24V, including side guide / L: 2,040 mm, FB: 600 mm, RT: 50 mm 1x light-duty roller conveyor / L: 8,500 mm, FB: 600 mm, RT: 67.5 mm

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity: 5 available Knodpjzh A D Eefx Ahgsb Manufacturer: Stahl Prüftechnik Type: FR-110.01A Function: Testing device for functional and process monitoring in industrial applications Power supply: 230 V AC Display: LED / Digital display Housing: Metal Application: Quality assurance, leak testing, process control

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Knjdpfx Aezh Ht Rehgob Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Kodpfx Ahozf D Rnjgonb Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Interface Connections Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), Weiss Umwelttechnik GmbH Salt spray chamber / corrosion test chamber Used salt spray chamber Weiss SC/KWT 450 for corrosion, salt spray, and condensation water tests according to common industry standards. The system is suitable for material testing, coating testing, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Knodpfx Ahozd Axbsgsb Salt spray test up to +50 °C Condensation water test up to +45 °C Humidifier up to +75 °C Power connection: 230 V / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment: Control unit Test chamber with sample holders Brine supply system Documentation / Service manual Accessories as shown in the pictures Scope of delivery Salt spray chamber Weiss SC/KWT 450 Documentation Accessories as shown in the pictures Condition Used, optical condition as shown in the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Ksdszgd Enspfx Ahgonb Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains - fully automated with amrys - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc.

Condition: used, functionality: fully functional, Functionally tested; item originates from the dismantling of equipment from an automotive supplier. Knsdpfxszgf Hms Ahgsb Manufacturer: Linde Type: LSG-4 Smart Device type: Signal device for forklifts Function: Acoustic and optical warning signals during vehicle operation Power supply: 24 V DC Application: Safety warning system for forklifts and logistics vehicles Mounting type: Vehicle mounting

Condition: good (used), Here we offer a Bosch Sigpack Systems unit with a Manz Aico pendant hand programming device. Bosch Sigpack Systems with Manz Aico pendant hand programming device Bosch Sigpack Systems XR31-3 with Manz Aico pendant P51 hand programming device 80017134 Bosch Sigpack Systems Type: XR31-3 Manz hand programming device Type: 80017134 Knedpfozdrzrox Ahgsb Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: excellent (used), Here we offer a fastening system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Knsdpfx Ajzgabfohgjb Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: used, height 2400 mm width 750 mm depth 1000 mm thread M 20 There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Knjdey Swg Eopfx Ahgjb About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, height 1600 mm width 600 mm depth 750 mm thread M 20 There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Knsdpfey Swh Asx Ahgob We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2025, condition: new, The Unstacker Fully automatic destacker Designed for sawing 2-edged and 4-edged cant Knedpehbr Ufjfx Ahgjb Productivity - 120 m3 per shift (10 hours)

Condition: used, Quick release device, quick release, quick release vice, drilling device, machine vise, drill vise, clamping sleeve, collet, clamping device -Manufacturer: VEB, clamping device type TGL30-10206 -Size: 100 x 60 mm -Clamping height: max. 70 mm -Dimensions: 180/160 / H135 mm -Weight: 7.2 kg Knsdpfsg D Rmxsx Ahgsb

Condition: new, Year of construction: 2025, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk Knedsg H Tn Iepfx Ahgjb - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2007, condition: excellent (used), Approx. 11,000 push-through guards for SSI Schäfer R 3000, for a field width of 1.28 m – used: Price per unit: €2.00 (net)! Minimum order quantity: 200 units! Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: 2007 For field widths of 1.28 m Kedeg Rmf Eepfx Ahgsnb Condition: good Available: immediately Location: Frankenberg warehouse

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Kedpofz D Etefx Ahgenb Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! Knodpjfz D E Nsfx Ahgsb =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 1997, condition: used, Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V Kodpfx Ajgxcuxohgjnb -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm -Weight: 24 kg