Used Machine Spirit Level Accuracy for sale (68,929)

Condition: used, Year of construction: 2002, travel distance X-axis: 7,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, Travelling column milling machine Manufacturer: ANAYAK Type: HVM 8000 Year of manufacture: 2002 Control: Heidenhain Technical details: X-travel: 7,300 mm Codpfxoz Ic Ale Aiijri Y-travel: 1,500 mm Z-travel: 2,000 mm Spindle speed: 4,000 rpm Tool taper: SK 50 Number of tool stations: 40 positions Condition: Used Available: from March 2027 The machine is under power and can be demonstrated. Technical features & accessories: - Control cabinet newly rewired - Orthogonal indexing milling head, 1° + 2.5° - Chip conveyor - Coolant system - Floor plates Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 Crodeyk Dicjpfx Aiiji stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backgauge, 2000 mm - Hydraulic upper jaw adjustment - Motorized lower jaw adjustment - Hydraulic tool clamping - Side guards - Foot switch - Operating instructions

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 Cjdpfxezaf Huj Aiisri 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U | C40U | C-40U | C-40 U

Condition: used, Year of construction: 2006, travel -x axis 2.000 mm travel -y axis 620 mm travel -z axis 520 mm numbers of positions in the tool changer 56 tool adaptor SK40 5-axis machining center | HEDELIUS - RS60 Magnum KM2000 equipped with shuttle operation, rotating swivel turntable and chip conveyor. Please note that the technical details were added from comparable machines. The machine is in a well-maintained condition. Codpj Ah T U Tofx Aiieri - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS60 KM2000 | RS-60 | RS 60

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Additional equipment: - Swivel axis - rotary table (ø 800) - Blum Tool breakage control / -measurement Cjdpfe Ah Uabjx Aiijri The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: cooling unit, documentation/manual, FANUC Robocut α-C400iB 31i WB HMI Complete with RENISHAW part probe Hammer for removing swarf Spatula for collecting swarf Robot interface for unattended machining Door with automatic (opening) descent • CNC Fanuc 31i-WB • Z-axis controlled by CNC • Wire driving unit with automatic threading AWF2 • 15” ‘touch screen’ display and portable keyboard • Automatic water level adjustment • Dielectric fluid filtration system • Fanuc cooling unit • Three-phase 380/220V 15 kVA transformer MANUALS TECHNICAL SPECIFICATIONS: Maximum workpiece size (mm)……………..……………730 x 630 x 250 Maximum workpiece weight (kg) ……………..………….500 Travel of X and Y axes (mm) ……………..……400x 300 Travel of Z axis (mm) ……………...…255 Travel of U and V axes (mm)…………….. ………..120 x 120 Maximum taper angle (°/mm)……………. 30°/80 Minimum incremental step of drives (mm)……………..……………..…0.0001 Wire diameter (mm)…………….……0.10/0.30 Maximum wire weight (kg)…………….……………..……………..……..16 Footprint (W/D) (mm)…………….……………..1930 x 2330 Machine weight (approx.) (kg)…………….…………….1800 Control…………….……………..FANUC 31i-WB Program memory size (MB)…………….……………...4 Generator AC ……………..standard Pulse generator ……………fully transistorized Maximum cutting speed …………….330 mm2/min (brass wire Ø 0.3 mm) Minimum surface roughness …………….Standard 0.3 Ra (OPTIONAL 0.1 RA for superfine finishing) Dielectric system ……………..……………Deionized water Tank capacity (liters)…………….……………..……………520 Filters ……………2 paper filters Machine weight …………….1800 kg FANUC Robocut α-CiB Series 31i WB Machine features High precision: Csdpfx Ais Ah T Rweijri New high-rigidity structure with thermal insulation. Symmetrical pyramid structure with a wide base to eliminate load overhang Lower guide support with thermally isolated arm Tank with hermetic pre-closure device (patented) Servo control of the water level in the working tank (follows the position of the Z-axis) Transparent sealing plate in two partitions for easy inspection and maintenance Economic efficiency: Long service life of wear parts Low operating costs Minimum footprint for installation Energy consumption monitoring User friendly: Numerical control of the latest generation FANUC 31i WB 15” ‘touch sensor’ LCD screen with Teach pendant USB I/O for data and programs System features to increase machining speed and precision New concept Skim Cutting Power Supply SF2 generator for finishing with Ra 0.3µm on tool steels with a thickness of up to 60 mm Patented AIP2 (artificial intelligence) discharge pulse control High-speed servo control (direct and not through the CNC) Machining of variable thickness shapes optimized thanks to AIP2 pulse control

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 43000 € 821.3 € 2050 mm 10 mm 10 mm 8 mm 10 mm Crjdpfx Asyb S Arsiisi 8 mm 8 mm 6 mm 200 mm 200 mm 180 mm 6 m/min 3850 mm 1350 mm 1290 mm 3750 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € Credpey Dvlkofx Aiioi 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: used, Year of construction: 1970, Tool milling machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, including geometry report Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Travel ranges X/Y/Z 300 / 150 / 340 mm Cedpfx Aiez A Tn Ijijri Spindle stroke 60 mm vertical Tool holder MK 4 Speed range 40 to 2,000 1/min Two-stage motor, gear stages Speed steps 16 speeds Feed 16 steps 10 to 500 mm/min Drive power Two-stage motor approx. 1.0 / 1.4 kW Operating voltage 380 V / 50 Hz Total connected load approx. 1.9 kW Clamping surface 600 x 210 mm Max. table load approx. 150 kg Space requirement (W x H x D) approx. 1,100 x 1,000 x 1,500 mm Weight approx. 750 kg Equipment including: - Vertical milling head - Heidenhain 3-axis digital display - Automatic feed - Coolant system with overhauled pump - Equipment scope as shown in the picture Inquiry item: Transportation costs in an individual offer

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 x-travel: 100 mm y-travel: 160 mm z-travel: 100 mm A-Axis travel: -40 ... +40 ° speeds of tool: 300 - 4000 U/min workpiece turning speeds: U/min Csdpfx Ais Ah Scveiori connected load: 48 kVA dimensions of the machine ca.: 5,3 x 4,2 x 3,4 m weight of the machine ca.: 6,5 t

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, Equipment: auto duplex, brochure finisher, Konica Minolta Accurio Press C 14000, manufactured in 2022, in very good condition, tested and ready to print! Equipment: FS 532 RU 518 m IQ 501 + Video interface VI514 PF 713 PF 811 LS 507 FIERY IC318 NEW ARRIVAL – KONICA MINOLTA ACCURIOPRESS C14000 We are pleased to offer an exceptionally well-equipped Konica Minolta AccurioPress C14000, featuring a powerful Fiery IC-318 print controller and an outstanding range of professional options. This high-end production press offers: • Two high-capacity paper feeders, including one supporting banner printing up to 900 mm. • Paper handling capabilities up to 450 gsm. • An integrated document scanner for convenient scanning and copying operations. • IQ-501 intelligent quality control system for automatic colour calibration, colour consistency and precise front-to-back registration. • A copy count representing less than 20% of the machine's expected lifetime. • LS-507 high-capacity stacker for efficient handling of large print volumes. EXCLUSIVE PROVENANCE AND MAINTENANCE HISTORY This machine comes directly from the French Government and has been maintained exclusively by Konica Minolta France. All the latest available technical upgrades have been carried out, bringing this C14000 up to the same technical specifications and performance level as the newer C14000S. OPTIONAL FINISHING AND AUTOMATION UPGRADES This exceptional production press can be further customized to meet your specific printing and finishing requirements. The following additional options can be supplied upon request: • LS-507 High-Capacity Stacker: An additional stacking unit can be supplied if required, providing increased output capacity for long production runs. • FD-503 Multi-Folding Unit: Professional folding and punching capabilities, including Z-folding, letter folding and two- or four-hole punching. • SD-506 Saddle Stitcher: Professional booklet production with automatic folding, saddle stitching and fore-edge trimming. Codpfx As Ah Tf Ejiisri • AIT – Automatic Inspection Technology for IQ-501: An advanced automated print inspection system that detects image defects during production, helping to identify defective sheets and maintain consistent print quality. Requires the appropriate inspection modules and interfaces. • Automatic Ring Binding System: A professional ring-binding solution can also be supplied upon request, allowing the production of professionally bound documents. Other compatible professional finishing solutions can also be added according to your production requirements. A RARE OPPORTUNITY! As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions, don't hesitate to ask me. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries on request. Please do not hesitate to contact us for further information.

Condition: used, Year of construction: 1998, type of input current: three-phase, pressure: 7 bar, input voltage: 400 V, power: 6 kW (8.16 HP), No. 3290 4-head welding machine Urban AKS 1400/ETS Used, year of construction 1998 Crodpfx Aij Ah Un Nsisi According to our customer / the previous owner, the machine is fully functional and can be inspected on site Vertical 4-head welding machine for PVC window profiles, welding all 4 corners at 90° in one operation Fully automatic cycle with automatic outfeed of the welded frame onto a conveyor Vertical/horizontal tilting unit, can be linked to a corner cleaning machine with turning station Electronic positioning of the X, Y1 and Y2 axes by servo motors (Lenze servo inverters) Urban IPC control with B&R Provit 2500 operator panel Extended working range, welding dimensions max. approx. 3850 x 2220 mm, min. approx. 355 x 320 mm Profile height 50 - 100 mm (clamping height SH 100) Profile width max. 130 mm, 150 mm on table side Weld bead limitation 2 mm Heating plates 200 x 295 x 15 mm with Teflon holder, temperature controller for each heating plate Adjusting plate 190 mm, welding stop 24.0 mm, loading stop 17.8 mm, left-hand stop Power supply 230/400 V / 50 Hz, rated power 6 kW Compressed air 7 bar Profile supports for SL 70 (outer frame, sash) and SL 82 (outer frame, sash, entrance door sash) Various spare parts (Lenze controller, brake, temperature controller) Transport dimensions approx. 5400 x 2400 x 3100 mm LWH Weight approx. 2500 kg Sale on behalf of customer, ex location near 55120 Mainz, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Year of construction: 2017, machine/vehicle number: GA26, Used ROBINO & GALANDRINO RECORD 10000 wirehooder machineTechnical Specifications & Performance DataThe Robino & Galandrino RECORD 10000 is a wirehooder designed for the application of wire cages on bottles used in sparkling wine and champagne-style beverage production. Built in 2017, this industrial packaging machine supports the final closure stage after cork insertion, securing the cork with a correctly applied wire cage.Manufacturer: Robino & GalandrinoModel: RECORD 10000Machine type: WirehooderYear of manufacture: 2017Electrical supply: 400 V, 3-phaseFrequency: 50 HzCurrent marking: 6 AElectrical diagram: REC377Advanced Automation & Control SystemsThis wirehooding machine is configured for industrial bottle handling and cage application. Its three-phase 400 V electrical supply is suited to integration within an automated bottling and industrial packaging environment. The machine can be incorporated into coordinated line controls and bottle conveying systems according to the requirements of the existing production line.Production Line Integration CapabilitiesThe RECORD 10000 wirehooder is intended for installation in sparkling wine bottling operations, typically downstream of corking and upstream of final inspection, labeling or secondary packaging. A machine of this type can operate as part of a used bottling line handling glass bottles, where accurate positioning and tightening of the wire cage are essential for reliable cork retention.Its role in beverage production is particularly relevant for sparkling wine and champagne-style products, where the wirehood provides mechanical security around the cork during storage, transport and distribution. Integration should be coordinated with upstream corking equipment and downstream bottle transfer conveyors.Machine Condition & Maintenance HistoryThis second hand Robino & Galandrino wirehooder was manufactured in 2017. Its data plate identifies the machine as RECORD 10000 and provides the electrical supply details required for preliminary technical evaluation. Inspection of mechanical assemblies, wire cage feeding components, bottle guides, electrical equipment and safety devices is recommended before commissioning in a bottling equipment installation.Operational Performance & VersatilityWirehooding machinery applies and secures metal wire cages around corked bottles, supporting consistent closure quality for pressure-sensitive sparkling beverage applications. The process helps maintain cork retention and packaging integrity through subsequent labeling, packing, palletizing and distribution stages.For industrial packaging and beverage production, correct synchronization with bottle conveyors and the preceding corking process is important. Format parts and bottle-handling adjustments should be assessed according to the glass bottle dimensions, cork type and wire cage specification used by the intended production line.Installation Requirements & Site PreparationInstallation requires a 400 V, three-phase, 50 Hz electrical connection. The site should provide... Cedpfxj Aia Els Aiiori

Condition: used, Year of construction: 2017, machine/vehicle number: SO149, Used KOSME KSB 6R rotary blow molding machine 12000 BPH - Year 2017Technical Specifications & Performance DataThis automatic rotary PET bottle blow molding machine is manufactured by KOSME and identified as model KSB 6R. Built in 2017, it is designed for forming PET bottles from preforms in industrial packaging and beverage production environments. The machine has a stated production capacity of up to 12,000 bph and was operated with six-cavity molds for the PCO 1881 neck finish.Manufacturer: KOSMEModel: KSB 6RYear: 2017Production capacity: 12,000 bphContainer material: PETMaximum bottle volume: 3.0LMold configuration: 6 cavitiesPreform neck type: PCO 1881Machine configuration: Automatic rotary blow molding machineAdvanced Automation & Control SystemsThe KOSME KSB 6R is an automatic rotary blower equipped with a preform feeding system. This arrangement supports a continuous supply of preforms to the blow molding process and is suited to integration within an automated PET bottling equipment layout. The rotary configuration is intended to support consistent bottle forming at the stated output rate.Machine-specific electrical data, control hardware and automation component specifications are not included among the available technical details. Installation and commissioning should therefore be planned around verification of the existing electrical interfaces, machine controls and safety circuits.Production Line Integration CapabilitiesDesigned for PET bottle production, this second hand blow molding machine can serve as the bottle-forming stage of a used bottling line. It is suitable for installations where PET containers are produced directly from preforms before downstream rinsing, filling, capping, labeling and secondary packaging operations.The included preform feeding system supports upstream preform handling. A chiller is available with the equipment and can support process cooling requirements. The compressor is not included, so a compatible compressed-air system is required for operation. The machine is configured for bottles up to 3.0L with PCO 1881 neck finish preforms.Machine Condition & Maintenance HistoryThe equipment was removed from operation in January 2026, dismantled and placed in storage. Its current condition is therefore classified as stored equipment. Operating hours are not provided. Buyers planning recommissioning should assess the condition of mechanical assemblies, pneumatic circuits, heating components, electrical systems and safety devices before installation.Operational Performance & VersatilityThis KOSME PET blow molding machine is intended for producing PET bottles used in beverage production and industrial packaging operations. Its six-cavity mold arrangement supported output of up to 12,000 bottles per hour. The documented configuration used PCO 1881 preforms, providing a defined neck-finish platform for compatible bottle and closure programs.Molds are excluded from the offer. Bottle design, final format and product application therefore depend on the... Cjdo Aia Ewjpfx Aiijri

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Cjdpsz Iyvpefx Aiiori

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Crjdpsxy Tm Ijfx Aiioi

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Csdpoxy Tmnefx Aiiori

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 Cjdpegydn Ijfx Aiisri SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL Credpexyfmgefx Aiiji - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Year of construction: 2012, condition: excellent (used), Now available: Crodehx Rkcopfx Aiiei Mueller Apparatebau 6612 cutting system with complete pile stacking line This machine is equipped wih following for processing continues feed, cutting and stacking - unwinder - Mueller apparatebau merger - Mueller apparatebau cutting system - Mueller apparatebau automatic collating table - Mueller apparatebau output belt Now available for a very good price!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS Ceds Ahm Eyspfx Aiieri CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Codpfxowiatie Aiisri Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet - coolant device - 3 grinding wheels, some flanges Technische Daten / technical details: Schleiflänge / grinding length 500 mm Csdpfx Ajwrmcpoiisri Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Credpjwcldajfx Aiisi Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: used, Year of construction: 2000, travel distance X-axis: 4,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 430M, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 600 mm MACHINE DETAILS CNC control: Heidenhain TNC 430M Crodpfx Ae Ah Dryjiiei Tool holder: ISO 40 Tool magazine: 22 tool positions Note: The machine is sold without tools.