Used Lighting for sale (18,166)

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Iedpfx Adoxm Sxvensa Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: ready for operation (used), Year of construction: 2022, Table Table load 12.5 kg Media Chip conveyor Yes Additional Equipment operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Application Types Ijdpexzvuqjfx Adnja Welding

Condition: used, Year of construction: 2008, operating hours: 6,787 h, 2008 | Terex TW110 with two-piece offset boom and 3 buckets | Used Wheeled Excavator | 6787 hours 📍Location: France, Marsac-sur-l'Isle 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 31900 or Make an Offer. Iedpfsxzvpbjx Adnoa Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in working order with the following problems. Hour meter could not be checked. Presence of hydraulic oil in drive, turret and hydraulic pump. Problem using boom slewing cylinder. Slight wear to seat cushion and absence of De La, headrest. Load plate missing. Cab lights not working. Slight impact to right front rim. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "36478 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Isdoxzuiaepfx Adnoa

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Total weight: 10,000 kg Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Ijdpfx Asxzt R Nsdnja Lighting connection power: 18 W

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: E61SI19012720674, This is a Rational SCC 61 WE Electric Combi Steamer from the premium manufacturer Rational. This combi steamer accommodates 6 x 1/1 GN containers. In automatic mode, the unit independently detects the optimal cooking path, the size of the food, the load quantity, and the specific product requirements for seven applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). The unit has undergone a new inspection by our in-house specialist workshop and is fully functional, with a 6-month warranty. The base shown in the photos is not included in the offer but can be purchased separately upon request. You will receive an invoice showing VAT. Please note: The photos are sample images; original pictures will follow shortly. Technical data: Dimensions (W x D x H): approx. 847 x 776 x 782 mm Power supply: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6 x 1/1 GN Weight: approx. 110 kg Serial number: E61SI19012720674 Year of manufacture: 2019 Condition: Used, inspected, fully functional Service: We are happy to arrange a certified Rational service partner for you throughout Germany. Looking for a specific Rational model? Please ask—we have access to an extensive range of used and new equipment. We are happy to advise you on all types, including SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on all electrical components High-quality branded appliances at fair prices Professional refurbishment/inspection and expert cleaning Tested and fully functional – or your money back Flexible shipping or self-collection options Expert advice – before and after purchase Provision of user manuals, wiring diagrams, and spare parts Safety inspection according to DGUV V3 Further details: Iedpfx Adoxztpljnja Three operating modes in combi-steamer mode: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) Care Control – self-cleaning system Core temperature probe Hand shower with automatic retraction 8.5-inch color display and touchscreen 5 programmable fan speeds Integrated, maintenance-free fat separation system Automatic pre-set start time 7 cleaning levels for unattended cleaning – even overnight Steam saturation adjustable in 3 levels – from 30°C to 260°C 5 programmable proofing stages USB interface Seamless, hygienic cooking chamber with rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior arrangement

Condition: excellent (used), Year of construction: 2014, Traverses X Y Z: 1016 x 660 x 635mm, Ijdpop H Tb Nofx Adnea Spindle nose to Table: 102 – 737mm, Table 1372 x 635mm, Spindle speed 12000rpm, Spindle Taper ISO40, Spindle Motor 22.4kW, HAAS Control with High Speed Machining, 24 Station ATC, Programmable Coolant nozzle, Low Volt light, Swarf auger, Renishaw Tool Setter & Probe

Year of construction: 2015, operating hours: 12,244 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D-SolutionLine General Data Measurements width 1440 Measurements depth 2730 x x Measurements height 1620 mm Machine weight 4200 kg Main Drive Spindle speed range 4500 Spindle motor power 11 kW/ 16.5 kW Number of axis 2 Movement X-Axis Movement 230 mm X-Axis Rapid Traverse 15 m/min Z-Axis Movement 740 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm over bed 425 mm Turret Number of turrets 1 Tool taper DIN 69880/30 mm Tail Stock Pinol diameter 80 mm Tools Ijdpexn Dm Ujfx Adnoa Number of station 12 Media Oil tank 30 liters Additional Equipment Full splash guard cladding + coolant unit Work area light + pneumatic equipment Panoramic window for optimum visibility into the work area This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2008, operating hours: 3,520 h, functionality: fully functional, briquette diameter: 65 mm, Equipment: emergency stop, Briquetting Press Höcker Polytechnik - Model Brik Star C11-18 - Year of manufacture 11/2008 Iodpfx Aoxztgdsdnja - Throughput capacity 130 - 160 kg/h - Operating hours 3520 - Motor 11 kW - Operating manual - Conical discharge with auger - Additional oil cooler - Light barrier - Test run on site possible upon request

Condition: used, functionality: fully functional, mileage: 429,197 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Iodpexzqdaefx Adnoa Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed

Year of construction: 2019, condition: used, General information Mileage: 77.156 km Field of application: Freight transport Technical information Power: 140 kW (190 HP) Engine capacity: 1.995 cc Type of fuel: Diesel Transmission: Automatic Carrying capacity: 2.420 kg Environment Emission class: Euro 6 Condition General condition: good Technical condition: good Visual appearance: good Other information Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: BMW Model: X3 xDrive20d / emergency vehicle off-road vehicle Year of build: 2019 Condition: Used Data: First registration: 01/2019 Fuel type: Diesel Mileage: 77.156 KM Gear type: Automatic Engine power/displacement: 140KW / 1995cm³ Total permissible weight: 2420 kg Environment badge: Green / Euro 6 Colour: white colour with vehicle wrap Equipment: Automatic front flashers, automatic air-conditioning, seats: 5, airbag, power window and power side-view mirrors, central locking system, ABS, ESC, radio, power steering, fog lights Information: Equipment set-up: LED warning light bar, hands-free system, rear view camera Location: 41468 Neuss Ijdexzq H Ispfx Adnja immediately available

Condition: used, mileage: 140,000 km, Year of construction: 2018, Serial number: WDB9066531P61xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21608 Specifications: 2018 model EU-approved until 23.11.2026 Isdpoxq Dgtefx Adnea Mileage: 140,000 km 163 hp Diesel 4x2 Tires (see pictures) Workbench included, with shelves NOx sensor has been replaced Extra lights DAB/CD Printer drains power Delivery by agreement Description:2018 Mercedes Sprinter 516 CDI van.Workbench included. Owner also has shelves that can be included upon request.Delivery by agreement. Km: 140000 HK: 163 Technical approved: Yes EU-approved until: 23.11.2026 Own weight: 2576 Total Weight: 5000 Payload: 2349 Width: 199,3 Length: 592,6 Euro: 6 Model: sprinter 516 cdi varebil

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light. Isdpsxv Udgjfx Adnja

Condition: used, functionality: fully functional, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment – Immediately Available! Isdpfx Adexzp Udenoa PRICE: €7,500 negotiable SHORT & TO THE POINT: ✅ Office, WC & storage combined in one container ✅ Fully equipped: heating, sink, three-phase power, awning ✅ Immediately available – only 8 units in stock! DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in excellent condition – ideal for use as office containers, site cabins, or storage containers. These containers come from the French CARGLASS fleet and feature high-quality fittings. All technical components are fully functional and ready for immediate use. The condition is guaranteed and confirmed on the invoice. Equipment overview: ✅ Separate WC with washbasin ✅ Office area with plenty of natural light ✅ Kitchenette with sink & water heater ✅ Storage space ✅ Heating & air conditioning unit ✅ Electric awning (3x7 m) with remote control ✅ Three-phase power hookup, electrical installation & external lighting ✅ Ramp & fire extinguisher Special features: ✅ Practical layout: office – WC – storage ✅ Original pictures – condition as shown ✅ Ideal as construction site office, portable office, or mobile service point ✅ Fully functional and ready for immediate use DELIVERY & AVAILABILITY: ✅ Delivery within max. 2 weeks ✅ Delivery cost (excl. unloading): on request ✅ Immediate availability: 8 units ✅ Inspection possible Enquire & reserve now! Additional photos, technical drawings and further details available on request. MAGITU GmbH

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Dowel driving machine with gun for simultaneous gluing and dowel driving. For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth Ijdpfx Aovxgm Nodnsa • Recoil-free, extra-light and comfortable glue-dowel-driving gun • Great time saving compared to glue bottle and hammer

Condition: used, functionality: fully functional, mileage: 417,351 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Iedpfxexzqc Ns Adnja Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed

Condition: excellent (used), mileage: 71 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, color: white, Year of construction: 2024, Field of application: Freight transport Steering wheel placement: Left Engine capacity: 1.968 cc Technical condition: very good Visual appearance: very good Please contact Christian Theißen for more information Manufacturer: MAN Model: TGE 3.180 Year of build: 2024 Condition: New Data: Colour: White Fuel type: Diesel Isdpfx Aexdbtdednea Mileage: 71 KM Gear type: Automatic Engine power/displacement: 130 KW/1968 cm³ Total permissible weight: 3500 kg Environment badge: Grün/ Euro 6 Special features: Daytime running lights, climate control, seating capacity: 8, folding table, airbag, electric windows and side mirrors, central locking, ABS, ESP, radio, power steering Information: Pressure chamber loudspeaker, Martin system, LED signal system, mobile phone hands-free device, work table Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 2004, BOVONE (2004) Lamination Line Comprising: Tilting table, washing unit, positioning table, portal table, film roll storage, folding table, transport table, pre-lamination oven with pressing unit, transport table, and take-off tilting table. Glass thickness: 3–12 mm Maximum assembled panel thickness: 60 mm Minimum panel size with automatic loading and unloading (standard cycle): 400 x 700 mm Minimum panel size without automatic loading and unloading (small parts cycle): 550 x 300 mm Maximum panel size: 2200 x 4500 mm Approximate average assembly time per panel (glass/PVB/glass): 70–100 seconds Worktop height: 950 mm +/- 20 mm Compressed air consumption: minimum 6 bar, 400 l/h Demineralized water consumption (with water recycling system): 0.7 m³/8h Three-phase supply voltage: 400 V +10% Supply frequency: 50 Hz +2% Auxiliary voltage for cabinet lighting: 240 V single-phase Installed electrical power: 265 kW Iodpfx Ajwxxk Ejdnoa Estimated average electrical power consumption: 215 kW Compact installation area (U-shape) Autoclave ITALMATIC available

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1524 x 596 x 584mm, Iedounaawepfx Adnsa Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, 127mm Quill Travel, Interlocked guards, Power Drawbar, low Volt light.

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System Isdevt Ec Sspfx Adnoa - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: used, functionality: fully functional, Used workshop containers are offered from Korbach, Germany. CONTAINER TYPE: Workshop container, office container CONDITION ON DELIVERY: Used EQUIPMENT: - Ramp - Lighting - Electrical installation Ijdoxzp Ukepfx Adnea DIMENSIONS (LxWxH): approx. 5 x 4.05 x 4.20 m Weight: 7,000 kg DELIVERY TIME: approx. 2 weeks lead time TRANSPORT: You can provide us with your postal code so that we can prepare a free and non-binding quotation for containers including delivery and, if required, unloading from the truck. VARIETY: We also offer shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) for every requirement—whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your inquiry! MAGITU GmbH

Condition: good (used), Year of construction: 2020, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, Ijdpfoxy Rt Sex Adnja 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, 3 jaw power chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Ijdstuggcopfx Adnja Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: good (used), Year of construction: 2010, Traverses XYZ: 1020 x 540 x 510mm, Iodpfxsxzt Hws Adnsa table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor, with 4th axis.

Year of construction: 2003, condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Isdpfx Adsk Shihsnsa Coolant, Low Volt light