Used Liebherr Ltm 1160 for sale (238)

Condition: used, functionality: fully functional, power: 72 kW (97.89 HP), overall weight: 10,000 kg, Year of construction: 1999, operating hours: 13,000 h, Liebherr L514 Stereo wheel loader Year of manufacture: 1999 13,000 operating hours 72 kW diesel engine approx. 10,000 kg 20 km/h Gisdpfsw Tlzfjx Ahvjp Fork + bucket Hydraulic quick coupler Transport dimensions: 6.90 x 2.49 x 3.10 m

Condition: used, functionality: fully functional, power: 92 kW (125.09 HP), fuel type: diesel, operation weight: 22,000 kg, Year of construction: 2001, Equipment: air conditioning, Liebherr R904 HDSL Litronic tracked excavator Year of manufacture: 2001 14,000 operating hours 92 kW Liebherr engine Quick coupler Air conditioning Hydraulic narrow bucket Gedpfjxyy Thox Ahveip Undercarriage width: 2.80 m All hydraulic lines present

Condition: used, functionality: fully functional, power: 150 kW (203.94 HP), empty load weight: 36,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Liebherr R934 C HDS Crawler Excavator Gisdpsxq A Dkofx Ahvjp Year of manufacture: 2007 10,000 operating hours Approx. 36,000 kg 150 kW Liebherr engine, 4 cylinders OQ 70/55 SW fully hydraulic quick coupler All hydraulic lines installed Extended monoblock boom Air conditioning Central lubrication system 140 cm digging bucket

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m Gedpfx Ahoyt Rvhsveip for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: used, Year of construction: 2017, LIEBHERR - LS 200F - 2017 - used condition as shown on photos - under power, can be tested MORE SIMILAR LIEBHERR machines: Gsdpfx Aheyt I Afjveip LIEBHERR - LSE 200 - 2017 LIEBHERR - LFS 200 - 2016

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information Giodpfx Ajvl Dl Aehvjp

Condition: used, Year of construction: 2007, Liebherr A924b-957 litronic TIER 3 OVERHAULED Year of manufacture: 2007 Liebherr engine 127kW Tier 3 / EPA 8 solid tyres 10.00-20 Gumasol Dozer blade Industrial mono boom 6.80m Industrial angled stick 5m Operator's cab hydraulically elevating Cabin with front protection grille Radio system Air-suspended driver's seat Positioning swing brake Gsdpfx Ahsyt Idpovjip Lift cylinder damping Lift cylinder with pipe rupture protection Overload warning device Generator drive mounting kit DRIVELINE WARRANTY

Condition: repair required (used), functionality: limited functionality, fuel type: diesel, color: yellow, shovel volume: 4 m³, Year of construction: 2014, operating hours: 11,758 h, Item for sale: LIEBHERR LH 60 machine. Year of manufacture – 2014. Equipment: 12.5 ton hook, 4 cbm grab, 1.2 m boom extension, 0.8 m boom extension. Operating hours – 11,758. Factory purchase – full service history available. Gijdpfx Aeydi Idohvop

Condition: used, Year of construction: 2016, operating hours: 17,628 h, scale; quick-change system Gsdpfev Ilwrjx Ahvsip

Condition: excellent (used), power: 47.5 kW (64.58 HP), operation weight: 6,000 kg, tire size: 405/70R18, tire condition: 80 %, Year of construction: 2023, operating hours: 818 h, Equipment: cabin, LIEBHERR L506 Compact G8.0-D year 2023 hours : 818 hrs. ROPS hydr. quick coupler standard bucket Gsdoygrw Hjpfx Ahvjip pallet forks Mitas tyres 405/70R18 -approx 80% good CE/EPA engine with 47,5 kW operation weight: 6 to.

Condition: used, Year of construction: 2016, operating hours: 5,574 h, Liebherr L556 wheel loader, year of manufacture: 2016, operating hours: 5,574 h, bucket, onboard weighing system with printer, central lubrication system, rear view camera, engine: Liebherr [165 kW / 225 hp], weight: 18,400 kg, immediately operational. We are happy to offer you a leasing or financing solution upon request. Mr. Mihm (phone) will be pleased to assist you. For more information, please visit our website. Subject to errors and prior sale! = Further Information = Giodpfx Aeytmlxohvjp Please contact Tobias Ebert for more details.

Condition: used, Year of construction: 2010, operating hours: 8,000 h, Orderly machine Liebherr L 514 Z Stereo Stereo Loader (articulated steering + rear axle steering – extremely manoeuvrable!!!) Year of manufacture: 2010 Original operating hours: 8000 Chassis number: VATZ 1115CZB025518 Tyres 17.5 x 25 at 40% (with nails + screws – but still airtight!) Gijdpfx Ahoyqn Enevsp Power: 72 kW (98 HP) Total weight: 10,500 kg Air conditioning 3rd hydraulic control circuit for auxiliary equipment such as high-tip bucket, bucket with clamp, silage block cutter, etc. 2 work lights on the cab roof, front Battery isolator switch, comfort driver's seat with suspension Warning beacon at rear of cab (top) Road registration Hydrostatic travel drive with 2 speeds Width: 2400 mm Net price including hydraulic quick coupler and 1.6 cubic metre bucket: €36,500 Additional equipment available at extra cost: 5-ton pallet fork from €2,190 High-tip bucket from €3,250 Volume bucket All prices are net ex stock plus 19% VAT or for export! We are happy to offer transport to your location. Sale exclusively to commercial customers or for export. Sold as seen, in its current condition. No warranty or guarantee. The specified mileage or operating hours are as read from the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided does not represent warranted characteristics. The description and the details provided serve only for general identification of the vehicle and do not constitute a guarantee as defined by sales law. The information does not claim to be complete. The specifications/descriptions and photos are non-binding and do not constitute warranted characteristics. Only the arrangements in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typographical or data transfer errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are also happy to take your vehicle in part exchange. For further questions, please feel free to contact us. For our international customers, we handle all customs and export documents for smooth overseas delivery.

Condition: used, Year of construction: 2006, Wheel Loader Liebherr L 506 Stereo Gisdpfx Ajytl Swshvsp Stereo loader, features both articulated steering and rear axle steering, making it highly maneuverable Year of manufacture: 2006 Quick coupler + folding bucket 3rd hydraulic circuit 2 work lights at the front and 2 at the rear Very nice machine from industrial use, not from a construction site. It was operated in an industrial park as a "caretaker’s machine." Original paint, very clean, and ready for immediate use Loader price: €17,900 + VAT = €21,301 (VAT will be stated) Price with hydraulic quick coupler + folding bucket: €17,900 Available at extra charge: pallet fork Other attachments available upon request All prices are net ex stock plus 19% VAT We are happy to offer transportation to your location. Selling only to businesses or for export. Sale in as-is condition as seen. No warranty or guarantee. Indicated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee their accuracy. Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided does not represent warranted characteristics. The description and information given serve only for general vehicle identification and do not constitute a warranty in the legal sense. The information is not guaranteed to be complete. The information/descriptions and pictures are non-binding and do not constitute guaranteed features. Only the terms stated in the order confirmation and invoice are binding. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Specifications may need to be checked separately if applicable. We are also happy to accept your vehicle in part exchange. For further questions, we are at your disposal. For our international customers, we provide all customs and export documents for a smooth export process.

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Max helical angle 45° Internal and external Head. 44/50 kW. Gijdpfx Ahowdmy Eovjp

Condition: used, Year of construction: 2019, operating hours: 3,229 h, Liebherr L 538 Z 2plus1 Z-lift frame – as new – Regularly serviced by Liebherr. Delivered to customer on 29/03/2019 * 1st service at 485 hours on 30/03/2020 * 2nd service at 928 hours on 08/01/2021 * 3rd service at 1425 hours on 27/08/2021 * 4th service at 2520 hours on 20/03/2023 Chassis No. VATZ1559JZB53233 Year of manufacture: 2019 Operating hours: approx. 3,229 Lift frame with Z-kinematics – earthmoving 4-cylinder inline engine 111 kW/151 HP, water-cooled, turbocharged, emission stage 4 Length 7,200 mm, machine width: 2,500 mm, height: 3,280 mm Hydrostatic drive with 3-speed transmission Special equipment: * Ride vibration damping BSS – lift frame damping * Central lubrication system, Liebherr factory installed * Automatic climate control (maintains set temperature automatically) * Steel lighting bracket instead of plastic * Access aid in front of windscreen for easier cleaning * Premium touchscreen display * Opening window in cab door * "Comfort" driver’s seat with pneumatic suspension, seat heating, and headrest * Adjustable steering column * Comfort radio with hands-free kit * Automatic bucket return * 3rd hydraulic circuit for attachments such as high-tip bucket, sweeper, grapple bucket, etc. * 2 rear LED work lights on cab roof * 4 front LED work lights on cab roof * Engine air intake with pre-separator for preliminary air cleaning * Programmable lift and lowering speed * Tilt cylinder rod protection * Automatic fueling pump with auto shut-off * Road approval Tyres: 20.5 x 25 L3, front axle 2 x 50% * Tyres: 20.5 x 25 L3, rear axle 2 x 50% (The tyres shown in the photos are fitted only for transport) Also available with agricultural tread – see photo no. or earthmover tread – see photo no. * Automatic self-locking differentials, 45% locking value, on both axles Net price with fixed 2.5 m³ bucket: €93,500 net plus VAT Optional equipment at extra cost: * Quick coupler incl. hydraulic preinstallation: €3,550 * High-tip bucket 3–4 m³ * 4-in-1 bucket (grapple/levelling bucket) 2 m³: €3,950 * High-volume bucket 5 m³: €3,990 * Pallet forks, 5 tons from €2,190 (8 ton option available) Available with on-board scale at extra cost: * Pfreundt WK 60: €5,900 Gjdpfxsyrzn Eo Ahvoip Note: The brochure specification only partially matches this machine: – This machine has emission stage IV, brochure shows stage V. All prices are net export – with valid number and papers. Sale only to businesses or for export. Sale in current condition as the machine is. No guarantee or warranty. The stated odometer or operating hours readings are from the respective counter; no guarantee for accuracy. Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided does not constitute guaranteed features. Description and information serve solely for vehicle identification and are not a warranty.

Condition: used, Year of construction: 2020, Equipment: all wheel drive, Liebherr L 538 P 2plus1 Mast: high-lift Year of manufacture: 2020 Operating hours: approx. 13,566 All servicing carried out by Liebherr and documented in the system up to 12,549 hrs as of 16.09.2025. 4-cylinder inline engine, 111 kW / 155 hp, water-cooled with turbocharging, emissions Stage IV Operating weight approx. 14,500 kg | Permissible total weight: 17,000 kg Hydrostatic drive with 3-speed gearbox Rear collision protection (reinforced bumper / heavier counterweight) Automatic central lubrication system, factory-installed by Liebherr Automatic climate control—keeps the set temperature automatically 3rd and 4th hydraulic control circuits for attachments, e.g., high-tip bucket, grapple bucket, etc. Ride control (BSS) — mast damping Access aid in front of windscreen for easier cleaning Lint screen to prevent radiator contamination Wide-mesh radiator core for easier radiator cleaning Reversing fan for cleaning radiators (reverse mode) Air filter with pre-cleaner (TopAIR) for pre-filtering intake air Premium display with touchscreen “Comfort” driver’s seat with pneumatic suspension and seat heating Left armrest Steering column adjustable in height and tilt Comfort radio with hands-free function Steel front headlight carrier instead of plastic 2 LED work lights at rear cab roof 2 LED work lights at front cab roof Sun blinds at front and rear Adaptive work lighting incl. additional headlamp on front frame Mast with end position damping Programmable lift and lower automation Tilt cylinder with piston rod guard Automatic engine shutdown after 5 minutes at idle Defects: reversing camera not working, windscreen cracked Gjdpfx Ajyrznxjhvoip · Speed limit 20 km/h can be adjusted via Liebherr! Tyres: 20.5 x 25 VA (front axle) 2x 30% * 20.5 x 25 HA (rear axle) 2x 30% Automatic self-locking differentials, 45% locking ratio on both axles Price with quick coupler and standard bucket: €59,900 Available at extra cost: High-tip bucket from 3 to 4.5 cubic meters 4-in-1 bucket (grab/levelling bucket) 2 m³ €3,950 Bucket with hydraulic clamp (grapple bucket) €4,350 High-capacity bucket 5 m³ €3,990 Pallet forks 5 tonnes from €2,190 (optionally for 8 t as well) * Also available with on-board weighing system at additional cost: * Pfreundt WK 50 €3,900 * Pfreundt WK 60 * Prices include installation All prices net for export | Domestic sales subject to 19% VAT. We are happy to arrange transport to your location. Sale only to businesses or for export. Sale as-is, in current condition as seen. No warranty or guarantee. The specified mileage or operating hours are as read from the odometer/hour meter, we do not guarantee their accuracy! Subject to prior sale. The vehicle description is non-binding and should not be regarded as a guarantee of specific features. All details are for general identification purposes only and do not constitute a warranty under sales law. Details are not guaranteed to be complete. All data/descriptions and images are non-binding and do not represent warranted characteristics. Only the terms set out in the order confirmation and invoice apply.

Condition: good (used), Year of construction: 1982, max. wheel diameter 1250 mm max. module 16 min. module 1 hob turning speeds 25...250 1/min max. width of spur gears 1000 mm milling slide travel 1000 mm weight of the machine ca. 24,5 t Machine type: L 1202 Largest millable module: 16 / DP 1.5 Smallest millable number of teeth: see group 2.07 Giedpfxsynmptj Ahvop Largest workpiece diameter: 1250 mm / 49.213" Workpiece table diameter: 1100 mm / 43.307" Part diameter: 987 mm / 38.858" Workpiece table bore: 250 mm / 9.843" Workpiece insertion depth: 525 mm / 20.669" Min. cutter position above table: 390 mm / 15.354" Milling carriage travel: 1000 mm / 39.370" Axial feed: min.: 0.1 mm/rev / 0.0039" max.: 10.0 mm/rev / 0.3937" Radial feed adjustable: min.: 0.10 mm/min / 0.0039" max.: 10.00 mm/min / 0.3937" Milling slide rapid traverse: 800 mm/min / 31.496" Main motor rated power: 2.6 ... 16 kW Main motor speed: 300 ... 3000 min?¹ Coolant pump capacity: 200 liters / 52.835 US gal. Max. table load: 8000 kg / 17637 lbm Machine weight: approx. 21,000 kg / approx. 46300 lbm Milling cutter head type: 14.4500

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Gisdex Ezyvopfx Ahvep Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: excellent (used), power: 120 kW (163.15 HP), operation weight: 20,500 kg, tire condition: 35 %, Year of construction: 2016, operating hours: 11,405 h, Equipment: air conditioning, Liebherr A920 Litronic year 2016 operation hours 11.405 hrs ROPS Airco Radio Back drive camera Hyd. 2 piece boom stick 2,60 meter all hydr. lines (hammer-, gripper, scissor-) quick coupler SW48 Likufix Central lubrication Hydr. adjustable bucket – width 2,00 meter tyres: 10.00-20 approx 30-40% good blade support engine with 120kW CE Gisdpjxgtdtjfx Ahvjp Transport : 9.2x2.75x3.35m Operation weight: 20,5 to.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, Liebherr R924 LC Compact Litronic/Hydraulic Excavator Operating Hours: 10,030 h Weight: 26,300 kg Engine Manufacturer: Liebherr (short-tail) Engine Power: 120 kW Air Conditioning Engine Type: D934S Gsdpfx Ahsyrlylsvsip * Sales Consultant Information * + * APPOINTMENT REQUIRED FOR TEST DRIVE OR INSPECTION * + * Trade-in and financing possible. * Input errors cannot be ruled out. * Please verify the equipment on site + input errors + subject to prior sale.

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: Gijdpsw Rf S Eefx Ahvep - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm Gisdpfew Rf R Ujx Ahvjp max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Gsdpfjxylm Hox Ahveip Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Godpfxoym Nfbj Ahvjip Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Giedpfjym Nbcex Ahvjp Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.