Used Liebherr D 904 T for sale (239)

Year of construction: 2009, operating hours: 11,300 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Preperation for grab use and oscillator MAN Engine LD 2842 LE 103 with 670 kW 2x 30To Winches with 36mm ropes Hodpfxoh Ty Aro Ahvjfd 25 to hook Basismast, Mast: 2x 6m + Masthead

Year of construction: 2015, operating hours: 8,100 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine 670 kW Tier 3 2x Winches 300 kN Counter weight 32,5 to Hfjdpeh Ty Ayofx Ahved Additional informations: -Additional reversing camera, winch monitoring -Hammerhead - Liebherr Hydraulic Oil Plus (Longlife & Bio) -LiDAT plus incl. Teleservice - Central lubrication system slewing ring - Electric refueling pump -Air conditioner - Auxiliary heating - Orthopedic driver's seat - Gripper calming winch 3to - preparation until bulkhead plate - Main winch constant pull one winch - Wind synchronization - Litronic SWG control - Auxiliary hydraulics for diaphragm wall grab Leffer - Rope winch - VRM ready - Crawler carrier hydraulic quick couplers

Condition: used, Year of construction: 1994, Wheel loader 541 in very good condition Optically and technically Hsdeufw Apepfx Ahvofd With few operating hours approx. 8700 hours No oil loss Everything works Including transportation throughout Germany Errors excepted Pictures/text may vary

Condition: used, Year of construction: 2024, operating hours: 934 h, 2024 | Liebherr R998 LC-V | Used Demolition Excavator | 934 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 779000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Hfsdpfxjx Rd E So Ahvjd 👷‍♂️ Inspected by an independent expert 68 inspection points 63 approved ✅ 4 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Well-functioning and tidy Liebherr 998, low operating hours, but has already done some work. Slewing brake would need maintenance, braking time is a bit longer. Hydraulic system and pump recently serviced. The left stick cylinder is leaking and the tracks could be tightened a bit. Apart from a few scratches and dents, it's still a tidy excavator. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38272 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 5,405 h, 2018 | Liebherr Pr 746 L | Used Tracked Dozer | 5405 hours 📍Location: France, Moussy-le-Vieux 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Hfodsx N Sw Hjpfx Ahved 💰 Buy Now for EUR 121000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 48 approved ✅ 14 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Machine in good working condition, need some cosmetics work, and to investigate source of oil on the chassis, due to blade being dismantled some test couldn’t be performed. The blade is included with the machine, dismounted for transport. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39783 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, power: 1 kW (1.36 HP), Year of construction: 2017, operating hours: 1 h, Drive: Wheel Empty weight: 12.200 kg Hfjdpfxoyuvd Ts Ahvsd Please contact Emal Jaweed for more information

Condition: used, mileage: 8,168 km, power: 330 kW (448.67 HP), first registration: 06/2021, fuel type: diesel, overall weight: 48,000 kg, axle configuration: > 3 axles, gearing type: automatic, total width: 275 mm, total height: 4,000 mm, Year of construction: 2021, Liebherr MK 88-4.1E Hsdpjyr Uu Sjfx Ahvsfd * Year of manufacture: 2021 * Operating hours: 17 * Mileage: 8,168 km * Max. lifting capacity at maximum outreach: 2,200 kg * Maximum outreach: m (max.) * Maximum lifting capacity: 8,000 kg * Hook height: 59.10 m (jib at steep angle °) * Slewing radius: 3.55 m * Travel motor: 6-cylinder diesel engine * Travel motor/make: Liebherr * Travel motor/power: 3 kW * Number of axles: 4 * Drive/steering: 8 x 6 x 8 * Travel speed: 80.00 km/h * Operating weight: 48.00 t * Additional ballast: 2.0 t Further details and additional images available on request. This description does not constitute a binding offer and may contain errors; no guarantee for the accuracy of all information. Please also visit our website at

Condition: good (used), functionality: fully functional, Year of construction: 2002, operating hours: 14,449 h, machine/vehicle number: 0290, Used CNC gear hobbing machine Manufacturer: Liebherr Hfodpfx Ahjyiyhxevod Model: LC150 Year of manufacture: 2002 Serial No.: 0290 With loading portal

Condition: used, Year of construction: 2015, operating hours: 9,900 h, * Liebherr R 922 LC crawler excavator * Year of manufacture: 2015 * 9900 hours * 22,100 kg * 105 kW Liebherr engine * Oilquick OQ 70/55 fully hydraulic quick coupler * Air conditioning * Central lubrication system * Camera * 3 m transport width Hjdpfx Asyq A Htshvofd * All lines * New service

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm Hfsdpfx Ahjyt Rvheved cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: used, Year of construction: 2017, LIEBHERR - LS 200F - 2017 - used condition as shown on photos - under power, can be tested MORE SIMILAR LIEBHERR machines: Hodpfxsyt I Afs Ahvefd LIEBHERR - LSE 200 - 2017 LIEBHERR - LFS 200 - 2016

Condition: used, Year of construction: 2007, Liebherr A924b-957 litronic TIER 3 OVERHAULED Year of manufacture: 2007 Liebherr engine 127kW Tier 3 / EPA 8 solid tyres 10.00-20 Gumasol Dozer blade Industrial mono boom 6.80m Industrial angled stick 5m Hfodpfx Ahsyt Idpeved Operator's cab hydraulically elevating Cabin with front protection grille Radio system Air-suspended driver's seat Positioning swing brake Lift cylinder damping Lift cylinder with pipe rupture protection Overload warning device Generator drive mounting kit DRIVELINE WARRANTY

Condition: used, Year of construction: 2016, operating hours: 17,628 h, scale; quick-change system Hfedjv Ilwropfx Ahvod

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Hjdpfjwdmy Eox Ahvofd Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: good (used), Year of construction: 1982, max. wheel diameter 1250 mm max. module 16 min. module 1 hob turning speeds 25...250 1/min max. width of spur gears 1000 mm milling slide travel 1000 mm weight of the machine ca. 24,5 t Machine type: L 1202 Largest millable module: 16 / DP 1.5 Smallest millable number of teeth: see group 2.07 Largest workpiece diameter: 1250 mm / 49.213" Workpiece table diameter: 1100 mm / 43.307" Part diameter: 987 mm / 38.858" Workpiece table bore: 250 mm / 9.843" Workpiece insertion depth: 525 mm / 20.669" Min. cutter position above table: 390 mm / 15.354" Milling carriage travel: 1000 mm / 39.370" Axial feed: min.: 0.1 mm/rev / 0.0039" Hfjdpjynmptefx Ahved max.: 10.0 mm/rev / 0.3937" Radial feed adjustable: min.: 0.10 mm/min / 0.0039" max.: 10.00 mm/min / 0.3937" Milling slide rapid traverse: 800 mm/min / 31.496" Main motor rated power: 2.6 ... 16 kW Main motor speed: 300 ... 3000 min?¹ Coolant pump capacity: 200 liters / 52.835 US gal. Max. table load: 8000 kg / 17637 lbm Machine weight: approx. 21,000 kg / approx. 46300 lbm Milling cutter head type: 14.4500

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Hodpfx Ajx Ezyvjhvjfd Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm Hfedpfx Aow Rf S Eshvod gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: Hjdpfxsw Rf R Ue Ahvefd - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: Hfjdpfxoxylm Ho Ahvod - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Hjdpfsym Nfbjx Ahvjfd Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Hfjdpfx Aheym Nbcevjd Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, power: 220 kW (299.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 6,203 h, Equipment: air conditioning, Technical information Track width: 70 cm AdBlue system: Yes Make of engine: D936 A7-24 Empty weight: 41.800 kg Identification Serial number: WLHZ1491CZC046988 Hodpsymv Upjfx Ahvjfd Other information Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,4x3,45x3,3 Production country: FR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information undercarriage renewed at 5560 hours.

Condition: used, power: 150 kW (203.94 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 5,500 h, Equipment: air conditioning, Technical information Track width: 71,1 cm Empty weight: 25.000 kg Drivetrain AdBlue system: Yes Drive: Track Make of engine: D934 A7-04 Functional CE mark: yes Identification Serial number: VAUZ1155CZT015868 Other information EPA Marked: yes Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 7,3x4,03x3,5 Production country: DE Additional information Hfsdpfx Ahjymv Ucevod Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm Hfjdeymf Daspfx Ahvjd clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) * Radio preparation * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Net price with fixed 2.5 cubic meter bucket: €44,900 Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately. Hfodpfxoyqn Hrj Ahvod