Used Laura Pipe Bender for sale (3,283)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Iiodpfszizkyjx Apcjg Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 3232, working width: 1,500 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, For sale is a MicroStep CNC cutting system from the MG series, model MG 6001.15PrkGB+CH500P, manufactured in 2022, with operating hours to be specified. Equipment: - Plasma rotator for weld preparation with Kjellberg Q 3000 plasma power source - Fully automatic oxy-fuel support - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Pipe cutting device RSV 30-300 - Filter system TEKA ZPF 6H with 11 kW Technical data: Working area approx. 6,000 x 1,500 mm + 500 mm shaft Max. traverse height approx. 150 mm Max. table load approx. 100 mm Guideways in the X-direction: Linear guideways with helical rack and pinion Drives: Digital, maintenance-free AC servomotors with IRC Positioning speed up to 40,000 mm/min. Positioning accuracy ≤ 0.06 mm/m Bidirectional repeatability 0.05 mm/m Inspection: An inspection is possible at the location in Wörth a. d. Isar. Isdpoz A Tk Njfx Apceig Interested? The machine is offered in an online auction. Further information and documents are available upon request. Simply contact us!

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges Iijdpfx Aey Sf Azjpcjg • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t Ijdpfjztfxiox Apceig

Condition: new, Year of construction: 2026, functionality: fully functional, pipe diameter (max.): 1,000 mm, A comprehensive range of products: pipes, deflectors, dampers, bends and more at diameters of up to 1000 mm. Iiodpfx Aezxpg Uspcog

Condition: used, Veenstra pipe bending machine. Isdpfx Apszq Amlscjig Size 25 or 32. In good working condition. Used personally for my own work; no longer needed. Includes various sizes.

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. Iisdpfxszmqv Hs Apceg The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state.

Condition: good (used), RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and post-treatment line Iijdpozklb Eefx Apcsg The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to a maximum of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable welded stainless steel construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residues, or vapors from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles using an industrial continuous-feed process. The number "2000" indicates the maximum workpiece length of 2,000 mm that can be processed automatically in the standard configuration. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Ijdjzzpwropfx Apceig Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - Maximum material thickness with a tensile strength of 40 kg/mm²: approx. 3 mm Iisdpfx Ashrm Iuspcjg - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm bending radius min. 90 mm control 3D TubeSoft Slim Iodpsxcuhrofx Apcsig total power requirement 3,5 kW

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm Isdoxcg Evopfx Apcoig angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF 400/4 CATERPILLAR Year of construction: 2003 Isdpewqym Esfx Apcoig Caterpillars: 4 with synchronous drive Diameter: Min 40mm Max 400mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: Ijdozp Ip Ajpfx Apcsig CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven - Crowned rolls - Programmable axis - Designed for highest accuracy - Adjustable crowning of the lower roll - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 110502, input voltage: 230 V, metric thread diameter (max.): 63 mm, metric thread diameter (min.): 16 mm, Albert Roller Threading Machine 380011 Identical to REMS Magnum Compact, high-performance machine for threading, cutting, deburring, nipple cutting, and rolling grooves. For installation work, metalworking, and industrial applications. Pipe threads from 1/2" to 4" Metric threads from 16 mm to 63 mm Includes 1x universal automatic cutting head 1/16" - 2" and 1x universal automatic cutting head 1/2" - 4" each with 6 cutting dies Iijdpfsz Ah R Hjx Apceg The cutting dies (1/2" - 4") are used but in very good condition. The cutting dies (1/16" - 2") have been renewed during inspection. Includes 2 x 5-liter cans of Roller's Rubinol 2000 cutting oil. The machine can be inspected and tested at our location in 09120 Chemnitz.

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972 Iisdjwcqpnepfx Apceg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Machine in good working condition. Ijdpfx Apszutixoceig Capacity: 30 mm steel x 2500 mm.

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, workpiece weight (max.): 10,000 kg, grinding wheel diameter: 400 mm, table diameter: 800 mm, spindle speed (min.): 1,200 rpm, spindle speed (max.): 8,000 rpm, type of input current: three-phase, grinding spindle motor power: 24,000 W, overall weight: 25,000 kg, input frequency: 60 Hz, workpiece spindle speed (max.): 10 rpm, total height: 4,650 mm, total length: 7,100 mm, total width: 8,000 mm, Equipment: documentation/manual, Machine status: 1. Based on the visual inspection, no obvious signs of cracking, deformation, or damage were found on the machine enclosure, working axes, hydraulic system, in-process measuring system, cooling system, filtration unit, or other visible components. 2. The machine can be powered on, and the power supply has been confirmed to be normal. However, the axis parameters and program data have been lost, so it is currently not possible to verify whether the individual axes and overall machine movements are functioning properly. 3. After power-up, the axis positions, coordinates, machining programs, and other related data displayed on the screen all appear as question marks (“?”). The NCU battery and UPS battery were replaced, but the condition remained unchanged. 4. After power-up, a large number of error messages appear on the diagnostic page, including A1-axis encoder errors, input voltage errors, control module errors, cross-error compensation errors, and other related alarms. 5. According to the customer, the handwheel is damaged and needs to be replaced with a new one. The laser printer may also be defective and requires further inspection and confirmation. 6. The hydraulic oil, cutting oil, coolant, lubricating oil, and other fluids have been stored or used Ijdjz Dfn Aepfx Apcoig for an extended period and should be replaced with new fluids. 7. The pneumatic system hoses/pipes should be inspected for aging, cracks, or damage. Replacement will be required if any deterioration or leakage is found.

Condition: used, functionality: fully functional, ---EURING PROFILE BENDER CM 2000 (N.1), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg Iodpfx Aown Hz Ropcjig ---EURING PROFILE BENDER CM 2000 (N.2), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg

Condition: used, Year of construction: 2019, gebraucht 2019 5505 Isdpfxswiqwle Apceig prompt, Zwischenverkauf v Niederlande 2670 € 1 100 x 2.000 mm 20 - 76,1 mm 1 3 kW 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, A mobile extraction unit with a large filter area and a set of hoses for a small workshop. Technical data: - Extraction nozzle diameter: 160 mm Iedeztvwcjpfx Apceig - Motor power: 1.5 kW - Dimensions: 1,220 x 650 x 3,270 mm

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm Ijdpfx Apju Id Ruscsig spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: excellent (used), Year of construction: 2023, tube diameter 42.0 x 3.0 STAHL mm tube diameter 30.0 x 2.0 EDELST mm bending angle max. 180 ° bending radius max. 100 mm bending speed 2.0 U/min. Control NC voltage 400 V total power requirement 0.55 kW weight of the machine ca. 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless * up to 50 programs can be stored - Automatically returns to the starting position Iiodpfxsx U El Ie Apcsg - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base

Condition: used, functionality: fully functional, Year of construction: 1984, Max. bending length: 3150 mm; Max. sheet thickness: 16 mm; Min. inner diameter of rolled tube: 550 mm; Rolling speed: 7 mm/min; Roll adjustment speed: 2x22 mm/min; Machine dimensions (L x W x H): 7900x1930x2500 mm; Machine weight: 46,800 kg. Iiodpfexxvlksx Apcog

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton Iedpfxoy T Szys Apceig CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM