Used Laser Cut for sale (15,761)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH Guedpfxsywwrfe Aa Esd • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. Gujdpjg R Hrqofx Aa Ejd 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Trumpf TruLaser 5030 Classic, including Liftmaster, in good condition, for sale. The machine is being sold due to a facility upgrade. Working area: 3,000 x 1,500 mm Laser source: CO₂ laser Laser power: 5 kW Year of manufacture: 2011 Gujdpfx Aszlttlsa Esd Control system: Siemens Sinumerik Max. sheet metal size: 3,000 x 1,500 mm Processable materials: Steel Stainless steel Aluminum Available immediately Inspection possible at any time by appointment.

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: Fibermark SM 6000 3X1.5 Gen-5 | Serial Number: 33122-ERH | Year of Manufacture: 2024 | Working area: 3000 x 1500 mm; Resonator: 6000 Watt IPG-YLS fiber laser technology | Max. peak power: 6000 W | Laser wavelength: 1075+/-5 μm | Axes: X-U-Y-Z | Max. axis speed: 100 m/min | Acceleration: 2.5 G | Voltage: 380 V | Power: 28 kW | Protection class: IP 65 | Dimensions (approx.): 5295 mm x 2325 mm x 10360 mm (W x H x L) | Approx. weight: 14590 kg | Colour: Black-White-Orange | Structure: Steel | Working area: 3x1.5 meter laser processing field | The specified dimensions are approximate values. All other details are without guarantee. Guedpfxjy N Dkfo Aa Ejd

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. Gsdezlr Syepfx Aa Ejud The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Guodpfjzlr Rpsx Aa Eod Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New laser cutting machine with 12 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A meticulously developed cutting parameter library is included, as well as first-class service. Please also consider our attractive leasing/financing options. - Machine with automatic shuttle table - Machine bed lined with graphite plates Gusdpfx Aajxg Dn Aj Ejd - Machine measured and aligned using the Renishaw system (including inspection protocol) - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 8.5 x 3.5 meters footprint - 12 kW laser source from MaxPhotonics (G5/German version) - Top quality, schedule your inspection now! Cutting capabilities: - Steel sheets up to 35 mm - Stainless steel sheets up to 20 mm - Aluminum sheets up to 20 mm - Travel range: 1500 x 3000 mm - CNC control system in German - Safety light curtain for maximum operator protection - Extensive collision protection features for the cutting head - Large laser safety windows on three sides for monitoring the cutting process - Automatic, programmable 3-gas switching system (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter file - Includes nesting module - Very user-friendly - High-performance laser chiller - CNC control system in German - Extensive service and warranty packages - Powerful laser chiller - Filter extraction system optional Sale is strictly to commercial customers only. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 5500 kg Need a different laser power, table type, or table size? No problem. I will gladly provide a tailored offer. For example: 2 kW machine from €29,990 or 6 kW machine from €79,900 Not sure which laser power is right for your application? Just call us! Of course, I will carry out cutting trials per your requirements. There are many possibilities here.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: HypCut, laser type: fiber laser, laser source manufacturer: MaxPhotonic, laser power: 20,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 100 mm, sheet thickness aluminum (max.): 60 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 12 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input current: 110 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 20 bar, overall weight: 9,500 kg, warranty duration: 12 months, door opening width: 1,000 mm, door opening height: 2,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, New laser cutting machine with a 20 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of supply, as is first-class service. - 20 kW laser power for maximum performance - Machine incl. automatic exchange table - Machine bed lined with graphite plates - Machine measured and adjusted with Renishaw system (including measurement report) - Space-saving - Extremely energy-efficient cutting system - Requires only approximately 9.5 x 3.5 meters of floor space - 20 kW laser source from MaxPhotonics (G5/EU) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Vision Control (positioning and nesting via camera system) - Top quality, schedule a viewing now! Cutting of steel sheets up to 50 mm Cutting of stainless steel sheets up to 50 mm Cutting of aluminum sheets up to 50 mm - Travel range 1500 x 3000 mm - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - On three sides, large laser protection windows for observing the cutting process - Automatic, programmable 3-gas switching (Compressed air, nitrogen, oxygen) - Extensive cutting parameter file - Incl. nesting module - Very easy to operate - High-performance laser cooler - Machine control in German - Extensive service and warranty services - High-performance laser cooler - Filter extraction system optional Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 9500 kg Gujdpfoyhhnkox Aa Esd Do you need a different laser power, table shape, or table size? No problem. I would be happy to prepare a suitable offer for you. e.g. 2 kW machine from 29,990 euros or 6 kW machine from 79,900 euros Are you unsure which laser power is suitable for your application? Just call! Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 200 h, machine/vehicle number: 31015, control type: PLC-controlled, degree of automation: manual, actuation type: manual, controller manufacturer: 4JET, laser type: fiber laser, laser hours: 200 h, laser power: 200 W, laser wavelength: 1,064 nm, power: 200 kW (271.92 HP), type of cooling: water, compressed air connection: 5 bar, overall weight: 350 kg, total length: 1,310 mm, total width: 525 mm, total height: 1,454 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, We offer a non-contact, mobile laser cleaning system, model 4JET M200, which was used solely for demonstration and testing purposes. We also offer a wide range of accessories, including: fiber extension cables (3m to 10m), 5 pieces; laser safety goggles; and a mobile laser protection curtain with frame. Gujdpfjzlrzzjx Aa Eod

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: CypCut, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 3000W, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 80 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning speed: 80 m/min, positioning accuracy: 0.02 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,700 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Fiber laser cutting machine 3000W 1500×3000 is a modern CNC device designed for precise metal cutting in industrial applications. Thanks to the use of an efficient Raycus laser source and the advanced CypCut control system, the machine ensures high accuracy, repeatability, and ease of operation. Its solid, welded and stress-relieved structure guarantees operational stability and resistance to deformation, resulting in long service life and reliability. The machine offers a large working area of 1500 × 3000 mm and high travel speeds of up to 80 m/min, enabling efficient processing of both individual parts and mass production. The WSX cutting head with automatic focus adjustment (autofocus) ensures optimal cutting parameters for different materials and thicknesses, significantly reducing the need for manual adjustments and increasing productivity. The device can handle a wide range of materials such as carbon steel, stainless steel, aluminum, brass, and copper, delivering clean edges and high-quality finishes. An additional advantage is the use of high-quality components such as INOVANCE servo drives, linear guides, and a reliable S&A water chiller, ensuring stable and continuous operation even in 24/7 mode. The machine is designed with user safety and comfort in mind, offering safety systems, easy access to controls, and the possibility of integration with additional systems such as fume extraction or automated loading. It is an efficient and cost-effective solution for companies seeking modern laser cutting technology. Gsdsyw R Rnjpfx Aa Esud Delivery to the customer is available. Delivery cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Godeg Tu N Aopfx Aa Eoud Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: used, Year of construction: 2016, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: PowerLine F50, laser power: 50 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, dust extraction, fume extraction, Rofin PowerLine F50 fiber laser including Fuchs MKF335 extraction and filter system – year of manufacture 2016 We are offering a used Rofin PowerLine F50 fiber laser marking system for sale, including a Fuchs MKF335 extraction and filter system. Technical data: Godpfx Aajzlki Rs Eeud Laser manufacturer: Rofin Model: PowerLine F50 Laser power: 50 W Year of manufacture: 2016 Condition: Used Extraction system: Manufacturer: Fuchs Umwelttechnik Model: MKF335 Extraction and filter unit for laser applications Scope of delivery: Rofin PowerLine F50 laser system Laser head Control unit Fuchs MKF335 extraction and filter system Connection cables Operating manuals Scope of delivery as shown in the photos

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, Simple laser tube cutting – reliable, versatile, and profitable. Economical laser cutting of tubes up to 170 mm outer diameter, even with low utilization rates. Whether you want to insource quality, manufacture in a more flexible and faster manner, or tap into new customers and markets: the TruLaser Tube 3000 is your machine, and thanks to its easy operation, it is also ideal for beginners or as an additional machine. Included: Tube support (raw material) with automatically retractable tube supports Solid-state laser TruFiber 3001 Machine bed for 6.5 m raw material length Unloading station for 3 m finished part length (including scrap container) LoadMaster Tube for 6.5 m raw material length (including bundle trough) for automated loading Optional extensions: Machine bed for 8.0 m raw material length for loading and unloading Technology packages for bevel cutting, Rapid Cut, and reduction of spatter adhesion (Spatter Guard) Weld seam detection (SeamLine) inside and outside Highly innovative and user-friendly TRUMPF programming with Programming Tube Service: Installation, commissioning, training 12 months warranty Remote service agreement in the first year TRUMPF quality Gsdpfezi Rc Eex Aa Esud Our fast remote service support takes care of your needs worldwide. For further technical data, please refer to the data sheet or visit our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design and implementation of many thousands of sheet metal fabrication projects, particularly in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, as well as experts in software, automation, and smart factories, you will always receive a customized offer that is tailored to your requirements. P.S.: We will also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with both financial and entrepreneurial challenges.

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer Gedpfx Aozlhcnsa Eoud NitroLine FocusLine PlasmaLine SprintLine ContourLine

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,300 h, machine/vehicle number: P7.02.00.03, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser hours: 6,300 h, table length: 3,000 mm, table width: 1,500 mm, power: 3 kW (4.08 HP), type of cooling: water, Prima Power Platino 1530 Laser Cutting Machine for Sale We are offering for sale a Prima Power Platino 1530 laser cutting machine, manufactured in 2017. The machine is in excellent working condition and is currently still in operation. The only reason for the sale is the arrival of a new machine. This laser was purchased new by our company and has been used exclusively for our own production. It has been regularly serviced and carefully maintained throughout its lifetime. Current machine hours: 19,900 power-on hours 6,300 cutting (working) hours It operates flawlessly, has been extremely reliable over the years, and remains in excellent overall condition. Guodozlfmdjpfx Aa Eod If you require any additional information or would like to arrange an inspection, please feel free to contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 3,200 h, laser type: fiber laser, laser power: 6,000 W, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, No minimum price – guaranteed sale to the highest bidder! Gujdpfezldx Ssx Aa Eed TECHNICAL DETAILS Laser power: 6,000 W Sheet metal format: 4,000 mm x 2,000 mm MACHINE DETAILS Control type: CNC control Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLR Operating hours: 3,200 h EQUIPMENT QBM Precitec cutting head Cooling unit Fume extraction Dust extraction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC laser cutting machine TruLaser 3030 (L20) 5000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 5000 Watt Operating hours: 43,349 hrs Laser beam on: 29,598 hrs Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Closed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit - Automatic pallet changer in the longitudinal direction - 17" touch color screen - Longitudinal conveyor belt Guedpfx Ajzix Upea Eod - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Lens with RFID chip Control system - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panes - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment and LensLine with automatic condition monitoring) - CoolLine - Extended pallet infeed - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Gusdpfjhwhfqsx Aa Esd Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, FSCUT Ethercat CNC Control System DELTA Ethercat Servo Driver & Motor System Hiwin Guide Liner Gjdpfjnr Hcwox Aa Esud SMG / KH Rack Raytools / BLT Series Cutting Head Laser source 6kW HanLi Chiller Gross weight around 9.5ton Optional: bevel cutting for sheet

Condition: new, Year of construction: 2024, 5 Axes FSCUT 3000S CNC Control System DELTA Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head Guodpfx Aaonr Hghe Eed HanLi Chiller SMC Proportional Valve. Dairuike Auto Pneumatic Clamp φ220mm Various Diameter Wheels Pneumatic Support Loading Assist System Gross weight around 5.5ton

Year of construction: 2017, condition: ready for operation (used), A Trumpf CNC 2D solid-state laser cutting machine is available. Laser source: Trumpf TruDisk 4001, laser power: 4kW, wavelength: 1030nm, working dimensions X/Y: 3000mm/1500mm, Z-axis travel: 75mm, max. workpiece weight: 900kg, max. simultaneous traverse speed: 140m/min, max. mild steel thickness: 25mm, pallet changers: 2. Machine dimensions X/Y/Z: approx. 8300mm/6800mm/2300mm, weight: approx. 7750kg. Documentation available. An on-site inspection is possible. Expected to be available starting 2027. Gusdpfxjzk Nbco Aa Eed

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° Guedpfxozikcfo Aa Eod 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms Gedozikb Uepfx Aa Esud 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Guodpfx Aex Eh Droa Eod Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 2726

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Maxphotonics, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Why still bother with the cut quality of fine plasma systems? Why still waste valuable space in your workshop with a rotary table? Why still spend thousands of euros each year on expensive plasma wear parts? In addition to the obvious advantages of modern fiber laser technology regarding precision and virtually burr-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is much easier to operate than plasma cutting systems. And the best part is that we, Schmidt & partners Cutting, support your system from our two service centers throughout its entire service life. We are a reliable partner in the cutting world, providing perfect consulting, installation, training, maintenance, and repair services. We support you with our know-how and experience, including cutting parameters for special materials. We also gladly assist you with the implementation of this technology in your company, particularly with regard to the specific occupational safety aspects of laser technology. kaitec FIBER Pro HGLQ 3015 Cutting area 1,500 x 3,000 mm Max. sheet thickness 35 mm (depending on the laser source power) Gedszkuu Ispfx Aa Esud Laser systems 2kW / 3kW / 4kW / 6kW / 12kW Maxphotonics series (in cooperation with AK Industry GmbH, the certified service partner in Germany) CE certified, risk assessment completed Do you not yet have a suitable filter system? We will gladly select the appropriate filter system to meet your needs. We look forward to hearing from you!