Used Ktl for sale (150)

Condition: not inspected (used), Year of construction: 2022, operating hours: 555 h, Crawler crane Manufacturer: TGT, Model: Robby 2000 Universal, Crane: Palfinger 2700, Year: 2022, Crane lifting capacity: up to 2,000 kg, Working height: up to approx. 6.5 m, Extensions: fully hydraulic, Fly jib: TGT Flyjib 'Robby 2000', Undercarriage: crawler undercarriage, Undercarriage width: telescopic, Coating: KTL coated, Engine: Vanguard, Own weight: approx. 1,700 kg, approx. 555 operating hours, without trailer Blodoy Eymhjpfx Adrei

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space length: 6,550 mm, loading space width: 2,550 mm, total width: 2,550 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial list of equipment. Full equipment details available upon request. Chassis: * Steel welded construction with welded longitudinal beams and through Z cross-members, narrow cross-member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly, under the loading floor, with two insertion pockets for one loading ramp each, locking plate in rear header Underrun Protection: * According to EU regulations Front Landing Legs: Bedpfx Adoy Auhbjroli * Landing legs with single-sided operation Rear Support: * Two adjustable drop-down supports Axles: * 2 x 10 t air suspension axle assemblies by SAF, drum brakes approx. 300 x 200 mm, centrally mounted wheels for twin tires, ABS, total air suspension travel approx. 200 mm (lift approx. 140 mm, lowering approx. 60 mm), control via hand lever with latching function Tires: * 8 units, 235/75R 17.5 – make of our choice, on steel rims 6.75 x 17.5, mounted with offset Splashguards: * PVC, fitted in front of and behind the axles as per EU regulations Load Securing: * Around the outer frame, one hole every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with the side walls closed, chamfered outer frame) * 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t * Stake pockets for 80/50 plug-in posts: 3 pairs of stake pockets on the outer frame, evenly distributed Brake System: * Pneumatic brake system in accordance with EU regulations with EBS * Two coiled lines for connection to the towing vehicle, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm thick Z-type hardwood floor recessed into the outer frame Front Wall: * Made from 25 mm side wall, removable Lighting System: * Lighting according to EU regulations, 24 volt, multi-chamber tail lights, license plate lights, side marker lights, and lane marker lights at the rear, connection plate on the left at drawbar including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holder * Removable beacon at the rear * Supplied with an additional 40 mm towing device (GVW max. 13,500 kg) Painting: * Chassis shot-blasted, cleaned and hot-dip galvanized to latest technical standards * Body parts cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Side walls: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Attachments: galvanized / KTL black Conspicuity Marking: * According to EU, yellow on sides and rear Including Special Accessories: * Rear extension by approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable drawbar adjustable in length, 6 x approx. 100 mm, bolted drawbar eye approx. 50 mm, according to DIN 74053 * 4 rows of crosswise stake pockets on the loading platform, evenly distributed * 12 galvanized plug-in stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20' container, extendable to approx. 2,820 mm, as per ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Bedsy Auhzepfx Adrsli Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,400 mm, loading space length: 8,100 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL | Construction Machinery & Aerial Work Platform Transporter ----Vehicle Data * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 hp) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Permissible total weight: 26,000 kg * Mileage: 25,229 km * Colour: White * Combustion engine ----Truck Equipment * Long-distance driver’s cab * Auxiliary heating * Safety package * Driver comfort package * Storage package * Trailer package * Steerable tag axle * LED rear lights * Sun visor * Rotating beacons * Reversing camera Bedpfx Aeyn Tv Tjdrsli * Multifunction steering wheel * 1 sleeper bunk * Refrigerator * Media system with navigation * Automatic climate control ----Superstructure * Low-profile construction from laser-cut and precision-bent special profiles * Body length approx. 8,100 mm * Frame height unladen approx. 1,050 mm * Frame width approx. 2,550 mm * 2 extension ramps (each with 1 fixed and 1 extendable section) * Ramps laterally adjustable * Ramp surface made of grating * Mechanical ramp locking * Holders on exterior frame for ramps when not in use * Electro-hydraulic ramp operation * Emergency control at control valve block * Manual pump in case of system failure * Hydraulic rear supports * Radio remote control for all hydraulic functions * Grating floor with increased load capacity * Rear end with inclined ramp * Bulkhead approx. 2,000 mm high, angled inwards * Stainless steel toolbox inside in front of bulkhead * 2 stainless steel toolboxes on the side of the frame (left/right) * 1 stainless steel toolbox at rear right (hydraulic unit/control block) * Work lights: * 1 pair on back of cab * 2 pairs on frame sides * 2 pairs on the rear * 2 access steps for loading area walk-on access ----Load Securing * Longitudinal beams with Multi-X contour and 2.5 t lashing points * 6 pairs of 6-ton lashing points in the longitudinal beams * Perforated outer frame with 2.5 t lashing points * 6 pairs of 6-ton lashing points on the outer frame * 4 x 6-ton lashing points at rear * 4 x 6-ton lashing points below in front of the bulkhead toolbox ----Paintwork * Body KTL powder-coated in RAL 9005 black * Bulkhead painted RAL 9005 black * Ramps and grating galvanized ----Markings * Reflective tape on sides and rear according to EU regulations For further information, we are happy to assist you.

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, first registration: 10/2024, loading space length: 8,100 mm, color: white, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL – Construction Machinery & Access Platform Transporter ---- Vehicle Data * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 hp) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Permissible total weight: 26,000 kg * Mileage: 25,229 km * Color: White * Internal combustion engine ---- Truck Equipment * Long-distance driver’s cab * Auxiliary heater * Safety package * Driver comfort package * Storage package * Trailer package * Steered trailing axle * LED tail lights * Sun visor * Warning beacons * Reversing camera * Multifunction steering wheel * 1 sleeping bunk * Refrigerator * Media system with navigation * Automatic climate control ---- Body * Low-profile construction with laser-cut, precision-bent special profiles * Body length approx. 8,100 mm * Frame height (unladen) approx. 1,050 mm * Frame width approx. 2,550 mm * 2 extension ramps (each: 1 fixed section + 1 extending section) * Ramps laterally movable * Ramp surface made of grating * Mechanical ramp locking * Holder on the outer frame for unused ramps * Electro-hydraulic ramp drive * Emergency manual control on control block * Hand pump in case of total failure * Hydraulic rear supports * Wireless remote control for all hydraulic functions * Grating floor with increased load capacity * Tapered rear end * Bulkhead approx. 2,000 mm high, inward bent * Stainless steel toolbox inside in front of the bulkhead * 2 stainless steel toolboxes on the side of the frame (left/right) * 1 stainless steel toolbox at the rear right (hydraulic unit/control block) * Work lights: * 1 pair on the back of the cab * 2 pairs on the sides of the frame * 2 pairs at the rear * 2 steps for access to the loading area ---- Load Securing * Longitudinal beams with Multi-X profile and 2.5 t lashing points * 6 pairs of 6 t lashing points in the longitudinal beams * Perforated outer frame with 2.5 t lashing points * 6 pairs of 6 t lashing points in the outer frame * 4 pcs. 6 t lashing points at the rear * 4 pcs. 6 t lashing points below, in front of the bulkhead toolbox Bsdpfjyn Tvtjx Adroli ---- Paintwork * Structure KTL powder-coated in RAL 9005 black * Bulkhead painted in RAL 9005 black * Ramps and grating galvanized ---- Marking * Reflective tape on sides and rear to comply with EU regulations Please feel free to contact us for further information.

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL | Construction Equipment & Access Platform Transporter ---- Vehicle Data * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 HP) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Gross vehicle weight: 26,000 kg * Mileage: 25,229 km * Color: White * Internal combustion engine ---- Truck Equipment * Long-distance driver’s cab * Auxiliary heating * Safety package * Driver comfort package * Storage package * Trailer package * Steerable trailing axle * LED rear lights * Sun visor * Warning beacons * Reversing camera * Multifunction steering wheel * 1 sleeping bunk * Refrigerator * Media system with navigation * Automatic climate control ---- Body Specifications * Low-profile construction using laser-cut, folded special profiles * Body length approx. 8,100 mm * Frame height unladen: approx. 1,050 mm * Frame width: approx. 2,550 mm * 2 telescopic ramps (each with 1 fixed part + 1 extendable section) * Ramps laterally adjustable * Ramp surface made of grating * Mechanical ramp locking * Ramp holders on the outer frame when not in use * Electro-hydraulic ramp drive * Emergency manual control on the control block * Hand pump in case of complete hydraulic failure * Hydraulic rear supports * Radio remote control for all hydraulic functions * Grating floor with increased load capacity * Rear with chamfered edge * Front wall approx. 2,000 mm high, inwardly folded * Stainless steel storage box inside, in front of the front wall * 2 stainless steel toolboxes mounted on the frame (left/right) * 1 stainless steel toolbox rear right (for hydraulic unit/control block) * Work lights: * 1 pair mounted at rear of cab * 2 pairs mounted on sides of frame * 2 pairs mounted at rear * 2 access ladders for cargo area inspection ---- Load Securing * Longitudinal beams with Multi-X contour and lashing points, 2.5 t * 6 pairs of 6 t lashing points in the longitudinal beams * Perforated outer frame with lashing points, 2.5 t * 6 pairs of 6 t lashing points on the outer frame * 4 pieces of 6 t lashing points at the rear * 4 pieces of 6 t lashing points below, in front of the front wall box ---- Paintwork Blsdpfx Adoyn Tu Nersi * Body KTL powder-coated in RAL 9005 black * Front wall painted RAL 9005 black * Ramps and grating galvanized ---- Decals * Reflective film on sides and rear in accordance with EU regulations For further information, please feel free to contact us.

Condition: new, axle configuration: 3 axles, color: white, Year of construction: 2026, Equipment: ABS, = Further Options and Accessories = - Air suspension = Notes = EUROMIX MTP 12 cbm Mixer Trailer EUROMIX MTP – Mixer Body EM 12 R – Standard Model: EM 12 R Nominal volume: 12m³ ready-mix concrete Mixing drum of standard design Mixing drum in standard version made of S355 material Mixing spirals in standard version made of S420 MC material Gearbox: ZF P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Integrated oil cooling system Mixing control: mechanical and start/stop electrical Compressed air water system Water connection at the platform with hose line Water filling line, single-sided with C-coupling Mixing drum with a service hatch Access ladder with working platform Rubber extension at the charging hopper Swiveling, single-arm discharge chute made of steel Wear plates in charging hopper, discharge tray and swivel chute Drum locking device to secure the drum during maintenance work Polyurethane primer Weight approx. 4,725 kg, tolerance +/- 5% with emergency stop function in accordance with EU safety standards Steel mudguards over the rear axles 2x extension chutes made of steel or plastic Water system Water tank 650 l (compressed air) Steel water tank Shut-off valve mounted below the water tank in the filling line Water connection with “C” coupling, Operation & electrics Mixer operation – mechanical at the rear Start-stop system (with EDC) Geometric volume 19,420 L Water tank volume 12,787 L Tank inclination 10.5° Length 7,545 mm Width 2,300 mm Height 2,765 mm Engine: FTP 55 kW Bledpfx Adsym Sy Uersi Mounted on Euromix MTP 3-axle semi-trailer Vehicle type: EuromixMTP KIS 24 3-axle mixer chassis Axles with short control arm ratio (310/340) for paving application including 1 Axle: 9t SAF 22.5" disc brake, single tires for air suspension, including 3 Track width of axles: 2,040 mm (standard dimension), including 3 Axle distance approx. 1,400 mm / 1,400 mm, including 1 EBS brake system Tires 385/65 R 22.5 Plastic mudguards, 180 degrees, over each axle (for 3 axles), including 1 Chassis paint in RAL 9005 deep black, including 1 KTL with zinc phosphating plus powder coating, highest corrosion protection (only with color availability in powder), including 1 Tire pressure control base version, connected to the CAN bus system of the EBS, including 1 24 t telescopic landing gear with one-sided operation and half-round with base plate, including 1 Axle loads: 24,000 kg (3 x 8,000 kg, technically: 3 x 9,000 kg), including 1 Chassis length approx. 8,570 mm, including 1 For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further Information = Year of manufacture: 2026 Usable material: Concrete gross vehicle weight: 44,000 kg Body brand: EuromixMTP EM 12 R Contact Denis Omeragic for further information.

Condition: new, empty load weight: 1,620 kg, maximum load weight: 980 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,400 mm, loading space volume: 16.4 m³, color: black, construction height: 2,680 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY AVAILABLE - Number of animals: 2 - Gross vehicle weight: 2.600kg - Unladen weight: 980 kg - Payload: 1,620 kg - Interior dimensions: 378 x 181 x 240 cm (L x W x H) - Overall exterior dimensions: 503 x 229 x 268 cm (L x W x H) - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100km/h: Included! - incl. vehicle documents Vehicle superstructure: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: full polyester - Colour: black - Tack room: yes - Tack room equipment: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door lock - Feed troughs: no - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: -- Partition walls - Distance between partition walls: adjustable - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: hinged door and tailgate combination - Drain flap: yes, wide at the front - Overrun device & brake: KNOTT - Plug lighting: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - Pullmann2 chassis independent wheel suspension with coil spring - incl. wheel shock absorbers Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - External tie-down option - Internal tie-down option - Adjustable and telescopic partition walls with head grille - PVC transparent partition wall - Individual wheel mudguards, plastic (black) - drain flap at front - side opening flaps - many sliding windows - rubber glued to floor and sealed - hay rack - step protection on side walls (GRP plastic) - maneuvering handle - spare wheel with holder - tarpaulin roller blind as net - lifting device gas pressure shock absorber on tailgate - step on rear flap - 3rd brake light on rear flap - light on rear flap - light on rear flap - light on rear flap - light on rear flap. Brake light on rear flap - Lighting system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Feed trough for hanging with holder - Video surveillance system incl. reversing camera - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Blodpfx Adju Hrtuerji

Condition: new, empty load weight: 765 kg, maximum load weight: 835 kg, overall weight: 1,600 kg, axle configuration: 2 axles, loading space length: 3,180 mm, loading space width: 1,400 mm, loading space height: 2,300 mm, loading space volume: 10.3 m³, color: grey, construction height: 2,700 mm, working width: 1,840 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 1 + foal - Permissible total weight: 1,600 kg - Unladen weight: 765 kg - Payload: 835 kg - Interior dimensions: 318 x 140 x 230 cm (L x W x H) - Overall exterior dimensions: 452 x 184 x 270 cm (L x W x H) - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: Full polyester - Tack room: No - Tack room equipment: -- - Feed troughs: optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 102 to 122cm, adjustable - Distance between stall bars: 162 to 182cm, adjustable - Distance between tack room and breast bar: -- - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: Yes, front left in direction of travel - Overrun device & brake: KNOTT - Plug lighting: 13-pin Standard equipment: - Pullmann2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tethering option outside - Tethering option inside - Padded safety stall bar system - Continuous stall bars with plastic protection - Height adjustment for stall bars - Depth adjustment for stall bars - Panic release at front - Single wheel mudguards, plastic (black) - Lockable entrance door - Door retainer on entrance door - Windows on sides and in entrance door openable - Door lockable - Door lock on entrance door - Door lock on side and in entrance door openable, side and in entrance door can be slid open - Rubber glued and sealed to floor - Hay net hooks - Maneuvering handle - Side pads (2 pieces) - Step protection on side walls (GRP plastic) - Lifting device gas pressure shock absorber on tailgate - Step on rear flap - Tarpaulin roller blind as net - Lighting system with reversing light - Plug 13-pin Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Spare wheel with holder - Spare wheel cover - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Additional angle lever lock on door - Additional interior light at rear - Folding foal grille - Feed trough for hanging with holder - Full-length, padded (rear) box bar with add. Box bar continuous, padded (front) with additional holders - Wear mat - Video surveillance system incl. reversing camera - Aluminum head partition on PVC partition - Grid head partition on PVC partition - Various decors New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bljdpfxou Hrqto Adrsi

Condition: new, empty load weight: 1,630 kg, maximum load weight: 970 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, loading space volume: 15.7 m³, color: black, construction height: 2,680 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 2 - Gross vehicle weight: 1,630 kg - Unladen weight: 970 kg - Payload: 1,630 kg - Interior dimensions: 378 x 181 x 230 cm (L x W x H) - Overall exterior dimensions: 503 x 229 x 268 cm (L x W x H) - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: Included! - incl. vehicle documents Vehicle superstructure: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: full polyester - Colour: black - Tack room: yes, large saddle compartment - Tack room equipment: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door holder - Feed troughs: no, optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 106 to 127cm, adjustable - Distance between stall bars: 173 to 205 cm, adjustable - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - Pullman2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tying possibility outside - Tying possibility inside - Stainless steel tie rod mounted on the right + suitable for feed troughs - Floor-to-ceiling ALU entrance door on the right + sliding window + aluminum handle, lockable - Tack room inside XXL with swiveling saddle holder - PVC transparent partition wall - Single wheel mudguards, plastic (black) - many sliding windows - rubber glued to floor and sealed - hay net hooks - step protection on side walls (GRP plastic) - maneuvering handle - tarpaulin roller blind as net - lifting device gas pressure shock absorber on tailgate - step on rear flap - 3rd brake light on rear flap - light Light system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Feed trough for hanging with holder - Video surveillance system incl. reversing camera - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bljdpfxou Hrtho Adrei

Condition: new, empty load weight: 574 kg, maximum load weight: 2,126 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 2.2 m³, color: black, construction height: 940 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, side walls KTL-coated anthracite & rims black, * IMMEDIATELY AVAILABLE * incl. side walls KTL-coated anthracite & rims black Technical data: - Type: New vehicle with 2 years TÜV from first registration - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,700 kg - Unladen weight: 574 kg - Payload: 2.126 kg - Interior dimensions: 405 x 180 x 30 cm (L x W x H) - Exterior dimensions: 537 x 186 x 94 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13 steel rim - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h for an extra charge. Standard equipment: - Low chassis, tires 195/50R13C, loading floor height: approx. 64cm - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminium side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the ramps, - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner stanchions - multiplex wooden floor with anti-slip surface - very sturdy welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN / kg) TÜV certified! - Lashing hooks on hinged lower sections - Maintenance-free rubber spring axle - Automatic reverse - Overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large safety lighting - Lighting recessed in rear frame, integrated rear fog light - Automatic center support wheel Accessories optionally available: - High front grille, 70cm - Tarpaulin + bows - Rear light protection grille - Rotating & crankable rear supports - Anti-theft device - Grids, side wall attachments, nets and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bedpfxou N Nkis Adreli

Condition: new, empty load weight: 510 kg, maximum load weight: 2,190 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: black, construction height: 950 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, side walls KTL-coated anthracite & rims black, * IMMEDIATELY AVAILABLE * incl. side walls KTL-coated anthracite & rims black Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2.700 kg - Unladen weight: 510 kg - Payload: 2,190 kg - Internal dimensions: 335 x 180 x 30 cm (L x W x H) - External dimensions: 467 x 186 x 95 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Aluminium drop sides color in anthracite - 30cm mounted - Aluminium drop sides anodized double-walled - All drop sides foldable and removable - Steel corner stanchions removable - Insertion possibility at all 4 corners for tarpaulin racks, grid attachment, drop side attachments or front wall elevation - Sturdy eccentric locks - Screen-printed wooden floor, continuous without impact, slip-resistant and waterproof - Reinforced stable bolted V-drawbar - Very stable welded steel frame - Frame compl. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - all cross and longitudinal beams rest on the floor - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear, for easier attachment of the ramps - cargo net hooks on lower hinge parts - maintenance-free rubber spring axle from KNOTT - automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Optional accessories available: - High front grille, 70 cm - tarpaulin + bows - rear light guard - rotating & crankable rear supports - anti-theft device - grilles, side wall attachments, nets and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Bodpou Ht Hvsfx Adroli

Condition: new, empty load weight: 900 kg, maximum load weight: 1,700 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, loading space volume: 12.5 m³, color: grey, construction height: 2,680 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability:* IMMEDIATELY AVAILABLE * - Number of animals: 2 - Gross vehicle weight: 2.600kg - Unladen weight: 900 kg - Payload: 1,700 kg - Interior dimensions: 320 x 167 x 230 cm (L x W x H) - Overall exterior dimensions: 447 x 215 x 268cm (LxWxH) - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100km/h: Included! - incl. vehicle documents Vehicle body: - Floor: ALUMINIUM floor - Drop sides/body: Anodized double-walled aluminium - Roof material: Full polyester - Tack room: Yes - Tack room equipment: Storage basket, luggage net, adjustable saddle holder, make-up mirror, bridle holder, lockable door, door lock - Feed troughs: optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: approx. 102 and 122cm - Distance between stall bars: approx. 175 and 187cm - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: Yes, front with tread strips - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Registration: COC papers, registration with green license plate possible for sports purposes Standard equipment: - Pullmann2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tethering option outside - Tethering option inside - Split stall bars with plastic protection - Center post partition, front and rear pivoting, removable - Height adjustment for stall bars - Depth adjustment for stall bars - Panic release at front - Fixed head grille and removable privacy screen - High side access door - Lockable access door - Door retainer on access door - Single wheel mudguards, (black) - Rubber glued to floor and sealed - Hay net hooks - Side padding (2 pieces) - Step protection on side walls (GRP plastic) - Tarpaulin roller blind as net - Maneuvering handle - Lifting device gas pressure shock absorber on tailgate - Step on rear flap - 3rd brake light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap. 3rd brake light on rear flap - Lighting system with reversing light - 13-pin plug Special equipment included in the price: - Tack room inside with: Adjustable saddle holder, net, mirror, bridle holder, storage basket Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Spare wheel with holder - Spare wheel cover - Anti-sling hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Saddle rack (KTL-coated) - Additional interior light - Foal grille - Feed trough for hanging with holder - Chest bar pad - Box bar continuous, padded (rear) - Full-length, padded stall rail (front) - Wear mat/scratch mat - Video surveillance system incl. reversing camera New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BA Blsdpfx Aeu Hrr Dedroi

Condition: new, empty load weight: 1,280 kg, maximum load weight: 2,220 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,200 mm, loading space width: 2,070 mm, loading space height: 2,300 mm, loading space volume: 20.3 m³, color: black, construction height: 2,720 mm, working width: 2,340 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, 2x roof ventilator, interior ceiling storage, * IMMEDIATELY AVAILABLE * incl. 2x roof ventilator, interior ceiling storage Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 3 - Gross vehicle weight: 3,500 kg - Unladen weight: 1,280 kg - Payload: 2,220 kg - Interior dimensions: 420 x 207 x 230 cm (L x W x H) - Overall exterior dimensions: 527 x 234 x 272 cm (L x W x H) - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: Included! - incl. vehicle documents Vehicle body: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: full polyester - Colour: black - Tack room: yes - Tack room equipment: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door lock - Feed troughs: no - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: - - Distance between partitions: - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: hinged door and tailgate combination - Drain flap: yes front wide - Overrun device & brake: KNOTT - Plug lighting: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - Pullmann2 chassis independent wheel suspension with coil spring - incl. Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - External tie-down option - Internal tie-down option - Adjustable and telescopic partitions with head grille - PVC transparent partitions - Individual wheel mudguards, plastic (black) - drain flap at front - side opening flaps - many sliding windows - rubber glued to floor and sealed - hay rack - step protection on side walls (GRP plastic) - maneuvering handle - spare wheel with holder - tarpaulin roller blind as net - lifting device gas pressure shock absorber on tailgate - step on rear flap - 3rd brake light on rear flap - light on rear flap - light on rear flap - light on rear flap - light on rear flap. Third brake light on tailgate - Lighting system with reversing light - 13-pin plug Special equipment included in the price: - 2 roof ventilators - Interior ceiling shelf Accessories can be retrofitted - please enquire: - Cover for automatic support wheel - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Saddle storage bracket (KTL-coated) - Feed trough for hanging with holder - Video surveillance system incl. reversing camera - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bljdpfx Adju Hrt Iorei

Condition: new, empty load weight: 600 kg, maximum load weight: 2,100 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, loading space volume: 2.5 m³, color: black, construction height: 940 mm, working width: 2,060 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, side walls KTL-coated anthracite & rims black, * IMMEDIATELY AVAILABLE * incl. side walls KTL-coated anthracite & rims black Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,700 kg - Unladen weight: 600 kg - Payload: 2.100 kg - Interior dimensions: 405 x 200 x 30 cm (L x W x H) - Exterior dimensions: 561 x 206 x 94 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - Low chassis, 195/50R13C tires, loading floor height: approx. 64 cm - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminum side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the ramps, - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner stanchions - multiplex wooden floor with anti-slip surface - very sturdy welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN / kg) TÜV certified! - Lashing hooks on lower hinge parts - Maintenance-free rubber spring axle from BPW - Automatic reverse drive - BPW overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large safety lighting - Lighting recessed in rear frame, integrated rear fog light - Automatic center support wheel Accessories optionally available: - High front grille, 70cm - Tarpaulin + bows - Rear light protection grille - Rotating & crankable rear supports - Anti-theft device - Grids, side wall attachments, nets and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bodpfxou Htqhe Adreli

Condition: new, empty load weight: 825 kg, maximum load weight: 1,775 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,420 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, loading space volume: 13.3 m³, color: grey, construction height: 2,670 mm, working width: 2,110 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, New color: Iron Grey, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability:* IMMEDIATELY AVAILABLE * - Number of animals: 2 - Gross vehicle weight: 2.600kg - Unladen weight: 825 kg - Payload: 1,775 kg - Interior dimensions: 328 x 166 x 230 cm (L x W x H) - Overall exterior dimensions: 443 x 211 x 267cm (LxWxH) - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100km/h: Included! - incl. vehicle documents Vehicle body: - Floor: ALUMINIUM floor - Drop sides/body: Anodized double-walled aluminium - Roof material: Full polyester - Tack room: Yes - Tack room equipment: Luggage net, saddle holder can be swung out, make-up mirror, bridle holder, lockable door, door lock - Feed troughs: Yes, recessed in tack room - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 99 to 119cm, adjustable - Distance between stall bars: 172 to 191cm, adjustable - Distance between tack room and breast bar: outside 32cm / with partition wall: 48cm - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Pullmann2 chassis Independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tethering option outside - Tethering option inside - Padded safety stall rail system - Height adjustment for stall rails - Depth adjustment for stall rails - Panic release at the front - Saddle compartment inside with: Swivel saddle holder, net, mirror, bridle holder - High entrance door - Lockable entrance door - Door retainer on entrance door - PVC transparent partition wall - Large windows can be pushed open at the front - 2 additional windows at the side - Rubber glued to the floor and sealed - Hay net hooks - PVC transparent partition wall - Single mudguards, (black) - Interior light at rear - Side pads (2 pieces) - Step protection on side walls (GRP plastic) - Tarpaulin roller blind as net - Maneuvering handle - Lifting device gas pressure shock absorber on tailgate - Step on rear flap - 3rd brake light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap. Third brake light on rear flap - Lighting system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Spare wheel with holder - Spare wheel cover - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Additional interior light - Foal grille - Feeding trough for hanging with holder - Chest bar pad - Box bar continuous, padded (rear) - Full-length, padded stall rail (front) - Wear mat/scratch mat - Video surveillance system incl. reversing camera New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop Bjdpeu Hrrkjfx Adrsli

Condition: new, Wilo Glanded pump IPN50/180-7,5/2 AT, DN50 PN 16, Art. 307833 /2120882 Wilo Glanded pump IPN50/180-7,5/2 AT, DN50 PN 16, 7,5kW max 140 degrees 2900 rpm art. 307833 /2120882 below mentioned data are identical in construction with our predecessor Ordering information Make: Wilo Product designation: CronoLine-IL 50/180-7,5/2 net weight approx. m: 106 kg Order number: 2120882 Operating data: Pumped liquid: Water Medium temperature T: -20 °C Ambient temperature T: -15 °C Maximum operating pressure PN: 16 bar Design pressure: 16 bar up to 120°C, 13 bar up to 140°C Minimum efficiency index (MEI): 0.4 Hydraulic data: Minimum efficiency index (MEI): 0.4 Max. Working pressure p: 16 bar Bljdpfeivdz Nsx Adrei Max. operating pressure PN: 16 bar Min. media temperature Tmin: -20 °C Max. media temperature Media temperature Tmax: 140 °C Max. Ambient temperature Tmax: 40 °C Design information: 16 bar up to 120°C, 13 bar up to 140°C Motor data: Mains connection : 3~400 V, 50 Hz Voltage tolerance : ±10 Motor efficiency class : IE3 Motor rated power P2: 7,50 kW Rated current IN: 13,30 A Rated speed n: 2900 1/min Power factor cos φ: 0.90 Motor efficiency ηM 50%: 88.9 percentage Motor efficiency ηM 75%: 90.3 percentage Motor efficiency ηM 100%: 90.1 percentage Motor winding up to 3 kW: - Motor winding from 4 kW: - Insulation class: F Motor protection class: IP55 motor protection: no Materials: Pump housing: 5.1301/EN-GJL-250 KTL-coated Impeller: EN-GJL-200 (GG-20) cast iron Shaft: stainless steel Mechanical seal: AQ1EGG Lantern: 5.1301/EN-GJL-250 KTL-coated Condition: "New". Pumps from stock. Partly without original carton. May have dirt or storage marks/cl. dents. Unused they look at the holes. There are no fastening traces See pictures Shipping with special/package/shipping P4 More items - new and used - you will find in our store! International shipping costs on request!

Condition: new, maximum load weight: 26,950 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 8,000 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,170 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer SKS Steel Semi-Round Body Tipper 27 m³ | Hardox | Electric Tarpaulin Manufacturer: Kässbohrer Model: SKS B / 27 – 15 / 18 Approval: Germany Condition: New / Built to order ---Body & Specifications * Volume: 27.0 m³ * Perm. gross weight: 33,000 kg Blodpfox I Twfox Adrsi * Unladen weight: approx. 6,050 kg * Body length: 8,000 mm * Total length: 9,030 mm * Width: 2,550 mm * Height: 3,170 mm * Fifth wheel height: 1,220 mm ---Body & Material * Steel semi-round body made from Hardox / HB450 * Sheet thicknesses: - Floor: 5 mm - Sides: 4 mm - Front & rear: 4 mm * Rear end flap, mud-resistant, with rubber seal and bolt fasteners * Additional mechanical rear flap * 5-stage HYVA tipping cylinder (250 bar) * Automatic safety brake when the body is raised * Tilting warning system for excessive incline ---Electric Tarpaulin / Cover System * Electric tarpaulin system (650 g/m²) * Operation via button on vehicle and via remote control * Tarpaulin complies with fire protection ISO 3795 * Colour: RAL 3002 Carmine Red ---Chassis & Technology * High-strength S700 MC steel chassis * KTL coating – 10 years corrosion protection * 2 BPW axles with disc brakes (9 t each) * Lift axle, can be controlled automatically & manually * WABCO EBS 2S/2M with ABS & RSS * Electronic air suspension * WABCO Smartboard (axle load, brakes, tires, error display) ---Tyres * 385/65 R22.5 * Premium EU tires * Steel rims * M+S tires * Mudguards & splash guards matching tyres ---Electrics & Safety * ASPÖCK Europoint III LED lighting * Rear LED work lights * Side underrun protection in aluminium * Rear underrun protection in steel (ECE R58.3) * Tire pressure monitoring system (TPMS) ---Additional Equipment * Body-Fix system (reduces vibration & noise) * Aluminium access ladder * Document box at the front * Kässbohrer logos on sides & rear * Couplings: Yellow / Red ---Colours * Chassis: MB 7350 Novagrau * Body: RAL 9005 Jet Black * Tarpaulin: RAL 3002 Carmine Red

Condition: new, machine/vehicle number: 003, empty load weight: 2,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, Year of construction: 2026, Equipment: ABS, Kögel Combi interchangeable semi-trailer; - New vehicle - turntable - GVWR 18,000 kg - for a parking height of 1220-1320 mm - unladen driving height 1255 mm - 40 mm drawbar eye - BPW axles, 2x9 tons, disc brakes, ET 120 (partially also with SAF axles) - lifting and lowering - tire size 385/-, choice of manufacturer - optionally also with 385/55 tires - ABS-EBS - warning signs ECE-R70, 2 pcs. - Kögel KTL system, corrosion-protected (Nano Ceramic) Prices are quoted excluding 19% VAT, ex works. Offer is subject to change, errors and omissions excepted, and subject to prior sale. Blodpjg Dkwrsfx Adroi Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 273.00 per month, plus 19% VAT. We are available to answer any questions you may have at any time. Images are for demonstration purposes only and may show optional equipment that incurs an additional charge.

Condition: new, machine/vehicle number: 002, overall weight: 18,000 kg, tire size: 445/45r19.5, color: black, Year of construction: 2026, Equipment: ABS, center pivot plate, Krone interchangeable semi-trailer, type AZW 18 eL3B7; - New vehicle - turntable - GVWR 18,000 kg - for parking height 1020-1320 mm - unladen driving height 1080 mm - 40 mm drawbar eye Bedpfx Ajg Dkwvedrjli - BPW axles 2x9 tons, disc brakes, offset 120 - lifting and lowering - tire size 445, customer's choice of manufacturer - alternatively also available with 435/ - E-wheel holder - ABS-EBS - KTL primed and powder-coated, deep black Prices are quoted excluding 19% VAT, ex works. Offer is subject to change, errors and omissions excepted, and subject to prior sale. Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 294.00 per month, plus 19% VAT. We are available to answer any questions you may have at any time. Images are for demonstration purposes and may show optional equipment that is subject to an additional charge.

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer Bjdpfxewx Dbio Adrsli * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm Blodpfow U H Sbjx Adrji * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, Year of construction: 2026, color: white, overall weight: 16,000 kg, empty load weight: 2,350 kg, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,510 mm, machine/vehicle number: Swap, Kögel SWAP swap body / sliding tarpaulin; - New vehicle - GVW 16,000 kg, payload approx. 13,600 kg - Side loading height approx. 2,430 mm (also available as a Midi version with approx. 2,680 mm, at an extra cost) - Height under the roof approx. 2,510 mm (in the Midi version approx. 2,780 mm) - Parking height according to DIN EN 284, approx. 1,320 mm - Type C745 - 4x support legs 1020-1320 mm - Rear access ladder - 30 mm thick platform floor - Quick-release system at the front and rear for side tarpaulin - Certificate for load securing according to EN 12642 XL (VDI 2700) - Double-wing rear door, approx. 2,480 mm Blsdpfx Adohmiywjrei - Sliding guides on the side - 3 rows of V-shaped aluminum lashing rails on the side - Vario-Fix steel outer frame with 1 pair of rail supports - 9 pairs of lashing points according to EN 12640, permissible tensile force 2,500 kg per ring - Sliding tarpaulin cover, movable to the front - 1 pair of steel impact buffers 160x85x85 mm - Tarpaulin rope with 2 holders on the front wall - Sliding tarpaulin, approx. 900 g/m² with over-center tensioning system - Frame, chassis and components Kögel KTL system - Tarpaulin color white (also available in silver) - Frame and components in deep black RAL 9005 Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 254.00 per month plus 19% VAT. Offer is subject to change, errors and omissions excepted, intermediate sale reserved, prices are valid ex works. Please inquire about the current delivery time. We are always happy to answer any questions you may have. Images are for demonstration purposes only and may show optional extras at an additional cost. Digital lettering is available at an extra cost!

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, tire size: 385/55r22.5, Year of construction: 2026, Equipment: ABS, Krone interchangeable trailer, type ZZW 18 eLE10; - New vehicle - tandem axle - GVWR 18,000 kg - for coupling height 1070-1320 mm - unladen ride height 1090 mm - 50 mm drawbar eye, extendable 4x100 mm - BPW axles, 2x9 tons, disc brakes, offset 120 (partially also with SAF axles) - lifting and lowering - tire size 385/ Krone Easy Rider - alternatively also with 435 or 445 tires - electric wheel chocks - ABS-EBS - warning signs ECE-R70, 2 pieces Bljdpfx Asg Dkwnodroi - KTL primed and powder-coated, deep black Prices are quoted excluding 19% VAT, ex works. Offer is subject to change; errors, modifications, and prior sale are reserved. Leasing/financing/hire purchase is possible, subject to credit check. Leasing from EUR 344.00 per month plus 19% VAT. We are available to answer any questions you may have at any time. Images are for demonstration purposes only and may show optional extras at an additional cost.

Condition: new, machine/vehicle number: 001, empty load weight: 2,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, tire size: 385/65r22.5, Year of construction: 2026, Equipment: ABS, center pivot plate, Krone interchangeable trailer, type AZW 18 eL3B9; - New vehicle - Turntable - GVWR 18,000 kg - for coupling height 1220-1320 mm - unladen ride height 1255 mm - 40 mm drawbar eye Bodpfxsg Dkwyo Adrsli - BPW axles 2x9 tons, disc brakes, offset 120 (partially also with Krone axles) - lifting and lowering - tire size 385/ Krone Easy Rider - optionally also with 385/55 tires - E-wheel holder - ABS-EBS - warning signs ECE-R70, 2 pieces - KTL primed and powder-coated, deep black Prices are quoted plus 19% VAT, ex-works. Offer is subject to change, errors, modifications and prior sale reserved. Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 259.00 per month plus 19% VAT. We are available to answer any questions at any time. Images are for demonstration purposes and may show optional extras that incur additional costs.