Used Krause for sale (89)

Condition: used, machine/vehicle number: 101073, Universelle Stanzmaschine - Punching machine Krause 101073Serial-No. 101073 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bjdpfoh Axmijx Aafolc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 20048, Spindelpresse - Spindle Press Krause SP-SPressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video Bjdpsh Ayiaofx Aafelc We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19163, Pappschere / Board Cutter Krause 140/72cmSchnittlänge / Cutting Length 140cm Tischbreite / Table width 72cm Auffang- tisch, Fußpressung Vorderan- schlag mit Schmalschneider vordere Anlegeleiste mit darauf verschiebbarem Anlege- winkel Maßskalen in mm-Teilung Gewicht/ Weight 420 kg Online-Video-Inspection by Skype-Video Bodpfx Aajh Szf Eofolc We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Bledpfx Aajvfx Ulefec Format: 600 x 500 mm Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: used, Format: 0x0 Bodpfx Ajx Rh D Eeafslc Equipment: Corner cutter

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm Bedpfox N I Hwox Aafslc

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. The work table is moveable. The device was purchased from a school workshop and has not been used in production. Blodpfex N Dxvjx Aafec Power supply: 230V Heating plate size: 400x275mm. Weight: approx. 600kg.

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem Bljdpjxb Ucaofx Aafoc No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: used, Punching machine for, e.g., slipcases with many punching dies Blsdpfxexw N Nto Aafsc

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) Bledsri Sicjpfx Aafjc - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Sale of a container conveyor system with a pick-by-light system. The conveyor system extends over several sections and partial circuits (loops) over which the containers are transported. Year of construction and modifications during the years: 2007 Built by Hörmann Logistik 2016 Conversion of Loop 3 (complete renewal of the conveyor system, rollers, and control system) by Förster & Krause 2020 Complete renewal of the Pick By Light system by KBS 2021 Conversion of Loop 2 (complete renewal of the conveyor system, rollers, and control system) by Förster & Krause Loop 1 (Partial Loop 1 Conveyor System) - Main Loop - 2 stations for the adjacent floor storage area for storing full pallets - One lane for containers identified as non-conforming after inspection - A total of 20 empty containers are in circulation simultaneously Loop 2 (Partial Loop 2 Conveyor System) - 3 stations for push-through racks - 15 empty containers are in circulation simultaneously - Dimensions approx. 4m x 38m Loop 3 (Partial Loop 3 Conveyor System) - 2 stations For push-through racks Bodpowa Tgqefx Aafjlc - 15 empty containers in circulation simultaneously - Dimensions approx. 4m x 35m This is followed by 12 packing stations where the containers can be processed. From here, the packaged goods are packed into cartons and routed to 4 shipping lanes. Containers: The portfolio includes a total of 150 containers measuring 60x40x28cm. Pick By Light: KBS Pick By Light PTF series 7 zone displays 900 compartment displays 2 controllers/interfaces Terms of Sale: § 1 Subject of the Contract As already described, a container conveyor system and the Pick By Light system are offered for sale. The buyer acknowledges that this is a used system. § 2 Purchase Price The purchase price is negotiable. VAT is deductible. § 3 Collection The buyer undertakes to dismantle the system at the seller's location, namely the site, at his own expense and responsibility. The dismantling of the system will take place at a time agreed upon between the parties, at least in writing. The agreed time must be chosen so as not to disrupt the seller's general business operations. The seller will grant the buyer access to the premises to dismantle the system, provided that all safety and access regulations of the seller are observed by the buyer. The risk of accidental loss shall pass to the buyer upon handover at the site. Handover shall take place at the latest when the buyer begins to dismantle the system independently. § 4 Warranty and Liability The buyer purchases the system as seen. The seller excludes any warranty or liability, regardless of the legal nature of the asserted claim, unless a guarantee has been given for the quality of the goods or a defect has been fraudulently concealed. This exclusion does not apply to claims for damages – regardless of the legal basis – if the seller, its legal representatives, or vicarious agents have breached their obligations through gross negligence or intent, nor to the mandatory liability without fault, e.g., under the Product Liability Act. § 5 Retention of Title Ownership of the contractual items remains with the seller until the purchase price has been paid in full.

Condition: good (used), Size max: 430 x 300 mm Bodpfx Aod Tnh Esafjlc Book thickness: max 60 mm Speed max: 6000 c/h Height: 1400 mm Width: 1600 mm Depth: 900 mm Weight: 560 kg (approx.)

Condition: ready for operation (used), Year of construction: 2003, A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible. Bodevtqq Ujpfx Aafslc

Condition: good (used), Year of construction: 1969, machine/vehicle number: 317594, cutting width (max.): 1,380 mm, Cardboard rotary board cutting machine, in working condition, new knives,... Blodsv A Rzlopfx Aafjc

Condition: used, Year of construction: 2013, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Blsdox N Nc Hspfx Aafoc Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Krauss Maffei Motherboard Bljdpfsu Axihsx Aafjc

Condition: new, It is new spare parts never used. Krauss Maffei MC 5 display M5V121 new never used Was bought for Krauss Maffei 2300 ton machine. M5-Anzeigeeinheit 12Z LxWxH 310x 360x60 mm 3600 g Bledpfx Aasygucfjfec

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- Blsdpfxeqvuicj Aafjc 37 cm height-47cm length-8cm

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit Bodpfx Ajyfm Ahsafslc 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator Bsdpfjx H Au Rex Aafolc English, French, Czech language available. Hours: 61000

Condition: good (used), Year of construction: 2014, clamping force: 11,500 kN, Equipment: documentation/manual, MC6 controll panel Blue power Bsdsyfgx Aspfx Aafelc Clamping force: 1150 t Tie bar distance HxV: 1580x1280 mm Screw diameter: 90 mm Shot weight: 2084 g Shot volume: 2290 cm3 Type: Horizontal Drive: Hydraulic

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 Bedpeyffcajfx Aafslc • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm Bljdpfeydnp Hex Aafec • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Year of construction: 2016, operating hours: 32,000 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, screw diameter: 45 mm, This Krauss Maffei KME 45 XS was manufactured in 2016. It features a 45 mm screw diameter, high-performance single screw with a 36:1 L/D ratio, and operates at speeds up to 600 rpm. Designed for high-pressure extrusion, it handles thermoplastics and compounds with a throughput of 150-300 kg/h. Consider the opportunity to buy this Krauss Maffei KME 45 XS single screw extruder. Contact us for more information about this machine. • Extruder type: Single-screw Blsdpfxjycvfts Aafoc • L/D ratio: approx. 36:1 (XS = high-performance series) • Screw speed: up to approx. 600 rpm • Drive: AC motor with frequency control; high-torque design for compounding • Throughput: approx. 150–300 kg/h (depending on material and screw configuration) • Operating pressure: High-pressure extrusion capable • Material types: Thermoplastics, compounds, masterbatch • Motor upgrade in 2023 : The original motor was replaced in 2023 to increase the torque on the screw. The replacement was carried out by Krauss ken converter (price offer available)

Year of construction: 2001, condition: ready for operation (used), This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information. Machine Benefits Technical Machine Benefits • Screw diameter: 50 mm/ max. Pressure: 1521 bar / max. Injection volume: 340 cm³ Bjdpfx Aoyary Uoafolc • Euromap interface: 12 / hydraulic units: 1 / air units: 1 / hot nozzle zones: 1