Used Kramer 680 for sale (73)

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Nwedjyttv Ropfx Ad Sjh

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Nedpofnabyefx Ad Sowh Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Nwsdpfx Asxl Elgsd Soh

Condition: good (used), 4/3 directional valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Krämer Grebe Control block from Tiromat 3000/430 vacuum packaging system Nwjdpfehvfzcox Ad Ssh -Valves: PMV-D 40/40 BL / PMV-D 25/32-BL / BVB-S 25/40 -Individual components: see photos -Overall dimensions: 500/460/H190 mm -Weight: 19 kg

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Kramer Grebe Conveyor belt from vacuum packaging system Tiromat 3000/430 -Strap width: 370 mm -Conveyor length: approx. 830 mm Nodehwgd Hepfx Ad Sowh -Conveyor belt: adjustable in height, without drive -Transport dimension: 830/425/H545 mm -Weight: 28 kg

Condition: good (used), Year of construction: 1988, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan Nwedswrb Srspfx Ad Ssh -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: Dunkermotoren, gear motor from vacuum packaging system Tiromat 3000/430 -Type: DR 62.0 x 80-2 i= 50:1 -Motor: 0.089 kW 2500 rpm -Gear: 50 rpm -Shaft: Ø 14 x 25 mm -Number: 2x gear motor available Nwsdpfx Adohv S Eao Seh -Price per piece -Dimensions: 260/130/H120 mm -Weight: 4 kg/pc.

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Zebotronics servo motor stepper motor from vacuum packaging system Tiromat 3000/430 -Type SM 87.3.18.M7 -Shaft: Ø 10 x 30 mm -Number: 1x stepper motors available Nsdpfx Ajhwgd Ujd Sjwh -Dimensions: 175/85/H110 mm -Weight: 3.7 kg

Condition: excellent (used), Side tipping bucket, wheel loader bucket, earth shovel Nwjdpettc S Refx Ad Sjh -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth -Dimensions: 760/1650/H770 mm -Weight: 240kg -Own weight: 480 kg

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve Njdpfxjhvfzrj Ad Sewh -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: PMV-D 25/32 BL / PMV-D 40/40 BL -Individual components: see photos -Total dimensions: 440/380/H230 mm -Weight: 11.3kg

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm Njdpfx Ashuf Itod Sewh -Weight: 13.5 kg

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Valves: airtec MS 01 / airtec MO 04 310-HN -Valves: IWN PMV-D 40/40-BL / PMV-D 25/32-BL / BVB-S 25/40-1 -Individual components: see photos Nwodpfohuf Ihjx Ad Ssh -Total dimensions: 500/420/H185 mm -Weight: 18,7 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor Nsdshwgdxspfx Ad Sowh -Manufacturer: Oriental Motor, Vexta servomotor stepper motor from Tiromat 3000/430 vacuum packaging system -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price: per piece -Dimensions: 97/57/H57 mm -Weight: 0.2 kg/pc.

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Njdpfxjvaatfo Ad Sswh Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm Nwodpfxsvaar Ie Ad Seh - Working width: approx. 105 cm

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Nedjpgnftopfx Ad Sowh Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: good (used), The KRÄMER+GREBE TMG 1500/200 mixing grinder is a professional stainless steel machine designed for industrial meat processing. It is ideal for grinding and mixing both fresh and partially frozen meat. Mixing Grinder CFS – KRÄMER+GREBE TMG 1500/200 Manufacturer: CFS – KRÄMER+GREBE Model: TMG 1500/200 Year of Manufacture: 1998 Machine Number: 371/0109 CE Certification: Yes Machine Features: Mixing tank capacity: approx. 1500 liters Processing capacity: Fresh meat: approx. 800-900 kg Partially frozen meat: approx. 700-750 kg Meat grinder throat diameter: 200 mm Main motor power for grinder: 45 kW (1 speed) Nsdpsumlibjfx Ad Sjwh Screw speed: 160/320 min⁻¹ Main motor power for mixer: 7.5/11 kW (2 speeds) Mixing paddle speed: 16/32 min⁻¹ Additional Equipment: Pneumatic sorting device Pneumatic discharge flap for mixer Stainless steel base Integrated loading for 200-liter wagons Application: This mixing grinder is ideal for meat processing plants that require efficient and reliable machinery for grinding and mixing large quantities of meat. Machine Benefits: High performance when processing both fresh and partially frozen meat. Durable stainless steel construction ensures longevity and easy maintenance. Adjustable mixing and grinding speeds allow customization of settings to meet various production needs. Integrated pneumatic systems provide smooth and efficient operation.

Condition: excellent (used), Height 360 cm Length 240 cm Nedpfx Adjrt Tt De Sswh Width 220 cm 2.5 kW motor 4,800 m³h

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, total length: 1,250 mm, total width: 900 mm, total height: 1,150 mm, input voltage: 380 V, power: 10 kW (13.60 HP), Kramer Grebe WW130 1985 year 2 speeds - 10kW and 15kW 380V 50Hz Nwjdpfx Adjx Dy Nqo Seh 125 cm x 90 cm x 115 cm Entirely stainless steel, stainless steel screws, includes a set of knives and nets. Machine refurbished in 2025

Condition: good (used), Year of construction: 1991, Krämer + Grebe WW 200 Meat Grinder Manufacturer: Krämer + Grebe GmbH & Co. KG Model: WW 200 Machine number: 281/141 Year of manufacture: 1991 Plate diameter: 200 mm Power supply: 380 V, 50 Hz Current: 91 A Nwodpfex I Ny Ajx Ad Sjh Dimensions: 1900 × 1800 × 2250 mm Condition: incomplete – knives and plates are missing The Krämer + Grebe WW 200 industrial meat grinder is a robust machine designed for grinding raw meat and product blocks in medium and large food processing plants, particularly in meat or cheese production. The machine is constructed from stainless steel, ensuring a high level of hygiene and easy cleaning. The 200 mm throat diameter enables efficient product loading and preparation for further processing stages.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Krämer + Grebe SC-WW Meat Grinder Manufacturer: Krämer + Grebe Type / Model: SC-WW Machine number: 282/118 Year of manufacture: 1991 Power supply: 380 V, 3 phases, 50 Hz Current draw: 117 / 160 A Cutting plate diameter: 200 mm Overall dimensions: 1750 × 1350 × 2550 mm The Krämer + Grebe SC-WW industrial meat grinder is a robust and durable machine designed for heavy-duty use in meat processing plants. Equipped with a high-performance working chamber and a 200 mm cutting plate, it ensures efficient and uniform mincing of even highly chilled meat. The machine is ideal for large-scale production, delivering stable operation, high repeatability, and safety in technological processes. Nodex E Dqqjpfx Ad Sjwh

Condition: used, power: 110 kW (149.56 HP), Year of construction: 2018, operating hours: 4,800 h,

Condition: like new (used), The Kramer + Grebe SM 200 cutter (also known as a bowl cutter) is an industrial machine mainly used in the meat industry for cutting, mixing, and emulsifying meat and other ingredients. Main function: Nwodsx S Ih Topfx Ad Seh - It features a bowl with an approximate capacity of 200 litres. - The blades rotate at high speeds to cut meat, fat, ice, spices, etc. - Cutting while the bowl rotates produces a fine emulsion, resulting in a homogeneous texture in products such as sausages, pâtés, frankfurters, and more.