Used Keyless Drill Chuck for sale (8,935)

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AX 3/S, drilling capacity in steel 40 mm, spindle speeds: 160-2250 rpm, short spindle MK3, spindle stroke: 120 mm, overhang: 293 mm, column diameter: 115 mm, machine table usable support surface: 514 x 360 mm, with T-slots 2 x 14 mm x 224 mm, distance spindle-table min./max. 117/701 mm, machine table height adjustment via hand crank, machine height without options: 1840 mm, net weight: 260 kg. Standard equipment: Main switch with locking mechanism Motor with thermal protection contact Mushroom push button (latching) for EMERGENCY STOP Speed adjustment, stepless Crsdpfx Asz E Sqyoiiei Spindle guard with electrical protection Main switch Right and left rotation Protection class IP 54 Motor insulation class "F" (155°) Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Digital drilling depth display Zero point setting (drilling start) 5-digit LED display, character height 13 mm, item no. 37.1 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment.

Condition: refurbished (used), Year of construction: 1991, Work table 750 mm x 1200 mm Outrigger travel distance 1000 mm Tool holder MK 4 Drilling capacity 32 mm in steel Threading device Csdpfxez S Tzzj Aiiori Coolant system Documentation

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Version • Work table 1200 x 600 mm with 4T-slots • Ram travel 750 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Protective device • USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance Spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance Spindle bottom edge - min mm 970 Ground max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Machining values Drilling capacity in steel St 60  40 Cast iron GG 22  50 Thread cutting Steel St 60 M 36 Cast iron GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Credpfx Aiez S T A Esiei Feed drives X-axis - AC - Servo motor kW 0.25 Y-axis - AC - Servo motor kW 0.25 Z-axis - AC - Servo motor kW 4.50 W-axis - AC - Servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Feed rates, stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis on 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easily readable from all sides, 215 x 160 mm Position data: Cartesian or polar, dimensions absolute or incremental, Unit: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to Machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Machining cycles Standard software options: Programming in dialog, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted start Zero point determination: Cycles to determine zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning castings and forged parts - Angle detection in round parts by probing reference edges or surfaces Test graphic Graphical display of drilling patterns

Condition: good (used), functionality: fully functional, Drilling capacity in ST 60: 50 mm 8 gear stages: 67 – 750 rpm Spindle motor: 2.5 / 3.3 kW 4 drilling feed rates: 0.1 / 0.2 / 0.3 / 0.40 mm/rev Overhang, approx.: 355 mm Table surface: 500 x 620 mm (measured without edge) Codez S U R Djpfx Aiieri Spindle stroke: 250 mm Taper: MK 5

Condition: excellent (used), Professional paper drilling machine from the renowned German manufacturer Constantin Hang Maschinenfabrik Göppingen. Model 114-4 is equipped with four drilling heads designed for precise drilling of paper, documents, catalogs, calendars, and print materials. The machine is suitable for use in: • printing houses, • bookbinding shops, • print production facilities, • binder and catalog manufacturing, • technical documentation preparation. Robust German engineering guarantees high working precision and long-term durability. Technical specifications: Codpfx Aioz Smzpeijri • Manufacturer: Constantin Hang Maschinenfabrik • Model: 114-4 • Number of heads: 4 • Adjustable head distance • Adjustable worktable • Foot pedal operation • Safety guard • Made in Germany

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank Csdpoz Sm Hrofx Aiijri The item being sold is exactly the one shown in the pictures.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 1,500 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, A used, well-maintained, CNC-controlled drilling and tapping machine with a moving column, equipped for drilling, countersinking, and thread cutting, featuring: - 7-position tool changer - Micro-spray system Cedpoz S Rfdjfx Aiiori - Internal coolant supply - Automatic tool length measurement - 5 pneumatic clamping cylinders - Documentation - Programming guide Drilling capacity in steel ST60: up to a diameter of 40 mm without pre-drilling Thread cutting in ST60: up to M30 Spindle speeds: 50-1500, freely programmable Tool holder: BT40 Travel distances X/Y/Z: 6000/650/400 mm Feeds: 0.01 to 1.5 mm/rev Rapid traverse speed in X/Y/Z: 18/8/5 m/min Technical data and dimensions subject to change.

Condition: as good as new (ex-display), functionality: fully functional, A very nice paper drill is for sale (like new). Type 290, with 2 drilling heads and a sliding table, 230 volts. Powerful motor. User-friendly. Csdpfjz N Ag Ijx Aiiori You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TL 4 is a highly stable, T-frame machining center with a large rotary table and a large working area. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Its advantages: Codpfoq I Nlyox Aiisri ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase Technical features: Control system: • HEIDENHAIN TNC 7 digital path control • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position drum magazine with dual gripper Chip removal: Double-hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us; we will be happy to advise you and create a customized offer.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, EXCELLENT CONDITION Crsdps Adqk Nsfx Aiisi

Condition: excellent (used), Twist drills and taps grinder from 1,5 to 25 mm CUOGHI model APE 25 Cedpfjyzpf Sjx Aiisri

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW Csdju Nm Nispfx Aiijri - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Cedjz Rwpyopfx Aiiori Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm arm length 1230 mm bore stroke 180 mm total power requirement 3 kW weight of the machine ca. 1,8 t Csdpfx Aie Aa A E Roiori dimensions of the machine ca. 2,2 x 1,8 x2,3 m High-speed radial drilling machines with: - Feed mechanism - Thread-cutting attachment

Condition: used, operating hours: 6,302 h, machine/vehicle number: LLA01169, fuel type: diesel, motor manufacturer: Caterpillar 3512C, General information Year of manufacture: 2008 Field of application: Construction Weights Crodpfxe Aa H Agj Aiisi Empty weight: 43.000 kg Functional Generator capacity: 1.421 kVA Dimensions of cargo space: 1310 x 300 x 326 cm Other information Fuel consumption: 205 Liter per Hour at 75% Load Generator: Kato AA27675008 Frequency: 60 Voltage: 600 Drill equipment: Control Panel, Steel canopy Production country: US Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Steel canopy

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. Cjdpfx Aijz Nyvysieri CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 145 mm, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 0, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: ISO40, spindle diameter: 72 mm, nominal power: 3 kW (4.08 HP), Milling-/Drilling Machine, DRO, drilling capacity Ø 40 mm, motor 2,2/3,0 KW, table size 800x225 mm, spindle speed 32-3240 rpm stepless, ISO40, pneum. tollclamping el. tapping device, table stroke X/Y 585/240 mm, automatic spindle feed, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Cedpfx Ajz Rqfzjiiori

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 230 mm, travel distance Y-axis: 150 mm, spindle speed (max.): 3,300 rpm, spindle speed (min.): 320 rpm, spindle mount: MK 2, throat depth: 182 mm, quill stroke: 80 mm, type of input current: three-phase, total length: 650 mm, total height: 900 mm, table width: 152 mm, input voltage: 400 V, total width: 580 mm, table length: 420 mm, drilling capacity: 16 mm, Equipment: documentation/manual, NEW MTP ZX7016 400V DRO drill-milling machine "Zośka" with digital depth readout + vice – 400 V – 12 months warranty on parts – delivery to any destination in Europe The Metal Technics Polska ZX7016 is a compact 2-in-1 drill-milling machine for drilling and light milling in metal. Compact dimensions, simple operation and a solid construction make it ideal for workshops, garages, service departments and hobby metalworking. A true classic, known for its excellent value for money. This version adds a digital depth readout panel with zero-reset function: it shows the vertical travel of the tool in millimetres, so you can set a reference point, reset to zero and drill or mill to an exact depth – and repeat settings easily, without guessing. TECHNICAL DATA • Spindle taper: MT2 • Max. drilling diameter: 16 mm • Max. face milling diameter: 40 mm • Max. end milling diameter: 10 mm • Spindle speeds: 320–3300 rpm (12 speeds) • Spindle stroke: 80 mm • Table size: 420 x 152 mm Cjdoz Hz U Rspfx Aiiori • Table travel: 230 x 150 mm • Spindle to column: 182 mm • Spindle to table: 360 mm • Dimensions with base: 650 x 580 x 900 mm • Weight: approx. 100 kg (packed: 68 × 58 × 77 cm) • Motor: 550 W • Voltage: 400 V / 50 Hz, three-phase STANDARD EQUIPMENT • Cross table with handwheels • Machine vice • Digital depth readout panel with zero reset • Drill chuck with chuck guard • 12-speed belt drive WARRANTY & DELIVERY • 12 months warranty on parts • Delivery to any destination in Europe – shipping cost calculated upon request • Price: EUR 415 net (excl. VAT) We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Condition: good (used), travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, type of input current: three-phase, table length: 600 mm, workpiece length (max.): 400 mm, Fast-Hole EDM Brand: Tecnosystem Model: D3-DM FAGOR 3-Axis NV 300E Coordinate Display Travel: - X-axis: 350mm - Y-axis: 250mm - Z-axis: 350mm Electrode rotation speed: 200 rpm Head travel: 200mm Table dimensions: 600x300mm Maximum workpiece weight: 200kg Dielectric fluid capacity: 200L Drilling capacity: Drill/electrode diameters from 0.3mm to 6.3mm. Maximum electrode length: 400mm Weight: 800kg Crsdpfxjz Dt Uko Aiisi The Tecnosystem D3-CM is a fast-hole EDM machine (or EDM drilling machine/super-drilling machine). In machining workshops, it is commonly used as auxiliary equipment for wire cutting to create the initial holes through which the cutting wire is subsequently passed. Function: Fast drilling using an electric arc on conductive materials (hardened steels, etc.) using rotating tubular electrodes made of brass or copper. Key applications: Drilling threading holes for EDM wire, extracting broken taps, and creating small cooling or ejection holes in molds and dies. System: High-pressure injection of dielectric fluid through the tubular electrode.

Condition: excellent (used), Year of construction: 2000, Description to follow! Cjdpfjz Ebqpjx Aiisri

Condition: used, used, refurbished, 24V-magnetic chucks (flat and sinetable) with and w/o water-cooling in dimensions - 400 x 150 mm - 500 x 200 mm - 600 x 250 mm new wire and plug subject to prior sale Cedpfx Aoc Szv Dsiijri

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Mounting: Long taper, diameter 80 mm with external thread 125 x 3 mm Crsdpfofimg Hjx Aiisi Keyway 10 mm Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated.

Condition: excellent (used), Year of construction: 2012, Four-jaw chuck Crodpfofklf Uex Aiioi Manufacturer: Röhm Diameter: 315 mm Bolt circle: 120 mm Individually adjustable jaws Centering bore: 120 mm Pitch: 625/4 threads per inch

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V Csdpfxsfv H Hqj Aiiori total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V Crodpfxjfv H Hus Aiioi diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.