Used Jointer Thicknesser for sale (315)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, power: 4 kW (5.44 HP), number of blades: 4, total length of planing tables: 2,400 mm, Planing width 510 mm Planing height 240 mm Total table length 2400 mm Motor power 4 kW Feed speed 7+14 m/min 4-knife TERSA cutterblock Table-integrated retractable roller guides Motorized thickness table height adjustment Fine adjustment via handwheel Gjdpfjymwggex Af Ujbi Aluminium fence with auxiliary stop

Condition: ready for operation (used), Thicknesser SAC RS53 4 knives Specification: • working width - 530 mm • working height - 240 mm • 5.0 kW engine • 4-knife shaft for traditional knives • analog thickness indicator • 2 feed speeds • full, straight pulling shaft in front of the planing shaft • two steel outgoing rollers behind the planing shaft • sliding roller in the lower table • manual up/down adjustment • table supported by 1 solid piston • original painting • sawdust extraction outlet fi 140 mm • weight approx. 800 kg • dimensions 92 x 100 x 160 cm (length x width x height) Gjdewgdghepfx Af Usbi Additional information: • the photos show the actual condition of the item for sale • the device can be switched on and checked on site.

Condition: good (used), functionality: fully functional, planing width: 530 mm, total width: 1,000 mm, total height: 1,050 mm, overall weight: 600 kg, total length: 2,740 mm, working width: 530 mm, chip removal: 150 mm, planer shaft diameter: 120 mm, table length: 2,740 mm, Planer, thicknesser STETON PF 530 E Specification: • Condition - used • Manufacturer - STETON • Model - PF 530 E • Working width - 530 mm • Table length - 2740 mm • Adjustable fence (angle adjustable) • Motor power - 4.0 kW • Spindle speed - 5000 rpm • Chip thickness indicator • Max cutting depth - 8 mm • Electrically adjustable planing height from control panel • Noise reduction fingers at the shaft • Motor brake • 4-knife shaft, diameter 120 mm, for Tersa knife system • Start - star-delta • Outlet for chip extraction - diameter 150 mm • Weight - approx. 600 kg • Overall dimensions - 274 x 100 x 105 cm (L x W x H) Additional information: Gbjdpfx Afextdxbs Uoi • Very good technical condition • The attached photos show the actual state of the item for sale • Possibility to switch on and test the machine on site.

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Gedpoxdxk Tofx Af Usbi Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: good (used), functionality: fully functional, planing width: 250 mm, total width: 540 mm, total height: 540 mm, total length: 1,100 mm, Planer, planer 250 mm Specification: • condition - used • max working width - 250 mm • length of tops - 1100 mm • manual setting of tops • 3-knife shaft for traditional knives • start-up 0-1 • culaga dimensions 40 x 6 cm • overall dimensions 110 x 54 x 50 cm (length x width x height) Additional information: Godpfxewbpu Tj Af Uobi • very good technical and visual condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: like new (used), Year of construction: 2014, functionality: fully functional, planing width: 630 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total width: 1,200 mm, total height: 1,100 mm, overall weight: 1,050 kg, working width: 630 mm, spindle diameter: 120 mm, workpiece width (max.): 630 mm, workpiece height (max.): 300 mm, height adjustment type: electric, number of feed rollers: 2, planing height: 300 mm, working height: 300 mm, Equipment: CE marking, documentation/manual, SCM SP2 S63 Thickness Planer | 630 Planer | Planing Height 300mm | LIKE NEW! THICKNESS PLANER FROM ITALIAN BRAND SCM Machine in excellent technical and visual condition, ready for work. The machine operates very quietly. Technical parameters: - cutter block width: 630 mm - maximum planing height: 300 mm - 4-knife TERSA cutter block - spindle speed: 4500 RPM - power: 7.5kW - electric table height adjustment - stepless feed speed adjustment: 5-18 m/min - anti-kickback fingers row - cutter block guard - 2 table rollers Planer dimensions: - length: 1300mm Gbsdpfxoxwd R Ss Af Uei - width: 1200mm - height: 1100mm - weight: ~1050kg Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE, POLAND Possibility to test the machine on site Machine financing available via leasing or installments. WE ORGANIZE TRANSPORT jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Condition: used, Used machine Equipment and technical data: Gbjdpfxjykcymo Af Usi - Planer table width: 410 mm - Planer table length: 2,650 mm - Cutterblock: 4x strip planer knives - Motor: 3 kW - Planer fence adjustable up to 45° Machine does not have a motor brake and can therefore only be sold for spare parts! Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Gjdpfeykaqcsx Af Usbi Shipping possible at extra cost!

Condition: excellent (used), Catalogue number: 7776 TECHNICAL DATA - Shaft width: 520 mm - 4-knife cutter block - Noise-reducing comb - Shaft guard - Table length: 3010 mm - Longer, electrically adjustable infeed table: 1770 mm - Cast-iron tables - Both tables adjustable - Original cast-iron fence, angle adjustable - Electric brake - Extractor connection diameter: 120 mm - Motor: 4 kW - Dimensions (L/W/H): 3010x1000x1400 mm - Weight: 870 kg ADVANTAGES - Italian production - 4-knife cutter block - Overhead control panel - Electric brake - Noise-reducing comb Gbedpoyi Twmsfx Af Uoi - Longer infeed table - Not repainted - Used surface planer, very good condition, original DTR documentation, CE Net price: 28,900 PLN Net price: 6,880 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg Gbodpfeyi Tn Ssx Af Uji ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 2005, functionality: fully functional, input frequency: 50 Hz, overall weight: 7,720 kg, planer-thicknesser combination & thickness planer SCM - MiniMax-Formula FS1 Gbodpfxjyl Snie Af Uei

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm The infeed table is adjusted via a parallelogram mechanism Both jointer tables feature noise-reducing table lips Precision bearing cutterhead with reversible knives Thicknessing table with centrally guided column and support Adjustable spirally serrated feed roller for optimum planing results Technical data: Jointer width: 410 mm Table length: 1800 mm Table height: 850 mm Gbjdjwzzyuspfx Af Uji Cutterhead speed: 4500 rpm 4-knife cutterhead Cutterhead diameter: 100 mm Jointer fence tiltable: 90 - 45° Max. cutting depth: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Workpiece clearance min./max.: 3 - 225 mm Max. cutting depth: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space required: 1800 x 850 mm Availability: short notice Location: Röllbach

Condition: good (used), For sale is a used Panhans surface and thickness planer, type 445/421, with a maximum planing height of up to 220 mm. The machine is in good condition and has been serviced and inspected by our specialist staff. Gbsdpfsyidwhjx Af Uji Technical data: - 2-knife cutterblock - Planing width: 510 mm - Jointing table length: 2050 mm - Max. passage height: 220 mm - 2 feed speeds - Suction connection Ø 140 mm - Motor power: 4 kW / 5.4 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: surface planer, thickness planer, planer, jointing, thicknessing Reference: R-R04D8

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser Gbsdpjx Swqksfx Af Uei from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7265 TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth Gsdpfxjx Sq A Ho Af Uebi From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence - table length: 1910 mm - both tables adjustable THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers - geared feed roller - planing cutterblock - smooth outfeed roller - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg – Italian manufacture – Very good condition, used machine Godpfx Ajx Sqz Ajf Usbi Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Gjdpfx Asx R Dumsf Ujbi Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum surface planer width 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Weight 150 kg Motor power 2.0 kW Godevxh Nropfx Af Uobi Power supply 3 phase, 400V

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Gedpfovxh A Sjx Af Usbi Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: new, Year of construction: 2026, The Cormak PT265 planer-thicknesser is a solid and well-thought-out design that offers great possibilities for adjustment and mechanical processing of both hard and soft wood. The adjustment itself is simple and changing the planer to a thicknesser takes a few seconds. The latest version of the machine with an innovative tabletop opening system: ❌ Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. ✔️ The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. ✔️ This solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Stable construction resistant to vibrations The weight of the machine up to 170 kg combined with wide cast iron grinded tops 265 mm guarantees great stability, which ensures safe work. The additional rubber feet used allow work without the slightest vibrations. VERSION with the most powerful engine with a total power of S6: 2.6kW The PT265 planer-thicknesser is distinguished by an exceptionally powerful engine with a total power of S6 2.6 kW (S1 2.2 kW). This is much more than competitive devices offer, which translates into greater efficiency and stability of work. A more powerful engine means stable work and ease of processing hard materials: Hardwood requires more force for processing. A strong engine will handle this without a problem. Trouble-free change of the planer to the thicknesser. Gjdpfxewu T S As Af Uebi Switching from the planer to the thicknesser function is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. - Smooth height adjustment of the tops with a scale. - The thicknessing table mounted centrally on the column has a knob for adjusting the setting up and down - Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical data: Knife shaft diameter [mm] 75 Knife shaft speed [rpm] 4000 Suction nozzle diameter [mm] 100 Swing ruler tilt angle [°] 90 - 45 Number of knives 3 Shaft length [mm] 262 Knife dimensions [mm] 250x30x3 Maximum planer width [mm] 265 Maximum thicknesser width [mm] 265 Maximum planing height [mm] 180 Maximum thicknesser cutting depth [mm] 3 Maximum planer cutting depth [mm] 2.5 Thicknesser feed speed [m/min] 6 Fence size [mm] 700 x 150 Machine dimensions (length x width) [mm] 1080 x 269 Weight [kg] 170 Total engine power S6: 2.6 kW Power supply 230V

Condition: new, Year of construction: 2026, Planer-thicknesser – versatile woodworking machine A planer-thicknesser is a versatile woodworking tool that allows for flattening, thicknessing, and smoothing wood surfaces. Ideal for carpentry and furniture manufacturing, it enables precise planing, edge processing, board production, creation of joinery components, and preparation of materials for gluing. This is a stable machine equipped with a high-quality cast iron table, cutting knives for material removal, an electric motor, and convenient adjustments that make it easy to operate. Gjdpfxewt Axpe Af Uebi Also known as a jointer, the planer-thicknesser is designed for initial processing of both rough and hard wood, as well as soft lumber. Its purpose is to level, smooth, and bring wood to the desired thickness through mechanical processes. It’s especially valuable in carpentry and furniture production, where precision and repeatability are essential. Stable construction with enhanced weight for vibration resistance The machine weighs 170 kg and features wide, ground cast iron tables (250 mm), ensuring excellent stability and safe operation. Additional rubber feet allow vibration-free operation. VERSION with a high-performance motor – Total power (S6): 2.6 kW The PT260 planer-thicknesser stands out with its exceptionally powerful motor: Total power (S6): 2.6 kW Continuous power (S1): 2.0 kW This is significantly more than what many competitor machines offer, translating into better performance and more stable operation. Stronger motor = better efficiency and easier processing of hardwoods. Hardwoods require more power to process, and this motor handles them with ease. Effortless conversion from jointer to thicknesser Switching between jointer and thicknessing functions is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the dust extraction hood. Precision and ease of adjustment Smooth table height adjustment with scale Central column-mounted thicknessing table with handwheel for height regulation 700x150 mm aluminum tilting fence with scale strip for accurate angle settings from 90° to 45° Technical Specifications: Parameter Value Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction port diameter 100 mm Tilting fence angle range 90° – 45° Number of knives 3 Knife dimensions 250x30x3 mm Table dimensions 1100x250 mm Thicknessing table dimensions 600x248 mm Max. planing width (jointer) 250 mm Max. planing depth (jointer) 5 mm Max. thicknessing depth (single pass) 2.5 mm Max. cutting depth (thicknesser) 3 mm Max. workpiece height (thicknesser) 180 mm Thicknesser feed rate 6 m/min Fence dimensions 700x150 mm Machine dimensions (L x W) 1100x250 mm Weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 400 V

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Gedpfxovxh T Do Af Usbi Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90–45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 410 mm Maximum thicknesser width 408 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 3.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Planer table dimensions (L×W) 1640×410 mm Weight 280 kg Motor speed 2800 rpm Motor power s1 4.0 kW s6 5.6 kW Power supply 3-phase, 400V

Condition: new, Year of construction: 2026, CORMAK TH410 Thickness Planer – Industrial-Grade Precision for Professional Woodworking The CORMAK TH410 is a professional, industrial-class woodworking machine designed for precise and repeatable thickness planing. Equipped with a four-knife cutterhead, it delivers exceptional surface quality in a single pass. Thanks to its heavy-duty construction, stable worktable, and adjustable feed speed, the TH410 planer is ideal for high-intensity production of solid-wood and laminated components. Key Advantages of the CORMAK TH410 Planer Precision 4-knife cutterhead – ensures excellent surface finish and efficient material removal in a single working pass. Cast-iron worktable – a ground and polished table surface provides outstanding material glide and precise feed. Planing range 5–230 mm – suitable for both thin boards and large structural components. Selectable feed speed – allows adjustment of working parameters according to wood type and production requirements. Digital height adjustment system – highly accurate settings (up to 0.1 mm) enabled by a clear digital indicator mounted on the handwheel. Stable column-supported table – central support minimizes vibrations and increases processing repeatability. Safe and convenient operation – a hinged extraction hood allows easy access to the knives for quick replacement. Standard Equipment Four-knife cutterhead Polished cast-iron worktable Gbedpex Dlabsfx Af Uei Extraction and noise-reduction hood Extended table with rollers Digital height gauge Full safety features compliant with CE and operating manual requirements Optional Equipment Dust and chip extraction system Transport trolley Knife-setting jig Technical Specifications Parameter Value Planing width 410 mm Planing height adjustment 5–230 mm Cutterhead diameter 95 mm Number of knives 4 Cutterhead speed 4050 rpm Maximum cutting depth 4 mm Feed speed 6 m/min Dust extraction port Ø100 mm Total motor power 4.2 kW Motor power (S1 100%) 3.0 kW Voltage 400 V Extraction outlet diameter 100 mm Gross weight 266 kg Dimensions Parameter Value Width 1110 mm Depth 710 mm Height 1020 mm Table width 930 mm Table depth 410 mm

Condition: new, Year of construction: 2026, CORMAK PT310ECO Thickness and Surface Planer with Spiral Cutter Block – Precision and Work Efficiency The CORMAK PT310ECO is a modern planer-thicknesser engineered for high finish quality, reliability, and low noise levels. Thanks to its spiral cutter block with 30 replaceable carbide inserts, the machine delivers exceptionally smooth surfaces with significantly reduced vibration and noise. Its stable construction and powerful motor make it a versatile solution for professional woodworking—both in carpentry shops and in artisan workshops. Key Advantages Spiral cutter block – 30 inserts (310 × 25 × 3 mm) provide long tool life, precise planing, and reduced noise levels. Massive cast iron work tables – absorb vibrations and ensure stable material feed. High power output – 2.2 kW motor (S1) / 2.6 kW (S6) ensures consistent performance during demanding operations. Large working area – 310 mm planing width and 180 mm height capacity for various workpieces. Effective chip extraction – Ø100 mm extraction port allows easy connection to dust collection systems. Construction and Technology The PT310ECO is equipped with a spiral cutter block of 75 mm diameter, ensuring smooth operation and significantly longer durability than traditional knives. Each insert can be rotated four times, greatly reducing maintenance and operating costs. The planer-thicknesser features wear-resistant cast iron tables: 1290 × 310 mm (planer) and 540 × 310 mm (thicknesser). The adjustable fence angle between 90° and 45° allows for accurate guiding of materials even at an angle. Precision and Performance Maximum cutting depth: Planing mode: 3 mm Gbodew Ab Afopfx Af Uei Thicknessing mode: 4 mm Cutter block rotation speed: 5,500 rpm The machine’s rigid frame enables surfaces that are ready for gluing, lacquering, or further processing. A reliable thickness planer for both mass production and small batch work. Applications The PT310ECO is the ideal solution for: Professional carpentry and furniture workshops Prototyping labs and training centers Industrial maintenance departments Technical schools and trade colleges Standard Equipment Spiral cutter block with 30 inserts Cast iron work tables Cutter head guard Ø100 mm dust extraction outlet Feed switch and emergency stop switch Optional Equipment Mobile base Dust extractor Technical Specifications Specification Value Planer table dimensions 1290 × 310 mm Thicknessing table dimensions 540 × 310 mm Spiral cutter block diameter 75 mm Cutter block speed 5,500 rpm Cutting inserts 310 × 25 × 2.5 mm Fence tilt angle 90°–45° Chip extraction outlet Ø100 mm Maximum thicknessing height 180 mm Max. cutting depth 3 mm (planing) / 4 mm (thicknessing) Motor power (S1 / S6) 2.2 kW / 2.6 kW Maximum workpiece width 310 mm Weight (gross) 200 kg

Condition: new, Year of construction: 2026, CORMAK PT260 230V Jointer-Thickness Planer – NEW VERSION Compact and precise woodworking machine for professional and hobby use The jointer-thickness planer is a versatile woodworking tool that allows for accurate flattening, thicknessing, and surface smoothing of wood. Ideal for furniture making, carpentry, and material preparation, it performs jointing, planing, edge processing, board production, and surface preparation for gluing. Featuring a durable cast iron table, three-blade cutterhead, powerful motor, and precise adjustment controls, it ensures high performance with ease of use. Applications The CORMAK PT260 230V jointer-thickness planer is ideal for: Woodworkers and craftsmen producing furniture elements, moldings, and wood structures Renovation and construction workshops processing raw and laminated timber Hobby workshops seeking a reliable, high-precision planer for home use Schools and training centers providing hands-on woodworking education on professional equipment Standard Equipment Ø75 mm cutterhead with 3 knives (250 × 30 × 3 mm) Jointer table: 1100 × 250 mm Thickness planer table: 600 × 248 mm Adjustable aluminum fence: 700 × 150 mm (tilting 90–45°) Anti-vibration rubber feet Dust port Ø100 mm Operating manual (Polish and English) CE Declaration of Conformity Optional Accessories Mortising and drilling attachment Chip and dust extraction unit Knife setting jig Gbodsw H R Aispfx Af Usi Roller support stands Key Features ✅ Durable cast-iron construction ✅ Compact design suitable for small workshops ✅ Smooth and accurate planing and jointing ✅ Quick adjustments for thickness and depth ✅ Efficient chip removal via 100 mm extraction port Technical Specifications Parameter Value Cutterhead diameter 75 mm Cutterhead speed 4000 rpm Number of knives 3 Knife dimensions 250 × 30 × 3 mm Jointer table size 1100 × 250 mm Thickness planer table size 600 × 248 mm Max. jointing width 250 mm Max. jointing depth 5 mm Max. thicknessing depth 2.5 mm Max. thicknessing cutting depth 3 mm Max. workpiece height for thicknessing 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Fence tilt angle 90° – 45° Dust port diameter Ø100 mm Overall dimensions (L × W) 1100 × 250 mm Machine weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 230 V CE certification Yes