Used Ion-Exchanger for sale (7,193)

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65 Kjdpfx Aozty Hnjh Eedt

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 8,000 kg, type of input current: AC, Equipment: documentation/manual, Curd pre-pressing vat with a capacity of 12,000 litres and filling station cheese moulds from Tetra Pak Tebel. Year of manufacture 1999. In good condition, but with obsolete automation/PCL. We can provide PLC replacement and refurbishment on request. Available to visit. Documentation available. Kdjdpfx Ahoulnrvo Ejt

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Kedpjzwld Hefx Ah Eedt Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity.

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Strokes per minute with 15 mm stroke: 24 /min Kodezzkwmepfx Ah Eedt Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Kdodpfx Asxz Edzeh Eet

Condition: like new (used), functionality: fully functional, 1. Like-new tubular heat exchanger (HT) for steam against water or water against water, liquid medium against steam or water. Material: Stainless steel – all parts in contact with the medium. Head plates of the baffle chambers made of P265GH; inside surface platinum-plated with stainless steel. Support consoles made of P265GH. Suitable for recovering cooling water or flash steam; Sustainable energy utilization. Heat exchange surface area: 905 m². Heat output – depending on the medium, well over 1,000 kW. Water flow rate up to 700 m³ / hour. Kdodpfjzc R Tfsx Ah Est Tube-side pressure: 4.0 bar gauge; test pressure: 9 bar gauge. Shell-side pressure: 9.0 bar – test pressure: 16 bar gauge. Maximum temperature: 140 °C. For heat recycling or cooling, heating, heat exchange. Total weight: 12.0 tons. Dimensions: Length 6,500 mm; outer diameter 1,500 mm. Volume: 11,500 liters. The HT has been approved by Bureau Veritas as a pressure vessel – all documents are available.

Year of construction: 1993, condition: used, Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h Additional title: 2-stage heat exchanger Capacity: 600 hl/h Hot water: 750 hl/h Operating pressure: 21 bar Operating temperature: 100 °C Ksdpfxsztzcks Ah Esdt Length: 2,15 m Width: 0,95 m Height: 2,15 m Weight: 5000 kg Material: EPDM HT / NBR / 1.4439

Condition: excellent (used), Year of construction: 2022, joke Technology ENESKA PostPro – Post-processing station for 3D printing Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Machine type: Post-processing station for additively manufactured components For sale is a used joke ENESKA PostPro post-processing station for the professional post-processing of additively manufactured plastic components. The system was specifically designed for the depowdering, deburring, grinding, polishing, and finishing of 3D-printed components and features a closed processing chamber with integrated extraction technology, LED lighting, and convenient tool control. The scope of supply includes a comprehensive original accessory package with various electric and pneumatic processing tools, abrasives, and other accessories as shown in the pictures. Technical data: Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Power supply: 400 V / 50–60 Hz Connected load: 6,500 VA Fuse: 16 A slow-blow Output voltage (U20): 24 V Kdjdpozrvd Hsfx Ah Est Working chamber volume: approx. 560 l Working chamber: Large stainless steel working chamber Closed processing chamber Large viewing window LED working chamber lighting Integrated compressed air connections Connections for multiple processing tools Equipment: Touchscreen control HEPA H13 filter system Closed processing chamber Manual operations with protective gloves Perforated stainless steel work table Tool connections for electric and pneumatic tools Height-adjustable machine feet Tool package: Electric precision grinder Electric high-speed grinder Pneumatic belt grinder Compressed air blow gun with spiral hose Compressed air hoses Original joke replacement gloves Grinding belts Grinding pins Grinding discs and flap discs Plastic hammer Screwdriver Other accessories as shown in the pictures Dimensions: External dimensions: approx. 1,437 × 1,685 × 1,640 mm Weight: approx. 748 kg Transport data: Weight: approx. 748 kg Easy loading using a forklift or crane. Condition: Used Machine from industrial use. Optical condition as shown in the pictures. Scope of supply: joke ENESKA PostPro Electric and pneumatic processing tools Compressed air accessories Original replacement gloves Grinding and consumable materials Other accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,517 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 350 kg, total height: 2,830 mm, total length: 2,600 mm, total width: 5,644 mm, table width: 500 mm, table length: 700 mm, table load: 350 kg, overall weight: 8,350 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 14,517 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The Deckel Maho DMU 70 eVolution from 2002 is a 5-axis universal machining center that was considered one of the top-of-the-line milling machines at the time. We acquired this machine directly from the factory, and it is still in good working condition! The machine is currently operational at our facility and can be inspected by appointment. Additional options & accessories: - B-axis travel: 0° - 180° Kdsdpfx Ahjz Apmij Eet - C-axis travel: 360° continuous, resolution 0.001° - Chip conveyor - BEMA programmable coolant nozzle - BLUM tool laser - SPINVISTA EVO Rotoclear - Approx. 10 SK40 tool holders - Original Deckel Maho documentation and electrical diagrams Weight & dimensions: Approx. 8350 kg Approx. 2600 x 5644 (incl. chip conveyor) 2830mm (L x W x H)

Year of construction: 2006, condition: used, This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions. Capacity: 240 hl/h 2 stages Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm Operating pressure: 23 bar Length: 2000 mm Width: 700 mm Kjdpfxeztzbys Ah Ejdt Height: 2000 mm

Condition: good (used), Year of construction: 2007, operating hours: 18,635 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,400 mm, Linde H25T Triplo 550 Freelift / Sideshift / Fork Adjuster LPG 2007 Kedpfx Ahezr Eire Eedt A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 06/1997, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, gearing type: mechanical, suspension: steel-air, total length: 8,200 mm, total width: 2,500 mm, total height: 3,750 mm, loading space volume: 16 m³, Year of construction: 1997, Equipment: air conditioning, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = Kjdpfszzz Trjx Ah Eodt - Aluminum fuel tank - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sun visor - Toolbox = Additional Information = Front axle: Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Leaf spring Rear axle 1: Twin tires; Differential lock; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: Air suspension Rear axle 2: Lift axle; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Air suspension Number of cylinders: 6 Gross vehicle weight: 26,000 kg Technical condition: good Optical condition: good Please contact Andre, Henri, or Andre for further information.

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Kodpfjt R Tr Sox Ah Ejdt

Condition: used, Year of construction: 1994, An on-site inspection is possible. Kdedpfxoz Aggys Ah Ejt

Year of construction: 1992, condition: used, Plate heat exchangers for milk processing. Kdsdpfxeh Eulgs Ah Ejt

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Kjdpfx Ahoz Aquho Ejdt Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: new, Year of construction: 2026, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, total height: 2,280 mm, total length: 1,445 mm, total width: 19,975 mm, overall weight: 2,600 kg, Technical Data: Travel Paths: X: 600mm Y: 500mm Z: 755mm W: 500mm W-Type: Servo Motor Dimensions (W x D x H): 1975 x 1445 x 2280 mm (max. 2785 mm) Required Space (W x D x H): 2100 x 1600 x 2900 mm Usable Electrode Diameter: ø 0.1 ~ ø 3.0mm (up to ø 6.0mm optional) Usable Electrode Length: Ksdoy R Npvopfx Ah Ejdt 800 mm Machine Weight: 2600 kg Max. Workpiece Weight: 1000 kg Power Supply: 3ø 380V 50~60Hz (adjustable) Max. Permissible Current: 30A Rated Load Capacity: 5 KVA Required Pneumatic Pressure: 5 bar Ion Exchange System with Sensor

Condition: good (used), Year of construction: 2016, operating hours: 9,698 h, Linde H35D-02 triplo465 / sideshift / 4th function / 2016 / 9700 hours. VERY WELL MAINTAINED / DIESEL A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Kdedpszypvlefx Ah Eot

Condition: used, Year of construction: 1995, functionality: unexamined, suction capacity: 10,000 m³/h, actuation type: electric, We are selling a dust extraction system from Wipos that we no longer need. We used the system to blow the chips into a container. The container is not included in this auction. Inspection is possible. Price is ex works; the buyer must dismantle the system. On-site support is available. No warranty is provided for the system! Kdodpfxezunzij Ah Eet

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, overall weight: 3,980 kg, total width: 1,300,000 mm, This is a vibrating screen with three fractions—an apparatus designed for sorting by grain size. Robust frame, springs where the screen is mounted (to reduce vibration transmitted to the structure). Working width (1,300 mm) Kdsdpfsxu Drqox Ah Eot At the top, there are two large electric vibrating motors (5.6 kW). At the bottom, you can see the screen grids (screen thickness 8 mm), through which the material is separated into three fractions.

Condition: used, Year of construction: 1989, Machine: AVE Rinser RAI24 rinser 24-stations Technical data: Kdsdpfoz Aiy Nsx Ah Eot capacity bph max.: 5000 working direction: left-right, rotative number of nozzels: 24 first cleaning step: water

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Kjdpfx Ahjy Hldno Esdt Dye container capacity: approx. 5 liters

Condition: good (used), Year of construction: 2018, operating hours: 20,540 h, load capacity: 3,500 kg, lifting height: 5,950 mm, fuel type: electric, construction height: 2,750 mm, Still RX60-35/600 Triplex 595 Freelift/3rd/4th function electric 2018 Continuous stock, see website. Prices are ex Nuland. Kdedpfx Aezy R Ucsh Eet Van de Wert Trading B.V. has a fluctuating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not present at all times. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. Kdodpfjx Syghjx Ah Est It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. Kjdpfx Ahozu Irns Eedt FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.