Used Internal Grinding Attachment for sale (17,676)

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Iiedpsrtr D Ijfx Ahyeh Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: good (used), Manufacturer ZIERSCH & BALTRUSCH Type FS 2560 Isdstpc Elopfx Ahysih year of construction 1987 Machine weight approx. 2000 kg x-path 600 mm y-path 250 mm z-path 500 mm Center height 500 mm Grinding wheel diameter 225 mm Grinding wheel width 25 mm

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Iiedpfxovwdhho Ahyjh Hydraulic motor 3.7 kW

Year of construction: 1984, condition: used, Technical details: Ijdpfx Aju Ng Sdjhysih material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm feed:: Stufe 2: 0,1 Doppelhub mm air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm - coolant device available *

Condition: new, width of the strips 75 mm band length 2000 mm band speed 37 m/sec total power requirement 3 kW weight of the machine ca. 0,105 t dimensions of the machine ca. 1,2 x 0,5 x 1,0 m Belt sander with - Contact disc: 200 x 75 mm - Surface grinding table width 75 mm throughout. Iisdpfsvblhkjx Ahyoh

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel Iodpfx Ahop Dt T Noyjih - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 CNC grinding machine, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power with speed control, easy-to-use CNC control with automatic grinding cycle, roughing, finishing, lapping, and deburring. The machine features a surfacing head mounted on the spindle housing with compensation. The machine has been professionally overhauled by us, the grinding spindle has been fitted with new bearings, and the guide rails have been newly scraped. The machine meets the geometry of a new machine and is therefore immediately ready for use. Accessories: Electro-permanent magnetic chuck 800 x 400 mm, coolant tank with paper filter system, partial enclosure. All functions have been tested, and the machine can be demonstrated under power. We would also be happy to take care of the installation and training on site. Financing/leasing is no problem; we would be happy to provide you with an offer! Iiodpfx Ahsrpz Eveyjh

Condition: good (used), Year of construction: 1989, grinding length: 400 mm, grinding width: 200 mm, Grinding area: 400 x 200 mm Magnetic area: 400 x 175 mm Vertical adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm Complete with: - Coolant system - Hydraulic unit - Documentation Isdpfx Ahov Tcy Uoyeih Country of origin: Germany Motor power: 1.5 kW Machine dimensions (L x W x H): 2200 x 1500 x 2100 mm Machine weight: 1100 kg

Condition: excellent (used), Tapping attachment Make EFEM Size 0 Iodpfeuf Ru Eox Ahysih (28548) Spindle holder MK 1 Tap M1-M 4 right -left run automatic

Condition: new, width of the strips 100 mm band length 915 mm dimensions of grinding wheel 200 mm Iiedpfoupxqwox Ahysh work table: 170x125 / 265x150 mm total power requirement 0,5 kW weight of the machine ca. 26 Kg dimensions of the machine ca. 0,6 x 0,5 x 0,3 m

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Isdpfjy Ud N Sex Ahyoih Video showing the machine in operation available!

Condition: excellent (used), Year of construction: 2013, 4 axes CNC work center for max. glass sizes : 3250 x 1620 mm for edging , milling and drilling and engraving one 14 positions rotating tool change . spindle power : 15 kw Ijdpfx Ahsz I Rgljysih spindle speed : 12000 rpm weight : 6450 kg

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) Iodpfx Ahozzpaaoyeih DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, COMPLETELY OVERHAULED in 2024.

Condition: used, REISHAUER US is a Thread grinding machine of high precision, engineered for superior accuracy and reliability. Capacities: grinding length 450 mm; clamping 1055 mm; max Ø 250 mm; thread Ø 2–250 mm; spindle bore 45 mm; weight on centres 200 kg; pitch ≤100 mm; angles ±40°; module ≤10; wheels Ø280–350 mm, width 4–40 mm. Specs: wheel speeds 6 steps 1700–2540 rpm; work spindle 27 steps up to 160 rpm; 3×380 V 50 Hz; grinding spindle 4 kW; total 15 kVA; machine ≈4700 kg; footprint 3300×1930×1800 mm. Accessories: coolant, wheel set, flanges, gear set, centers, oil-mist extractor. Achieves tight tolerances; suitable for automotive, aerospace, watchmaking, machine tools, medical. Iodpoz Dbh Eofx Ahysih

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, workpiece weight (max.): 10,000 kg, grinding wheel diameter: 400 mm, table diameter: 800 mm, spindle speed (min.): 1,200 rpm, spindle speed (max.): 8,000 rpm, type of input current: three-phase, grinding spindle motor power: 24,000 W, overall weight: 25,000 kg, input frequency: 60 Hz, workpiece spindle speed (max.): 10 rpm, total height: 4,650 mm, total length: 7,100 mm, total width: 8,000 mm, Equipment: documentation/manual, Machine status: 1. Based on the visual inspection, no obvious signs of cracking, deformation, or damage were found on the machine enclosure, working axes, hydraulic system, in-process measuring system, cooling system, filtration unit, or other visible components. 2. The machine can be powered on, and the power supply has been confirmed to be normal. However, the axis parameters and program data have been lost, so it is currently not possible to verify whether the individual axes and overall machine movements are functioning properly. 3. After power-up, the axis positions, coordinates, machining programs, and other related data displayed on the screen all appear as question marks (“?”). The NCU battery and UPS battery were replaced, but the condition remained unchanged. 4. After power-up, a large number of error messages appear on the diagnostic page, including A1-axis encoder errors, input voltage errors, control module errors, cross-error compensation Iiodpfxjz Dfn Aj Ahyeh errors, and other related alarms. 5. According to the customer, the handwheel is damaged and needs to be replaced with a new one. The laser printer may also be defective and requires further inspection and confirmation. 6. The hydraulic oil, cutting oil, coolant, lubricating oil, and other fluids have been stored or used for an extended period and should be replaced with new fluids. 7. The pneumatic system hoses/pipes should be inspected for aging, cracks, or damage. Replacement will be required if any deterioration or leakage is found.

Condition: good (used), Year of construction: 2000, Degen FSM 300 Surface Grinder High-quality precision surface grinder from the German manufacturer Willy Degen, model FSM 300. This machine is characterized by its compact design and extreme precision, making it ideal for tool and mold making. It is perfect for workshops with limited space, where accuracy must not be compromised. Extensive accessories and highlights included: Digital Readout (DRO): For precise work and error-free positioning. Original dust extraction and wet grinding unit: Ready for immediate connection for clean working and optimal workpiece cooling. Iodpfx Aheznirisysih Magnetic chuck: Already mounted for immediate use. Technical data (according to the nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Year of manufacture: 2000 Connection: 400 V / 50 Hz (high voltage) Power: 2.7 kVA / 5.6 A Control voltage: 24 V AC "Everything from one source: We would be happy to offer you suitable financing for your project." More new and used items can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1987, grinding length 1250 mm grinding width 400 mm workpiece height 550 mm table surface area 1750 x 500 mm dimensions of grinding wheel 400 x 50 x 127 mm 1250 x 600 mm grinding spindle speed 3000 U/min table load capacity 1100 kp Iiedpfx Ahoy Ezz Teysh total power requirement 13,8 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 3,4 x 2,4 m Surface grinding machine - Magnetic grinding wheel - Coolant system - Documentation

Condition: excellent (used), Year of construction: 2021, TMUA VR30 Belt Grinder, variable speed. Year: 2021. The WR can be used for deburring, edge rounding, brushing, superfishing, or manual polishing of parts made of any material and of any shape. The motor and unit assembly can optionally be mounted on a reinforced sheet metal base. The working units are adjustable around the motor shaft, and the housings are equipped with a Ø 120mm suction nozzle. Motor specifications: WR30: 2.2 Kw – 3000 rpm – 220/380v three-phase power supply. Control box: Variable speed drive in an enclosure with a potentiometer, emergency stop, and push button. Iiedpfx Asy U N A Rshyjh

Condition: used, Year of construction: 2003, LARCON METAL Iodpfx Ahjxrz Nbsyjih Model: LIJADORA DE RODILLO Number: 29 Year of construction: 2003 kW: 4 RPM: 1500

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine approx.LxWxH: 2,4 x 1,7 x 1,44 m height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: Iodpezdnlaefx Ahysih ·Turned parts ·Milled parts ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1983, Surface Grinding Machine MONOPRECIS 1DR Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1983 Ijdpfsz Iz R Ujx Ahyeih Manuel Magnetic chuck dimensions: 2500 x 130 mm Max Grinding wheel dimensions: Ø 170 mm Diamond system Manual movement Voltage: 380 V Dimensions (L x W x H): 1300 x 1200 x 1800 mm Weight: approx 800 kg

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Lubricant tank Voltage : 380 V Isdpfsz Iz Tpex Ahyoih Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: used, Surface Grinding Machine HARIG Super 612 - No 1 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Isdpfx Ahjz Iz T Aeyoih Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Ijdpfsya Dagox Ahyeih Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Iiodpfxezc D Dko Ahyoh Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.