Used Ink Mill for sale (4,087)

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse. Iaedpfx Aot Dwb Dsh Njl

Condition: used, Year of construction: 2001, Uncorker Manufacturer: Rink Model: KM 670/2K Year of manufacture: 2001 Additional title: cycled uncorker Iaodpfx Asw Ta D Ueh Nol Capacity: 30000 Bottles/h Power: 6,5 kW Current: 10 A Voltage: 230/400 V Frequency: 50 Hz Length: 2800 mm Width: 1000 mm Height: 2300 mm Formats: 0.33 l bottles, 0.35 l bottles, 0.5 l bottles, module box Running direction: from left to right Operation / Control: Simatic S5 Position: free standing Base construction: Square frame construction painted on dome feet Features: Crate transport, format sets/corker heads for 2x20 bottles and 2x24 bottles, housing with doors, protective grille, control cabinet with operating front, various spare parts Layer patterns: 2x20 bottles, 2x24 bottles

Condition: good (used), Year of construction: 1996, functionality: fully functional, Roller conveyor with rip saw and outfeed table Iajdpfeuvdfmsx Ah Nol motorized roller conveyor6m rip saw, pneumatic control, 400mm saw blade Outfeed roller conveyor with pneumatic side pushers, 10m Feed table 5 x 10m with cross conveyor

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Pallet rack Link 51 Partial sales of pallet frames and beams are possible. Large quantities available. Starting bay - 1 bay - length: 2,960 mm 2 frames: approx. 6,450 mm x 1,000 mm x 80 mm 8 crossbars: 2,800 mm x 90 mm x 50 mm 6 fixed anchors 16 safety pins Net price 377,75 € 2 bays - length: 5,840 mm 3 frames: approx. 6,450 mm x 1,000 mm x 80 mm 16 crossbars: 2,800 mm x 90 mm x 50 mm 9 fixed anchors 32 safety pins Net price 642,63 € Iasdpfx Aetpmmieh Njl 3 bays - length: 8,720 mm 4 frames: approx. 6,450 mm x 1,000 mm x 80 mm 24 crossbars: 2,800 mm x 90 mm x 50 mm 12 fixed anchors 48 safety pins Net price 907,50 € 4 bays - length: 11,600 mm 5 frames: approx. 6,450 mm x 1,000 mm x 80 mm 32 crossbars: 2,800 mm x 90 mm x 50 mm 15 fixed anchors 64 safety pins Net price 1.172,38 € 5 bays - length: 14,480 mm 6 frames: approx. 6,450 mm x 1,000 mm x 80 mm 40 crossbars: 2,800 mm x 90 mm x 50 mm 18 fixed anchors 80 safety pins Net price € 1,172.38 Other different variants possible. This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will be happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2002, Overview This KM 790/5K crate decapper was manufactured by Rink in 2002. The machine can be inspected at any time and is immediately available.  Technical details Output: approx. 2,800 crates/h (6K), approx. 2,040 crates/h (4K) Format parts: 5x centering plates for 0.7l GDB 5x centering plates for 0.75 Gastro 3x centering plates for 0.5l GDB/0.5l Euro Crate conveyor speed: 0.6 m/s Crate guide: All crates are moved lengthwise through the machine Noise level: 83 dB(A) Space requirement (LxW): 4,100 x 1,260 mm Working area: min. 1,500 mm on the operating side Hydraulics: Working pressure 150 bar, residual pressure 35 bar Pneumatics: Air consumption approx. 5.2 m³/h at 5 bar; operating pressure min. 5 bar, max. 10 bar; connection size ½" Electrical: Operating voltage 230/400 V; control voltage 24 V; power 12.0 kVA; frequency 50 Hz; fuse protection 3 x 25 A min.; supply line min. 2.5 Control: PLC control Siemens S7-300, HMI Simatic OP7 Isdpfxew Nk E Ie Ah Neal

Condition: good (used), 777 USED Bakery rotary trolley oven Winkler Compact. EXTERNAL DIMENSIONS OF THE OVEN (in cm): - width 158 - length 160 - height 250 + 20 (drive) We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Iaodotcuuwjpfx Ah Nol ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: ready for operation (used), Year of construction: 1989, Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible. Iaodsxbrxlepfx Ah Nsl

Condition: good (used), Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into interleaves of the desired length, directly from the roll. Fully automatic cross cutter PAL-Cut 800 Sheet dispenser that cuts interleaves quickly and precisely to the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rolls up to 800 mm wide. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 For roll widths up to: 800 mm Pick-up height: 1,368 mm Working speed: 480 pieces/hour Power connection: 220 V, 0.18 kW Iodjxamyhjpfx Ah Neal Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, TECHNICAL DETAILS - Pulling force : 80 [kN] - Max. broaching stroke : 1250 [mm] - Max. feed stroke : 500 [mm] - Spindle lengths : 650 - 1400 [mm] - Table width : 400 [mm] - Broaching speed : 1 - 10 [m/min] - Return stroke speed : 1 - 15 [m/min] Iasdpfxju E U R Tj Ah Nol - Installed power : 25 [kW] - Machine weight : 4300 [kg]

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 06120006957-98170 001, Brinkmann pump, 160 L/min. As new, Iaedpfxjw T Sufs Ah Nol

Condition: new, maximum load weight: 37,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Excerpt from the equipment specification. Full equipment details available upon request. Chassis, cranked: * Special steel frame made from high-strength fine-grained steels, electrically welded at junctions * Well-dimensioned outer frame * 3-axle arrangement * Spray suppression over the wheels * All steel parts shot-blasted * Side underrun protection made from anodized aluminium, mounted * Increased point load approx. 30,000 kg over approx. 5,000 mm * Custom design in the cranked section — for maximum low-bed length in conjunction with AluLeg landing gear * Drop supports instead of telescopic landing gear, maximum rear overhang radius for the tractor unit: 2,100 mm Iedpowx Dcmefx Ah Nsal Special body with extendable rear stanchions: * DINKEL – special superstructure * Self-supporting aluminium roof rail/profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps * Rear stanchions extendable up to approx. 4,200 mm (for loading/unloading only) * Three sliding stanchions per side with tension-relief springs * Additional central stanchion locks in the roof rail and parking position, operated by pull-cable and spring latch * DINKEL – mechanically adjustable lifting roof * Lifting roof height approx. 400 mm, operable from both or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, via height adjustment in the stanchions * Front panel overhang for driving under tarpaulin up to a total height of 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, bottom: 450 pockets, above: 4 rows of single pockets * In high-bed only 3 rows of insert slats, even spacing between them Floor: * Approx. 27 mm special waterproof bonded beech plywood, anti-slip surface * Steel plating in wheel arch area, forklift-suitable to DIN standard * Outer frame with flush surface Brakes: * WABCO compressed-air brake system with EBS according to EC Directive 71/320 EEC, including PREV (park-release safety valve). Spring brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display * Including WABCO tire pressure monitoring Axles: * 3 x 10,000 kg SAF axles with drum brakes, low-loader design * Air suspension with raise/lower device, total stroke approx. 230 mm * Third axle is a friction-steered trailing axle with electric and mechanical lock Twin tires: * 235/75 R 17.5, 12-ply premium brand of our choice, including spare wheel holder Lighting: * According to EC standards incl. LED side markers * Position lamps in LED version * 2 additional reversing lights * 2 work lights inside the front bulkhead, top Paintwork: * Chassis with body in RAL color (RAL 3002) * Center stanchions and axles KTL-coated black * Corner stanchions in hot-dip galvanized finish * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body in single-tone RAL color Included special equipment: * Air suspension in ECAS version, operated on the semi-trailer * Center stanchions with additional roof rail locks, operated from below via pull-cable * Additional external unlocking for sliding roof frame * 4 stanchion adapters for special outer frame profile, freely positionable locking of center stanchions * PVC sliding tarpaulin, color SILVER similar to RAL 9006, for overwidth and overheight, flat hooks, tarpaulin folds, locks with pawl/OCS * Roof tarpaulin trans

Condition: good (used), Year of construction: 2011, Offered Equipment • Manufacturer / Model: LINK LABEL LLR-320-6VR • Type: 6-color letterpress printing press with inline converting • Web width: 320 mm Configuration: • 6 × Letterpress printing units (each with UV dryer) Iaodpfx Ahow Tc U Ns Njl • 1 × Flexo unit (for varnish or additional spot color) • 1 × Rotary die-cutting unit • Unwinder and rewinder • UV power supply & controller • 2nd pass scanner (web inspection system) _____ Advantages of this press ✅ Robust and proven technology – LINK LABEL presses are renowned for their solid construction and long-term reliability. ✅ Inline production – printing, varnishing, and die-cutting in a single pass saves time and reduces waste. ✅ High-quality UV curing – consistent print quality with stable color and sharp detail. ✅ Versatile application range – suitable for self-adhesive labels, tags, and packaging up to 320 mm web width. ✅ Cost-effective investment – an attractive alternative to newer systems, offering an excellent balance between performance and price. _____ Condition & Availability • Currently powered and in production • Inspection and test runs possible • Immediately available _____

Condition: ready for operation (used), Year of construction: 1996, Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible. Iodjxbrxfepfx Ah Nsal

Condition: good (used), Manufacturer: Easy-Link Overall dimensions: 2400 x 700 x 2300 mm Box size: 700 x 760 x 500 mm Isdjhyw N Sspfx Ah Nsal Belt size: 2700 x 190 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Measuring range X = 640 mm Iaodpfswb Dn Uex Ah Nel Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Resolution 0,5 um Max workpiece weight 300 kgs Max. speed 600 mm/sec² Air supply min. 5 bar Dimensions L = 1040 mm Dimensions W = 940 mm Dimensions H = 2320 mm

Condition: used, -Model: Compact -Dimensions: 1980x1780x2550mm -Trolley: 80x80cm -Capacity: 144 to 180 Baguettes -PN: 6775910 -Gas Burner Isdowtg Nljpfx Ah Nsal -Trolleys not included -Voltage: 230 - 400V -Power: 6 kW -Frequency: 50 Hz -Sold with Gas Burner

Condition: used, Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine -Manufacturer: Finke, horizontal surface grinding machine with magnetic plate Ijdpfxeh Ic Ntj Ah Noal -Magnetic plate: 550 x 200 mm -Traverse paths: x 500 mm / y 260 mm / z 260 mm -Drive: 1.5 kW -Grinding wheel: Ø max. 200 mm -Dust extraction device -Transport dimensions: 1950/1300/H1590 mm -Total weight: 1108 kg

Condition: used, Year of construction: 2016, Overview The crate decapping machine was complete renewed in 2016 by the company Hormes. The machine was previously used in a German company. Tech Specs: Capacity: app. 2.800 crates/h Formats: 0,7 l GDB in 12er crates 0,5 l GDB in 12er crates Crate dimension: 356 x 275 x 257 mm (0,5 l GDB) 356 x 275 x 346 mm (0,7 l GDB) Electrical control Siemens S7 control Caps For the decapping of aluminium and plastic caps, 28 mm Iajdpfowigy Nsx Ah Njl

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Iedpfx Ahewykcco Njal

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Isdsvgwqhspfx Ah Nsal Manufacturer: Brinkmann-Pumpen D-5980 Type: TC250/720 Overall dimensions: 1180 x 230 x 290 mm Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute

Year of construction: 2012, condition: good (used), Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 Iajdpfx Ahspm D T Uj Nol 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Condition: used, Year of construction: 1992, turning diameter 220 mm turning length 250 mm control SIEMENS SINUMERIK 820 T swing diameter 380 mm chucking diameter 250 mm x-travel 200 mm z-travel 250 mm spindle turning speed range bis 4000 U/min Iedsvh Ivqopfx Ah Noal rapid travel - longitudinal/face 15 m/min total power requirement 27,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant

Condition: used, Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel -Cable reel -Drum: Ø 300/160 mm Isdpfx Ahsd S D Dqo Neal -Weight: 11 kg

Year of construction: 2003, condition: used, Winkworth PV35 steam jacketed vessel 2003, stainless 35L steam jacketed vessel, stainless lid, central bottom discharge, max design temp 200'C, max design pressure 6bar Iaodpfx Ahodmn Tvj Nsl

Condition: used, Three-phase motor, electric motor -Power: 0.85 kW -Speed: 2800 rpm Iodjdzzilopfx Ah Noal -Shaft: Ø 14 x 27 mm -Construction: B14 -Dimensions: 245/175/H140 mm -Weight: 5.8 kg