Used Ingredient Silo for sale (820)

Condition: new, Year of construction: 2025, brand new cement silos Lodpfx Ajrk Nkwehvohd approx. 85m3/100ton by surcharge with ladder by surcharge with equipment (filter, overfill protection, etc) by surcharge with mobile foundations by surcharge with Screw conveyors soon delivery are possible Send us your request and we will be happy to provide you with a tailor-made offer (of course with all possible discounts)

Condition: like new (used), Used stainless steel container / silo Last use: Pharmaceuticals Item number: 10709 Volume: 100 liters Type: Upright in stainless steel frame Height of feet: 100mm Material (wetted parts): 14404 / AISI316 Design: Single-walled Operating pressure according to type plate: ATM Tank dimensions: Outer diameter: 610mm Inner diameter: 600mm Total width: 800mm Total length: 1200mm Total height: 950mm Cylindrical height: 250mm Materials: Interior: 14404 / AISI316 Outer parts: 14404 / AISI316 Equipment: Ledjrdxfcopfx Ahvohd Type plate: No Distance drain to floor: 120mm Outlet diameter: 150mm Removable frame

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Last use: Unknown Capacity: 650L Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm total height: 1655mm total width: 830mm total length: 1030mm materials: Interior: 1.4301 / AISI 304 Outside: Galvanized steel facilities: Lhedpfx Ahod Sw Dfeved Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable

Condition: good (used), Used stainless steel tank / silo Last use: dairy products Item number: 10742 Volume: 1000 liters Type: Standing on 4 feet Material (wetted): 14301 / AISI 304 Construction: Single wall Manhole: 400mm Working pressure: Atmospheric Tank dimension: Outer diameter: 1100mm Cylindrical height: 770mm Total width: 1210mm Total length: 1210mm Total height: 1920mm Height of the feet: 860mm Materials: Ljdpfencfdfex Ahvehd Interior: 14301 / AISI 304 Outer parts: 1.4301 / AISI 304 Facilities: Diameter spout: 120mm Outlet valve: mock faucet distance drain to floor: 110mm Nameplate: no

Condition: excellent (used), functionality: fully functional, Aluminum silo with extended support ring - used - Volume: approx. 48,000 liters Container type: silo Condition: used Suitable for food: yes Construction: vertical Internal diameter: approx. 2,400 mm Cylindrical height: approx. 13,750 mm Overall height: approx. 15,000 mm Specific gravity of medium: 0.8 t/m³ Operating pressure: non-pressurized Material / Design Shell material: aluminum Features Support structure: foot ring/stand collar Top end plate: conical top Slope: approx. 15% Bottom end plate: cone Cone angle: 60 degrees Top: 1 x flange DN 100 PN 10 (filling) 1 x flange DN 150 PN 10 (vent) 1 x flange DN 150 PN 10 (level measurement) 1 x flange DN 100 PN 10 (spare) 1 x threaded socket 1 1/2" (sensor technology) 1 x roof edge railing with handrail 2 x crane lugs Shell: 1 x stand collar door (approx. 880 x 1800 mm) 5 x pipe brackets for filling pipe 5 x pipe brackets for overflow pipe 1 x filling pipe DN 100 (filling lines and connections for silo trucks may need to be retrofitted in part) 1 x overflow pipe DN 80 1 x threaded socket 1 1/2" (measuring probe) Bottom: 1 x cone (60°) 1 x flange DN 80 (overflow pipe) Fittings: The measuring and control equipment currently installed (where present) is included in the scope of delivery. However, no warranty is provided for its functionality! Otherwise as shown in the photos and drawing. Documentation: Drawing Lhjdpfsx Stccsx Ahvjd

Condition: used, first registration: 02/2004, Year of construction: 2004, Rotary valve TWBR22-N Mounting interface for chassis Lodsxux Aqopfx Ahvohd

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0656-000, space requirement length: 7,000 mm, space requirement width: 5,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 5,000 mm, total width: 5,000 mm, total length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet length: 1,200 mm, control cabinet width: 400 mm, type of input current: three-phase, input voltage: 380 V, power: 30 kW (40.79 HP), 6 stainless steel silos, of which 3 silos are equipped with internal mixers. Capacity per silo approx. 6 m³. Additionally, there is a big bag filling station with dust extraction included. Control cabinet including weighing hopper for batch preparation. Lsdex R Sr Hjpfx Ahvohd

Year of construction: 2004, condition: used, functionality: fully functional, Silo Lsdpfx Aheualkkjvehd Manufacturer ZEPPELIN Content 10m³, height 2.50m, diameter 2.0m Year of manufacture 2004 The system is available 3 times Subject to prior sale Please send inquiries by email only Note: The machine/unit is still installed and can be inspected on site. The buyer must remove it himself and organize shipping. This is not part of the offer price.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 20 h, Equipment: onboard computer, Mobile cement silo for big bags/bagged goods/loose goods; capacity approx. 3m³; with screw conveyor; electronic weighing system and vibrator, powered by a Honda 5kW unit, electronic control panel, fall protection, transport lugs Ljdpfsulddusx Ahvjhd

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Wall thickness: 6 mm Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 1. SILO CAPACITY: 300 TONNES 2. SILO HEIGHT: 25.110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 3.650 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 300 mm 7. SILO WEIGHT: 18.600 kg 8. MATERIAL OF SILO LEGS: Ø219 x 18 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns ----- 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns ----- SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 Ledpsx D Dgtsfx Ahvjhd SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: new, Empty weight: 75.000 kg Dimensions (LxBxH): 825 x 825 x 2084 cm Cargo space capacity: 740.000 l Wall thickness: 8 mm Aerial platform: Yes Thickness of end walls: 6 mm Lhodex D Dgaopfx Ahved Thickness of partition walls: 5 Number of fillers: 2 SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: new, color: grey, Empty weight: 35.000 kg Dimensions (LxBxH): 360 x 360 x 1250 cm Cargo space capacity: 384.000 l Number of fillers: 2 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL Lhsdpjx D Daysfx Ahvjd CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Wall thickness: 6 mm Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 1. SILO CAPACITY: 2000 TONNES 2. SILO HEIGHT: 258110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 12 300 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 500 mm 7. SILO WEIGHT: 110 600 kg Ljdpfx Aox D A Sujhvjhd 8. MATERIAL OF SILO LEGS: Ø500 x 18 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns

Year of construction: 2005, condition: used, Item: AV-1832-Vertical-Tank140m3 Vertical Silos Tanks capacity 140.000 L Exterior dimensions: Dia Ø 3500 mm Total H 16750 mm. Vertical stainless steel tanks - 6 pcs. Standing on 4 legs. Lhjdpfx Aoh A H E Eshved Klóper bottom with 4" outlet. Klóper top with ventilation. AISI 304

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Lhedsx Nufyopfx Ahvod Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Lhodex Nugdjpfx Ahvsd Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: Lhsdpfex Nuftsx Ahved 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design

Year of construction: 2007, condition: used, functionality: fully functional, 5 x 148 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of construction: 2007 Lodpoxqr Ekjfx Ahvshd Volume: approx. 148,000 liters Container type: Silo Condition: used Suitable for food: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Properties Inner shell material: Aluminium Notes: Material grade: AlMg3 / AlMgSi3 Support design: Foot ring / stand collar Top bottom: cone roof Slope: approx. 15 % Bottom type: cone Cone angle: 90 degrees Top section: 1 x roof edge railing, height: 1,200 mm 1 x crossover walkway with railing 2 x crane eyes 1 x manway DN 600 with vent nozzle mounted 1 x connection flange for level measurement 1 x nozzle for level indicator 1 x flange DN 100 (filling) Shell: 1 x service door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for level indicator Bottom section: The silos end at the bottom in a 90° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.

Condition: excellent (used), Plastic silos From Colortronic dryer Lhjdpfx Ajwydrqjhvod Volume: 400 and 200 L Price: 500 EUR per unit Price for 3 units: 1,200 EUR!!!

Year of construction: 1999, condition: good (used), 4 bitumen storage silos Year: 1999 Lhsdpfx Ahsxzilpevjd Capacity: 65,000 litres Price: €19,000 each

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base ring and filter housing, ø 3,000 mm. Designed for a specific gravity of 0.6 kg/dm³ (formerly used as a flour and starch silo). Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Total height: approx. 15,950 mm + 1,200 mm guard rail Weight: approx. 4,000 kg Specific gravity: 0.6 kg/dm³ Material: Aluminum AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with bolted cover sheet (cover sheet partially damaged, but can be repaired by us). Connections and fittings: On the silo roof: - 1 x circumferential roof guard rail (ø 1,800 x 1,200 mm) with two access openings - 1 x hinged manhole with protective grid DN 600 - 1 x access ladder to filter housing - 2 x crane lugs In the filter housing: - 1 x flange DN 100 for filling line - 4 x vent openings DN 600 with filter bags - 3 x connection ports for control/measurement technology On the silo shell: - 1 x ventilation grid (filter housing) - 1 x filling line - 1 x personnel door (approx. 1,850 x 800 mm) The silo terminates in a 60° cone NW 1500 with inspection opening. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo is not equipped with rupture discs or explosion protection devices. Lhodpfegig D Djx Ahvod For further details, please refer to the technical drawings and images.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, 2 x 50 m³ aluminium silos with long support ring, ø 3,000 mm (plastic granulate silo) Capacity: approx. 50,000 litres Manufacturer: Eichholz Year of manufacture: 2000 Quantity: 2 Diameter: approx. 3,000 mm Cylindrical height: approx. 10,000 mm Total height: approx. 11,250 mm Weight: approx. 1,400 kg Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: On the top deck: 1 x roof edge guard rail (ø 3,000 x 1,250 mm) 2 x crane eyes 1 x manhole DN 600 with vent nozzle 1 x flange DN 100 (filling) 1 x flange for level indicator 1 x threaded socket 1 1/2" (full indicator) On the shell: 1 x filling line with pipe supports 1 x access door (approx. 850 x 1,850 mm) 1 x cable protection conduit 1 x threaded socket (1 1/2") for empty indicator Ljdoxvtvzopfx Ahvshd Silo ends in a 60° cone with emergency shut-off slide valve. Otherwise as per photos

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ Storage Silos made of Stainless Steel (Material 1.4301) (formerly used as plastic granulate silos) Technical Data / Dimensions Available units: 2 Volume: approx. 172,000 liters Type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Lhjdpfx Ahsxvtvujvsd Cylindrical height: approx. 21,000 mm Total height: approx. 17,500 mm Weight: approx. 9,000 kg Specific gravity of medium: 0.6 to/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Specifications Internal shell material: stainless steel Remarks: Material grade 1.4301 Support type: base ring/stand collar Top base: conical top Slope: approx. 15% Bottom base: conical Cone angle: 60 degrees Top section: 1 x roof perimeter guard rail, height: approx. 1,200 mm 1 x crossover platform with guard rail 2 x lifting lugs 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded socket for overfill sensor 1 x flange DN 100 (filling) 1 x vent with hood Shell: 1 x operator access door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for empty indicator Bottom section: The silos terminate at the bottom in a 60° cone with an emergency shut-off slide valve and a mounted suction box (see photos). A triple-flight access ladder with back protection and rest platforms is optionally available.

Condition: excellent (used), Year of construction: 2011, Ingredient doser / Fruit feeder. To add a dry ingredient to a liquid like ice cream or butter (this machine). Main components of the unit: 1.) Dosing unit, 2.) Lamella transfer pump, 3.) Horizontal Mixer (used on butter) and 4.) Control panel. Hopper with 1 x SS auger to feed of ingredients to the lamella pump. Product to be dosed can be dry or liquid if it has sufficient viscosity to be retained by the augers. Liquid product capacity 200 - 4.000 liter per hour, dry product capacity 20 - 400 liter per hour. Hopper ± 70 L mounted on 3 weighing/load cells. With inline horizontal mixer. On SS frame with adjustable feet, parts for CIP cleaning. Connections: 2x DN100 Tri-clamp. With documentation (in French). No operation panel (was centralised). Total dimensions: 206x110x163 (lxwxh) cm - weight: 237 kg. Lhodpfx Aex Idh Iehved

Condition: used, maximum load weight: 27,700 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2002, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,995 mm, Equipment: ABS, Feldbinder KIP 57.3 silo for powders and bulk goods with 3 axles, approx. 60 m³ Payload: 27,700 kg Axle: SAF Brakes: drum Support points: 4x !!! We can also offer a horizontal Feldbinder semi-trailer. !!! We are happy to assist you in financing/leasing through our partners. Lhodpfx Ahstvh T Tsvsd All information without guarantee. Subject to errors and prior sale.