Used Immersion Coolers for sale (1,411)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 2501HEX-special - 2200xxxxxx, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,767 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 46.3 m³/h, total width: 2,190 mm, total length: 3,465 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / Air-cooled chiller unit Type: Phönix PNG2 2501 HEX Special Manufacturer: MTA S.p.A. The Phönix PNG2 2501 HE models are compact water chillers suitable for outdoor installation. The unit is Eurovent certified. Equipment features: - xDRIVE controller system - Microchannel condenser coil - Sound-insulated compressor housing - Oversized evaporator and coil; evaporator flow rate: 35 m³/h / 88 m³/h Cooling capacity (kW): 270 Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 46.3 Available pump head (bar): 0 Ambient temperature (°C): 35 Refrigeration circuit: - Refrigerant: R513A, GWP 631, safety classification A1 - Refrigeration circuits (number): 1 - Compressors (number): 1 Pgjdpfxoxazidj Ahyjk - Capacity control (%): stepless from 25 to 100 Electrical data: - Voltage (V): 400 - Frequency (Hz): 50 - Phases: 3 - Max. power input (kW): 122 - Max. current (A): 201 - Starting current (A): 314 - Protection class: IP54 Dimensions: - Length (mm): 3465 - Width (mm): 2190 - Height (mm): 2425 - Weight (kg): 3767 - Connection: Victaulic DN 100 Serial No.: 2200xxxxx Year of manufacture: 2023 Condition: visually excellent, technically good Stock unit, new Price: on request in EUR (plus VAT, ex works MTA Italy) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA, Tribano

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 770 kW (1,046.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 8,000 kg, Equipment: type plate available, Available: York chiller in very good operational condition Pgedpfx Ahswu Iazeyek Capacity 770 kW

Condition: excellent (used), Blancher Pos. number: LTC00006401 Make: DTS Type: automatic direct steam heated full water screw blancher Model: 2004 Capacity: Ø = 800 mm x L = 3.660 mm Volume: ± 1.800 litre Input height: 1.650 mm Dimensions: L x W x H = 4.850 x 1.950 x 1.800 mm Frame: stainless steel Power supply: 400 Volt – 50 Hz – 3,0 kW Steam: 4 bar Features: stainless steel landing overflow sieve with collection tank for blanched water including steam injection temperature controlled with circulation pump mechanical motor gearbox This is linked with Cooler Pos. number: LTC00006331 Make: Lubot / Wakker Type: automatic screw cooler Model: 2004 Capacity: Ø = 500 mm x L = 3.000 mm Volume: ± 600 litre Output: 850 mm Dimensions: L x W x H = 3900 x 1000 x 1800 mm Frame: stainless steel Power supply: 400 Volt – 50 Hz – 0,55 kW Pedohbvmuspfx Ahysgk Features: mechanical variator as-is or tested and set to customer needs

Year of construction: 2001, condition: used, size 765 x 545 x 95 mm 10 units on stock Pjdpfxsvimrys Ahyogk - price per unit -

Year of construction: 2014, condition: good (used), Thermocontainer used; but in an extraordinary good condition, immediate use possible Type designation: C-780ü Technical data inside: 610 x 810 x 1570 mm Outside: 735 x 955 x 1900 mm Weight: approx. 98 kg Capacity in liters: approx. 780 With slide-in bars f. grids Features Locking in the middle of the door 2 side pull handles 1 folding handle in the door recess rolling chassis with rollers 108 mm, PA, cold-storage resistant Psdsd Syg Sopfx Ahyjgk Door stop Inner tray with slide-in rails Angle corner supports with folding PE - plates (2 mm thickness), light blue Profiled deflector plates (3-sided) 2 rigid wheels, 2 mobile wheels, lockable with padlock Loadable up to approx. 400 kg From company liquidation, REPRODUCED Fine cleaning is to be done by buyer Auction consists of one container Color sale depending on stock approx. 100 pcs. in stock We offer the possibility to visit Tuesday and Friday in the time between 9 and 16 o'clock after telephone appointment arrangement. If necessary, the article can be taken away immediately. This offer is, unless specifically described, used goods. Items have been visually inspected and are as far as technically ok. shelves and cold plates are not part of the offer. However, these are also available from us Due to time constraints, we can only offer answers to this article if you provide us with a telephone number when making your inquiry. Price quotation in net per piece plus the currently

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Key Data Machine: TRAUB TNL 18 Year of manufacture: 2015 Condition: Premium grade / Excellent Previous owner: Smith & Nephew; manufacturer of orthopedic implants Machine type: TNL 18, version TNL18-9 Acquisition price (2015): 206,800 EUR Application: Long and short turning operations Manufacturer: TRAUB Drehmaschinen GmbH & Co. KG Podjyz Dywepfx Ahyegk Control / CNC Control system: TX8i-s with 64-bit RISC CNC/PLC processor USB interface PC connection via fiber-optic cable Color TFT flat-screen Electronic handwheel Software package: Helical / Polyform Thread cutting without compensation chuck Parting-off tool break monitoring Axis / GSP block position shutdown Spindles / Axes / Clamping technology Main spindle with belt drive Hollow clamping cylinder C-axis Change parts for collet F25 Mount for driven and programmable guide bushing Change parts for short turning mode Counter spindle with belt drive Hollow clamping cylinder X-Z-C axis Part ejector unit for flushing workpieces from the counter spindle Tool system Lower turret with X-Y-Z-H axis, main drive, 8 tool stations Upper turret with X-Y-Z-H axis, main drive, 8 tool stations Measuring systems / Additional axes Glass scale X-axis top and bottom Glass scale X4-axis Activation for driven and programmable guide bushing Workpiece handling / Peripheral equipment Workpiece discharge unit through the counter spindle Workpiece discharge unit at the front onto parts conveyor belt Hinged belt chip conveyor Manual rinsing unit for working area Connection for central extraction D 150 mm Coolant / Filtration / High pressure Operation with cutting oil Coolant supply 3 / 8 bar Tank: 500 l Compact belt filter on 500-l coolant tank Flow rate: approx. 100 l/min with emulsion or approx. 70 l/min with cutting oil Filtration fineness: approx. 30–40 micron Internal coolant supply up to 30 bar High-pressure coolant pump 120 bar incl. fine filter Immersion cooler for coolant cooling Coolant pump 20 bar Safety / Fire Protection Automatic CO2 fire extinguishing system Operational note: cutting oil EU conformity / CE present Electrics / Documentation Electrical system: 400 V / 50 Hz User documentation available Additional German documents available Magazine / Attachments Attachments for bar feeder magazine Suitable for LNS, FMB, IEMCA Magazine must be equipped for interchangeable operation with shift unit

Year of construction: 2010, condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Pgodpfx Aohuffcehyek Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V 1.85 KVA Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2021, Hyfra Gamma 13 Active Immersion Cooler, Year 2021, Immersion coolers are designed for the cooling of water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and suitable for integration into various machine layouts. A stirrer ensures uniform medium temperature in the Gamma immersion cooler model. Easy cleaning is facilitated by crane eyes on the cooling unit. The HYFRA Gamma series models are designed as immersion coolers for cooling water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and can be used with a footprint of just 0.5 m². This makes them ideal for integration into different machine layouts. Thanks to their compact design, cooling capacities of up to 28 kW are possible with only 0.5 m² of floor space. This results in significant flexibility advantages in production floor planning and a marked increase in productivity, as more machines can be accommodated. In the compact models of our immersion coolers, the condenser is installed horizontally. Due to this design, the coolers generate considerably less waste heat. Internal components remain unaffected by residual heat. A robust stirrer ensures uniform medium temperature in the lubricant tank in all immersion cooler models of the series. The HYFRA Gamma series can be easily removed from the tank for regular cleaning using the fixed crane eyes. Immersion Coolers: High-Performance Cooling Directly at the Application Site How does an immersion cooler work? In immersion coolers, the evaporator is immersed directly into the cooling medium. The liquid is held in a tank and is agitated vigorously and continuously for efficient cooling. Powerful stirrers support this process. What are immersion coolers used for? Immersion coolers are commonly used for temperature control of coolant lubricants in filtration and mechanical engineering to ensure the performance of connected equipment. They are also used in metalworking for indirect cooling of tools and workpieces. Typical applications include CNC and conventional machine tools for milling and grinding. Immersion coolers with modern controls and extensive features Depending on the required cooling capacity, HYFRA Gamma immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of FreeAdvanced control and a touch panel provides a structured overview and allows real-time monitoring of relevant parameters. Both freely programmable controllers come with multiple digital and analog inputs and outputs. The FreeAdvanced controller also features a full-text display and supports Modbus-TCP. Pgedpoyfutzofx Ahyjk

Condition: excellent (used), Year of construction: 2023, Immersion cooler Deltatherm E 4 Suitable for cooling: oil – emulsion – water Pgjdpfx Aox Rrn Iehysk Temperature range: 10–40 °C Several units available

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Psdpfx Ahew Iqumjyogk Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Pgsdpfx Aewx E N Ishysk Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Podpfx Ahjwwv Ifsysgk Installation elements Documentation

Condition: used, Year of construction: 1900, functionality: fully functional, volume flow: 6,600 m³/h, final pressure: 2.5 bar, power: 610 kW (829.37 HP), input voltage: 6,600 V, input current: 69 A, type of input current: AC, 2 pieces of cooling water pumps. Vertical column pipe pumps with open screw impeller Psdpfxsxb Tvxs Ahysgk Manufacturer: KSB Type: SEZ N 8-60 Impeller design: Open screw impeller Number of impellers: 1 Immersion depth: 2550 mm Shaft seal: Mechanical seal Radial bearing: RESIDUR fiber ceramic Support bearing: Segment slide bearing Cooling: Self-cooling with CuNiFe cooler Speeds: 745 / 600 / 496 rpm Flow rate: 6600 / 5750 / 4750 m³/h Delivery head: 25 / 15.5 / 10.5 meters Shaft power: 525 kW / 280 kW / 180 kW Pump efficiency: 85.7% Pumped medium temperature: 20°C NPSH: 8.0 m Casing: S235JRG2 Shaft: 1.4313 Impeller: 1.4409 Impeller diameter: 766 / 571 mm Electric motor: Siemens 1LA44548 AW94Z Power: 610 kW Voltage: 6600 Volt Current: 69 Ampere Including frequency converter Dimensions: Discharge nozzle: DN 800 Pressure rating: PN 10 Pump weight without motor: 4100 kg Length with motor: 7723 mm

Condition: used, mileage: 501,000 km, power: 375 kW (509.86 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: grey, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, traction control, Permissible total weight: 18,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, leaf-air suspension, tipper hydraulics, retarder, fifth wheel, Electronic Braking System (EBS), Electronic Stability Program (ESP), Traction Control System (ASR), air-sprung driver's seat, armrest for driver/passenger, automatic driving lights, radio, digital radio reception (DAB), adjustable steering column, alloy wheels, electric windows, roof hatch, outside temperature display, fog lights, electric exterior mirrors, kerb mirror, immobilizer, tinted windows, sun visor, aero package, cooler box, work lights, daytime running lights, cup holder, rubber floor covering, insulated cab, telematics system, speed limiter, subject to errors. Small dent on the left cabin wall. Vehicle is offered on behalf of TRUCK ON d.o.o. Vehicle location is Zagreb - Pgjdoyvwdxspfx Ahyek

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Pgodpsu Tg I Defx Ahyok Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Pgsdpfx Ahju Th S Ssyok Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2017, Complete welding system based on a KUKA KR 16 L8 arc HW industrial robot with KRC4 control and a Fronius CMT welding system. The set is equipped with a KUKA KP1 positioner and a wire feeder with cooling. All main components are from 2017. Technical data Industrial robot Model: KUKA KR 16 L8 arc HW Article No.: 10023544 Serial No.: 867099 Year of manufacture: 06/2017 Number of axes: 6 Payload: 8 kg Reach: 2015 mm Weight: 240 kg Positioner/rotator Model: KUKA KP1-HC1000R980 Article No.: 16008950 Serial No.: 152228 Year of manufacture: 06/2017 Weight: 850 kg Cooler Model: Fronius FK 4000-R FC Article No.: 4,045,837,632 Serial No.: 28245627 Supply voltage: 400 V Frequency: 50–60 Hz Current: 0.6 A Max pressure: 4 bar (0.4 MPa) Power: 2 kW Protection class: IP23 Wire feeder Model: Fronius VR 7000-CMT 4R/G/W/F++ Article No.: 4,045,963,000 Serial No.: 28245629 Voltage U11: 55 V / 4 A Voltage U12: 24 V / 2 A Wire feed speed: 0.5 – 22 m/min Welding current: – 360 A (100%) – 450 A (60%) Protection class: IP23 Pgedpfx Aoy Hktnohysk

Condition: new, functionality: fully functional, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 1,020 kg, empty load weight: 1,020 kg, operation weight: 1,020 kg, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Gunter Grossmann & Kubota Japan 1000 Y The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable crawler chassis 6. Articulated boom pro 7. Hidden travel motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy crawler tracks for a pleasant ride .. 14 servo joystick control 15.2 travel speeds We have all spare parts for machines of our brand available throughout Europe SPECIFICATIONS Model: Japan 1000 Y Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated power: 11.8 kw/2300r/min Main pump: Parkier Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Digging arm: Movable sideways Travel speed: Two speeds Drive motors: Hidden Style hoses: Hidden DIMENSIONS Overall dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770 mm Total track length 960 mm WORKING RANGE Pgjdpjvuk Uvofx Ahyjk Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. upgrade height of bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: new, functionality: fully functional, mileage: 1 km, color: red, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: additional headlights, Digging depth: 1.65 meters Lifting capacity: up to 150 kg Ground pressure: 0.35 kg/cm² Working pressure hydraulic system: 160-210 bar Dimensions: 255 x 90-110 x 222 cm (LxWxH) Rotation range: 360°, with a rotation speed of 13 rpm kink boom joystick control adjustable chassis Technical data: Manufacturer: HZC Power GmbH Model: DKB991 Pgsdpfevz Ih Tox Ahyek Engine: Buy diesel engine with 9.5 HP/7 KW Cooling: Hydraulic oil cooler Max. torque: 25 Nm Max. speed: 3600 rpm Digging force: 5.5 kN, lifting force: Up to 150 kg Fuel tank capacity: 5.5 litres Electric starter: 12 volts Maximum climbing ability: 25° Maximum speed: 2 km/h Ground pressure: 0.35 kgf/cm² Crawler chassis dimensions: 1090 x 180 x 320 mm (LxWxH) Hydraulic oil tank capacity: 17 litres (HLP46) Pump type: gear pump Slewing radius: 360° Slewing speed: 13 rpm Hydraulic pump: gear pump Working pressure: 160 bar Maximum pressure: 210 bar Breaking force on the bucket: approx. 650 kg Hydraulic output: 30 litres per minute Digging depth: 1650 mm Overload height: 2150 mm Reach on the ground: 3000 mm Dimensions: 2550 x 900-1100 x 2220 mm (LxWxH) Lifting capacity: 600 kg Product/shipping weight: 940 kg Special features: Excavator arm with articulation (120°), hydraulically adjustable chassis from 90 cm - 110 cm, additional hydraulic connection on the excavator arm for hydraulic accessories

Condition: new, fuel type: diesel, color: yellow, overall weight: 2,200 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2024, Equipment: additional headlights, GG06LX The only backhoe loader with these dimensions on the market. The machine is characterized by a high-efficiency engine, the new professional backhoe loader: GG06 LX from the international brand Günter Grossmann. Like all Gunter Grossmann machines, the machine has a company warranty so you can work worry-free. Pjdpfjp Aru Rox Ahyjgk The GG06 LX model is a great machine for construction, electrical and plumbing companies. Backhoe loaders are manufactured based on advanced technology that has been used in our company for many years. We have all spare parts for machines of our brand in stock in Europe Price 16500 EUR (excl. VAT) Backhoe loader equipped with 2 buckets SPECIFICATIONS Brand: Gunter Grossmann Model: GG06LX Gross weight: 2280 kg Engine: Kubota D1105 Fuel type: diesel Number of cylinders: 3 Rated speed: 3000 (r/min) Rated power: 18.4 (kw) Displacement: 1,123 (L) Cooler: yes Engine oil quantity: 4L Excavator hydraulic pump: Parker USA Hydraulic pump loader: PWG Italia Hydraulic oil loader capacity: 84 L Excavator hydraulic oil quantity: 42L Hydraulic tank capacity: 22 (L) Hydraulic tank capacity: 22 (L) DIMENSIONS Length: 4900cm Width: 1150 cm Height: 2350cm Wheel specifications : 26×12.00-12 26×12.00-12 Loading box width: 1150 mm min. clearance: 155 mm driving speed: 12 (km/h) min. turning circle: 2400 (mm) WORKING RANGE Body capacity: 0.6 (m3) Load capacity: 600kg Loading height charger: 2000 (mm) loader digging depth: 240 (mm) Loader bucket lifting time at full load: 8 (s) Bucket lowering time: 4 (s) Nominal bucket capacity: 0.08 (m3) Excavator maximum digging height: 3200 (mm) Excavator unloading height: 1990 (mm) Excavator Max. Digging depth: 2490 (mm) Excavator tilt angle (left/right°) 52/59 Excavator rated pressure: 20 (MPa)

Condition: excellent (used), Year of construction: 1990, Short Pasta Production Line - Braibanti line Cobra 1.15 single-head press with 460 mm of capacity, 3 vibrating levels, Romet 8-meter wrapping machine with 24 sectors, dryer loading elevator. 9-level, 13-meter, Teless dryer and single-level belt cooler. Year - 1990/1991 Capacity - 1000 kg/h . Pedpfx Asy Hfz Tjhyjgk

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Pgedpfx Ahshturvoyjk Control: Mazatrol preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numrotoplus software Numroto software for simple milling cutters and cords, Numroto software for simple and complex drills Pallet loader CNC handwheel Control cabinet cooler, Pgjdsyv Hv Ropfx Ahyjk automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow

Condition: used, Year of construction: 2009, Spinner VC 1460 vertical machining center Year: 2009 Control: Siemens 840D-SL Table length: 1620 mm Table width: 610 mm X: 1460 mm Y: 610 mm Z: 500 mm Spindle taper: ISO40 Speed maximum: 12000 rpm Maximum table load: 800 kg Positions in tool magazine: 32 Machine weight: 9300 kg. Accessories/options: spindle cooler swarf conveyor tool holders vices documentations Pgodpfjx Ew Hrjx Ahysk coolant tank through spindle coolant Under power in our warehouse!

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot Pgsdpfoy E Nz Iox Ahyek CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler