Used Hyundai Generator for sale (170)

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Hedpfx Afexdxhroionu Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20243 Specifications: Hnsdpfexdux Tex Afieu - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm - Track controls - Rear hatch does not lock - Chassis should be replaced - Loose track plates - Gps - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6-030, turning diameter over cross slide: 254 mm, turning length: 500 mm, spindle bore: 70 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 510 mm, overall weight: 4,300 kg, - Year of manufacture: 1996 - First commissioning: 1998 - Single owner, used in our own operation - Fully functional, powered and ready for demonstration - X-axis travel: 180 mm - Z-axis travel: 510 mm - Turning diameter: 254 mm - Turning length: 500 mm - Spindle speed: 3,600 rpm - Spindle bore: 70 mm - Spindle motor power: 15 kW - Control: Siemens 840 C - Chip conveyor - 8-position turret - 3-jaw chuck with hollow clamping cylinder - Fully automatic tool presetter Hjdpfjxgtvcex Afienu - Dimensions: 2,600 x 1,650 x 1,830 mm – 4,300 kg Net price ex-works Luckenwalde (Germany), excluding transport

Condition: new, feed pressure 8 bar Effective free air delivery 125/85 L/min Receiver capacity 24 / 8 l / bar weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. motor 230V / 0,75KW V / KW range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. Hnodpfxsu Imhio Afieu ? Drain valve on the tank. ? Humidity separator.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 70TY5064, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,600 mm, total length: 1,640 mm, total width: 2,349 mm, table width: 380 mm, table length: 380 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 14, The Hyundai SPT-V30TD is a compact 3-axis vertical machining center designed for high-speed drilling, tapping, and light milling applications, typically found in precision component manufacturing environments. The machine features a robust structure and is equipped with a Yasnac CNC control—known for reliability and effective motion control. Main Specifications: Travel: X: 500 mm, Y: 300 mm, Z: 300 mm Hsdoxgdluspfx Afionu Spindle Speed: Up to 8000 RPM, with BT30 (ISO 30) spindle taper Table Size: 600 mm x 380 mm Max Table Load: 200 kg ATC: 14 tool capacity, carousel type Control: Yasnac J50M Machine Dimensions (L x W x H): 1640 x 2349 x 2600 mm Weight: Approx. 3500 kg Notable Features: Rapid traverse rates (X, Y, Z): up to 30 m/min Dual table/pallet changer is sometimes featured, increasing productivity Compact footprint designed for efficient shop floor space use Suitable for drilling up to 20 mm, tapping up to M16, and various milling operations Machine need to be fixed. It shows fault 310: Servo Off.

Condition: used, Year of construction: 2011, operating hours: 5,735 h, 2011 | Hyundai R140W-9 | Used Wheeled Excavator | 5735 hours 📍Location: France, Limay 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 52 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine was working at the time of inspection, except as noted. There are no buckets with the unit. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39275 Equippo" is commonly used when looking up more details online. Hnedpfx Afsxdft Usiou 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,57x2,8x2,92 Hjdpfjxda H Nox Afionu Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: like new (used), Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, Hyundai WIA KF 5600C Machining Center (LIKE NEW) Hyundai WIA KF5600 C Commissioned: 2019 Table: 1250 x 560 mm 12,000 rpm X/Y/Z travels: 1100 x 560 x 635 mm 10.4” display Random magazine for 30 tools Internal coolant at 30 bar Chip conveyor Renishaw TS 27R probe Hnodpsxf Ey Dofx Afieu PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning height: 1,700 mm, workpiece weight (max.): 10,000 kg, turning diameter over cross slide: 2,040 mm, turning diameter: 2,000 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,661 mm, faceplate diameter: 1,600 mm, feed rate Z-axis: 3 m/min, total height: 6,177 mm, total width: 5,638 mm, total length: 3,937 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, type of input current: AC, rotational speed (max.): 258 rpm, rotational speed (min.): 1 rpm, torque: 16,070 Nm, table load: 10,000 kg, table diameter: 1,600 mm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, - CNC unit (FANUC 32i-A) - Automatic tool exchange unit (ATC) Use Pot quantities (18 Pot) For the linear cutting Standard tool holder Tool holder for the linear cutting - Chuck - Cutting oil Tank - Air Gun unit - Tool & Bed washing unit - Splash guard (Splash guard) - Hydraulic unit Hjdpoulk D Isfx Afijnu - Axis Slide Cover - Working lamp - warning lamp - Ladder and Hand Rail - Tool box for the standard maintenance - Manual MPG - Chip Conveyer

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel X: 1,000 mm Travel Y: 530 mm Travel Z: 510 mm Number of axes: 3 Max. spindle speed: 10,000 rpm Table size – length: 1,200 mm Table size – width: 510 mm MACHINE DETAILS Control type: Fanuc Dimensions & weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Transport packages: 3 Motor power: 11.0 kW Operating hours: 3,010 h EQUIPMENT Documentation Hodsxcn N Ajpfx Afionu CE marking

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Built in 2005, it is equipped with a Siemens 810D CNC control and features ideal for multi-axis machining, including automatic tool change and dual-pallet machining capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Hnedpsxfarhefx Afiju Year of Manufacture: 2005 CNC Control: Siemens 810D Machine Weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle Taper: ISO 40 Spindle Speed: 10,000 rpm Spindle Motor Power (cont. / 30 min): 12 / 16 kW Machining Capacity X-Axis Travel: 570 mm Y-Axis Travel: 410 mm Z-Axis Travel: 580 mm Distance from Spindle Nose to Table Surface: 197 – 777 mm Distance from Column to Spindle Center: 495 mm Table Table Dimensions: 2 x (650 x 410 mm) Number of Tables: 2 Maximum Table Load: 2 x 200 kg No. 2 Rotary Tables Ø160 mm with counter support Feed Rates Rapid Traverse X/Y Axes: 36,000 mm/min Rapid Traverse Z Axis: 30,000 mm/min Cutting Feed Rate X/Y/Z Axes: 1 ÷ 10,000 mm/min Automatic Tool Changer Tool Taper: BT-40 Tool Magazine Capacity: 24 stations Max. Tool Diameter: Adjacent Tools: Ø90 mm Non-adjacent Tools: Ø150 mm Max. Tool Length: 300 mm Max. Tool Weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line chiller Transformer Manuals, electrical diagrams, and CE Declaration

Condition: used, Year of construction: 2019, operating hours: 5,960 h, Year of manufacture: 2019 Hodpfxoxb Auks Afisnu Drive: Wheel Empty weight: 19.000 kg Dimensions (LxBxH): 876 x 250 x 342 cm Digging depth: 5.9 m

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Hodpfxjxda H Ao Afienu Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Hedpfsw Dcdyox Afijnu Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: used, mileage: 63,791 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,160 kg, first registration: 05/2016, loading space length: 2,375 mm, emission class: euro5, color: white, number of seats: 3, total length: 5,150 mm, total width: 1,920 mm, total height: 1,925 mm, Equipment: ABS, air conditioning, central locking, soot filter, Errors and prior sale excepted! Internal number: 1051. U780351 ----EQUIPMENT * Manual air conditioning – incl. pollen filter and recirculation switch * PIONEER radio with CD player * Transmission: 6-speed manual gearbox * Fog lights * ABS with EBD * Passenger side airbag * Driver side airbag * Exterior mirrors (2), electrically adjustable and heated * Brake assist * Rear double-wing doors * Tachometer * ESP (Electronic Stability Program) * Power windows, front * Tinted windows * Heated rear window with timer * Height-adjustable headrests (2) * Paintwork: Solid paint * Particulate filter: Diesel particulate filter * Upholstery: Fabric Hnjdpohznt Rsfx Afisu * Sliding side doors, closed * Mud flaps front and rear * Side impact protection * Power steering * Passenger double bench seat * Driver’s seat longitudinally adjustable * Partition with viewing window * Lashing eyes (10), lateral * Immobilizer * Central locking ... and much more. ----The vehicle is unprepared! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to consider your vehicle as part of a trade-in. Financing / leasing possible without down payment! Do you have any questions? We are happy to assist you!

Condition: used, functionality: fully functional, machine/vehicle number: HKHHN05KC0000861, Year of construction: 2012, operating hours: 4,030 h, load capacity: 3,150 kg, lifting height: 4,300 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, power: 48 kW (65.26 HP), fork length: 1,800 mm, drive type: Diesel, Diesel Forklift Chassis number: HKHHN05KC0000861 Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 28x9-15 Front tires condition: 20 - 40% Rear tires type: Superelastic Hnodpfexafa Tsx Afiou Rear tires size: 6.50-10 Rear tires condition: 60 - 80% Description: In addition to this MAKE-MODEL, we have around 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in stock at our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase & financing on fair terms are always possible for us. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Call me, Marco Levermann, I will be happy to advise you in detail on this MAKE-MODEL. By the way: Our forklift workshop specializes in repair and maintenance of large machines from 8 tons upwards. We can also offer your vehicle for commission sale through us. Side shifter, 3rd valve, 4th valve, half cabin, heater,

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Hjdpfjxfaqwjx Afionu Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Hnjdpfxoxadmrj Afiou Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 30 positions

Condition: excellent (used), Year of construction: 2007, Machining center - vertical Manufacturer: Hyundai KIA Modell: VX380TD Year of c.: 2007 Control unit: Fanuc Series 01-MC Spindle speed range: 12000 rpm Hnsdpfx Ajiw Ekdofiju Power consumption: 7 kva Type of tool holder: BT30 Slots in storage: 20 X-Axis movement: 500 mm Y-Axis movement: 350 mm Z-Axis movement: 350 mm Weight: 5000 kg

Condition: good (used), power: 221 kW (300.48 HP), fuel type: diesel, color: yellow, Year of construction: 2013, operating hours: 9,182 h, Equipment: air conditioning, Technical information Chassis type: articulated Empty weight: 23.200 kg Make of engine: QSL9 Top speed: 46 km/h Functional Lifting capacity: 15.350 kg CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: HHKHLK04LD0000050 Other information Front tyres / undercarriage remaining: 70 Hnjdpfsw Uk Uaex Afieu Rear tyres remaining : 70 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 8,6x3,1x3,59 Production country: KR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, mileage: 98,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2016, emission class: euro6, color: silver, number of seats: 3, total length: 5,515 mm, total width: 2,038 mm, total height: 2,685 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly & easily Internal ID Number: [ 2848 ] ----Optional extras available: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available with or without down payment ----Vehicle highlights: * 19% VAT deductible * Accident-free Hodpfxjxchu Es Afionu * Regularly serviced * Euro 6 emission standard * High roof + medium wheelbase * Special features: Metallic paint, tow bar 3000 kg, auxiliary heater, air conditioning, cruise control, rear view camera, navigation system, on-board computer, parking assistance, multimedia screen, Bluetooth function, leather trim, etc. Further equipment: Driver’s airbag, exterior mirrors with integrated turn signal, 100 Ah battery, 105 Ah battery, on-board computer, driver assistance system: emergency brake assist, front windscreen with upper tint, 130 A alternator, rear wing doors (180-degree opening), body type: high-roof panel van (standard), black radiator grille, load compartment partition without window, engine 2.5 L - 110 kW CRDi CAT, radio pre-equipment, 2 speakers, wheelbase 3435 mm, tire repair kit, particulate filter, low emissions according to Euro 5 standard, sliding door right side (load/passenger area), height-adjustable driver’s seat, seat upholstery: synthetic leather, front cabin: single passenger seat, start/stop system, 3 x 12V sockets in cab, electronic immobilizer, remote central locking, permissible total weight 3.50 t ----Interested in leasing or financing? We offer attractive deals – even without a down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information online is non-binding and provided solely for general vehicle description purposes. Errors, typos, and prior sale excepted. The binding condition of the vehicle is defined exclusively in the on-site purchase contract or through written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,400 h, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, mount diameter: 40 mm, Equipment: chip conveyor, High pressure 20 bar MACHINE EQUIPPED WITH: 4 vices + 40 cones + arbors + tools Hsdoxb Rtbjpfx Afionu

Condition: used, Year of construction: 2021, operating hours: 4,220 h, Year of manufacture: 2021 Drive: Wheel Empty weight: 19.000 kg Hjdpjv Sc N Tefx Afijnu Dimensions (LxBxH): 876 x 250 x 342 cm Digging depth: 9.3 m

Condition: good (used), functionality: fully functional, mileage: 6,500 km, power: 106.65 kW (145.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 24,000 kg, empty load weight: 24,000 kg, operation weight: 24,000 kg, lifting height: 943 mm, Year of construction: 2011, operating hours: 6,500 h, machine/vehicle number: HHIH0604TB0000030, Equipment: additional headlights, adjustable boom, cabin, hydraulics, Dear Sir or Madam, We are selling a Hyundai Robex LCR235 crawler excavator. It is in a generally good used condition. All functions are present and it performs them without any problems. Technical data: Year of construction: 2011 Operating hours: approx. 6,500h Weight: 24,000kg Total width: 3.20m Range: 9.43m Engine power: 107kw/145hp The price is net and negotiable after viewing. If you have any further questions, please do not hesitate to contact us. Dear Sir or Madam, We are selling a Hyundai Robex LCR235 crawler excavator. It is in a generally good used condition. All functions are present and it performs them without any problems. Hodpfovmwp Djx Afienu Technical data: Year of construction: 2011 Operating hours: approx. 6,500h Weight: 24000kg Total width: 3.20m Range: 9.43m Engine power: 107kw/145hp The price is net and negotiable after viewing. If you have any further questions, please do not hesitate to contact me.

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Hodpfou Ehi Aex Afisnu Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor.