Used Hydraulic Valves for sale (19,538)

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Psdpfx Ajyfmlvjh Hjgg Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Pgsdpoyfmlcjfx Ah Hjg Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Pjdpfx Aoycck Ash Hsgg -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Year of construction: 2024, condition: new, LOT of 5 knife gate valves from the brand STAFSJO Model MV D50 / 2" Maximum pressure: 16 BAR Pjdpoxv Ac Rsfx Ah Hogg Brand new, never installed

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Pgjdpfxsvvkmbo Ah Hjg Storage location: Nattheim

Condition: used, Year of construction: 2009, Technical details: sheet width: 3000 mm plate thickness: 6 mm Pgsdpfx Ahoybbz Ds Heg stroke: 102 mm back gauge: 1000 mm total power requirement: 11 kW dimensions of the machine ca.: 3900x1950x1700 mm weight of the machine ca.: 5650 kg

Condition: used, machine/vehicle number: YY9SL28MX2T01xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22195 Specifications: • 2013 model • EU-approved until: 12.06.26 • 3-axle • Tires (see pictures) • Hydraulic drive-over ramp • Extra reverse lights • Ready for delivery Pgedpfxeya T U To Ah Heg Description: We have a 2013 Damm SL-28M 3-axle machinery trailer with hydraulic drive-over ramp for sale. Everything works as it should according to the owner. Some cosmetic damage may be present since it is from 2013. It is EU-approved and ready for use. Ready for delivery. Technical approved: Yes EU-approved until: 12.06.2026 Own weight: 7780 Total Weight: 30000 Payload: 22220 Width: 255 Length: 1192 Model: SL-28m 3 akslet maskinslep m/ hydraulisk kjørebro

Condition: refurbished (used), functionality: fully functional, We are selling an excavator magnet, electromagnet, and hydraulic magnet ZANETTI HM5-14AZ SAT With mounting plate for quick coupler and practical 2+3 teeth for "digging through" construction debris and recycling material. The magnet is hydraulically driven, e.g., via the circuit for the trench cleaning bucket! The magnet contains an oil motor that drives a power generator, which in turn activates the electromagnet. You do NOT need a separate generator. The magnet is powered by the excavator's hydraulic system. You only need two hydraulic hoses to the excavator, forklift, or wheel loader. The magnet contains a hydraulic motor that drives the power generator inside the magnet. You turn the magnet on and off using the excavator's joystick. A very ingenious design! Excavator sizes from 5-14 tons. A 6-13 ton excavator with a hydraulic quick coupler (Likufix, OilQuick, Lehmatic, or similar) is ideal for quickly switching from bucket/grab to magnet. The purchase price pays for itself very quickly through the rapid sorting of reinforcement and other steel parts (it also lifts medium-sized steel beams, see photo) and the resulting scrap value! The magnet has seen very little use and is in very good, ready-to-use condition. The electronics have been improved (new electrolytic capacitors, more stable construction. See last photos). Pedpfx Ahjvtmmlo Hegg Sale excludes any warranty or guarantee. Sale to dealers or commercial customers only. The price is NET + 19% VAT. Pickup in 96231 Bad Staffelstein or delivery to you for an additional charge (we will be happy to calculate transport costs upon request).

Condition: used, Year of construction: 2004, machine/vehicle number: 03104474, fuel type: diesel, Empty weight: 15.500 kg Pgsdpfeya T D Iex Ah Heg Lifting capacity: 1.000 kg Working height: 2.300 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, operating hours: 3,374 h, machine/vehicle number: 1200018435, fuel type: diesel, Empty weight: 24.680 kg Lifting capacity: 1.000 kg Working height: 2.830 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Podpfx Aeya T A Rjh Hjgg Tyre brand: - Transport dimensions (LxWxH): 7.15x2.5x4.2 Please contact PFEIFER GROUP for more information

Condition: used, mileage: 384,000 km, power: 382 kW (519.37 HP), first registration: 04/2020, axle configuration: 4x2, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking heater, retarder, spoiler, = Additional options and equipment = - Adaptive cruise control - Rear work lights - Front work lights - Bluetooth - Roof spoiler - Differential lock - Remote central locking - Windscreen - Speed limiter - Tipping hydraulics - Air conditioning - Leather interior - Leather upholstery - Alloy wheels - Air suspension Pedpfxoydpb Rs Ah Hsgg - Air horn - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Lane departure warning system - Stability control - Auxiliary heating - Pre-heating system - Xenon lighting - Power take-off (PTO) = Further information = Front axle: alloy wheels; steered Rear axle: differential lock; alloy wheels Cargo space volume: 700 l Upholstery: leather Please contact Bastien Begemann or Corné Visser for more information.

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Pgodpfx Ahsuzlh Io Hog

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Podpfjwzzzfjx Ah Hegg Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: used, Year of construction: 2004, operating hours: 5,913 h, machine/vehicle number: 03104313, fuel type: diesel, Empty weight: 15.500 kg Pgedpfox Dqpujx Ah Hsg Lifting capacity: 1.000 kg Working height: 2.300 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, working width: 1,500 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, power: 7.5 kW (10.20 HP), overall weight: 3,500 kg, total length: 2,200 mm, total width: 1,800 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Hydraulic Guillotine Shear / Sheet Metal Shear Haco SST 150 / 4, year of manufacture 2006, Technical data and features: Cutting capacity 1500 mm x 4 mm, machine length 2200 mm, width 1800 mm, weight 3500 kg. Torsionally rigid, fully welded steel frame, stainless steel blades, stroke counter, independent hold-downs, cutting line illumination, softly padded hydraulic hold-downs. Pgodpfx Ajydfhmjh Hog Option to increase cutting speed by reducing capacity, pre-selection control for positioning the backgauge to the desired position, 1-meter angle stop with T-slot scale and a swivel stop, complete cutting table with T-slots at 1500 mm and 2000 mm, motorized swiveling backgauge with adjustment via front control panel, 650 mm stroke, etc. The machine comes from a government institution and is in top condition! Please see the photos! The machine is incoming, more photos will follow.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, lifting height: 1,450 mm, load capacity: 1,000 kg, total length: 1,700 mm, total width: 760 mm, input voltage: 400 V, type of input current: three-phase, height adjustment type: hydraulic, operating pressure: 180 bar, We are selling a mobile lifting platform from Trepel, Wiesbaden, which was used for loading and unloading trucks. The platform is in very good condition and operates flawlessly. Viewing is possible by appointment. Psdpfsydc Dfex Ah Hsgg

Condition: good (used), Year of construction: 2015, machine/vehicle number: C100298, Offer 26007 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity: - For steel sheet: 6.35 mm Pjdpfx Ahoyc Uuyj Hogg - For stainless steel: 4 mm - For aluminium: 8 mm - Adjustable cutting angle - Cutting length adjustment - Cutting line illumination - Number of hydraulic hold-downs: 14 pcs - Backgauge with AMADA positioning control: 10 – 1000 mm - Front squaring arm: 3000 mm - Support arms: 1500 mm - Rear area safety with light barrier - Electric foot switch - Strokes per minute: 12 – 26 - Drive: 400 V / 5.5 kW - Table height: approx. 860 mm - Floor space requirement incl. backgauge, without front support arms: approx. W 3800 x H 1950 x D 2300 mm - Weight: approx. 6500 kg

Condition: good (used), Year of construction: 2008, machine/vehicle number: 108334, Offer 25518 Hydraulic, Twin-column Guided Mitre Band Saw Technical Data: - Cutting range at 90° • Round: 310 mm • Flat: 520 x 310 mm - At 45° left, flat: 350 x 310 mm - At 30° left, flat: 230 x 310 mm - At 45° right, flat: 260 x 310 mm - Mitre adjustment left and right - Minimum workpiece dimensions (round/flat): 10 / 10 x 8 mm - Smallest cut length: 40 mm - Mitre angle display - Saw band dimensions: 5000 x 34 x 1.1 mm - Variable cutting speed: 20 - 140 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic workpiece clamping with adjustable clamping pressure - Bundle clamping device - Total drive power: 400 V / 6.0 kW - Space requirement approx.: W 3000 x H 1600 x D 1750 mm - Weight approx.: 1900 kg - Discharge roller conveyor with position-controlled length stop: 6000 mm - 1 x Infeed roller conveyor: 2500 mm - 3 x Infeed roller conveyors: 1200 mm each Psdsyc Um Nepfx Ah Hsgg

Condition: used, Model: PHP 80 Manufacturer: SCMB (Licence BLISS) Pedpjw Ec Stsfx Ah Hegg Serial number: 91-955 Mechanical characteristics: - Max force: 800 kN - Max stroke: 1600 mm - Distance between table and ram: 2500 mm - Ram base dimensions: 3230 x 2000 mm - Table dimensions: 3230 x 2000 mm - Table height from floor: 400 mm Drive system: - Main motor power: 22 kW - Motor speed: 1500 rpm Motion speeds: - Rapid approach speed: 100 mm/s - Working speed: 23 mm/s - Return speed: 39 mm/s - Max return force: 470 kN APPLICATION OF THE SCMB PHP 80 HYDRAULIC PRESS Heavy-duty hydraulic press designed for forming, deep drawing, bending, or assembling large-scale components. Suitable for industrial processes requiring long stroke and wide tooling surface. FEATURES / DIFFERENTIATORS – SCMB PHP 80 - Long 1600 mm stroke suitable for deep-forming tasks. - Large working surface (3230 x 2000 mm) on both table and ram. - Separate speeds for approach, forming, and return for optimized cycle time. - High return force (470 kN) allowing return under load conditions.

Condition: good (used), Year of construction: 2010, Press force: max. 1200 kN; Stroke: max. 52 mm; Dimensions (W x L x H): 4610 x 3910 x 2665 mm; Total weight (net): approx. 7000 kg Pgedpfoyaqgaex Ah Hsg

Condition: refurbished (used), functionality: fully functional, Technical data: Pgjdpfxou Aa I Eo Ah Hsg 400V/50Hz - 0,18kW - 11rpm

Condition: good (used), Year of construction: 2020, CNC ESA blade clearance adjustment via CNC, manual cutting angle adjustment, thin sheet support. Year 2020. Pedpfx Ajyanqijh Hegg

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm Psdpfx Ahsvzxq So Hegg table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 1990, pressure 160 t Pjdpewvva Sefx Ah Hjgg stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m Pgjdpfx Aovuufleh Hog year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request