Used Hydraulic Cylinder Double Acting for sale (29,243)

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Cedew A Amrjpfx Ab Tehf Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Outer tube diameter: 168 mm -Piston rod: Ø 80 mm -Stroke: 420 mm -Piston rod mount: Ø 40 mm -Piston diameter: 140 mm -Measurement eye to eye: 770 mm retracted -Measurement eye to eye: 1190 mm extended -Quantity: 2 pieces available -Price: per piece Codpsb A H Rvsfx Ab Tohf -Weight: 75 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) Chsdpfx Asw Smdfsb Tef TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Chsdpfelc N Rysx Ab Tjf

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t Csdot Hwpyspfx Ab Tohf dimensions of the machine ca. m

Condition: good (used), functionality: fully functional, Max. pressing length approx. 2,750 mm Max. gluing width approx. 1,750 mm 10 freely movable support arms, each with a hydraulic press cylinder and one grid-adjustable counter bearing Press cylinders can be freely positioned on the support arms Support arms suspended from above, allowing for quick relocation from one side to the other Dimensions of press cylinder block: 115 x 50 mm Dimensions of counter bearing: 115 x 50 mm Max. cylinder stroke approx. 30 mm Gluing rack movable on rollers Installation dimensions (LxWxH): 3.1 x 1.0 x 2.25 m Cedpsww Awgsfx Ab Tehf Press cylinders have been pressure-tested in stock.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm Csdpfxsw Dbkrj Ab Tohf -Weight: 11.1 kg/piece

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit Cjdpfx Abew Slcge Tshf - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Codpfxolc N R De Ab Tohf

Condition: used, Year of construction: 1987, pressure 125 t Chedpfx Aet Hwuiob Tof distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece Cededq U S Iopfx Ab Tohf

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Chedew Slbvepfx Ab Tsf Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: used, Year of construction: 1985, pressure 63 t Chedjt Hwxujpfx Ab Tof passage width 1350 mm stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pull cylinder: with integrated hand pump -Traction force: 50 t -Stroke: 155 mm -Piston rod: Ø 80 mm -Recordings: Inside approx. 145 x 50 mm, see photos -Number: 5x cylinders available -Price: per piece -Dimensions: 850/160/H420 mm/ 810/155/H415 mm / 810/155/H420 mm / 815/150/H630 mm Cjdpfei Exqiex Ab Tshf -Weight: 68kg / 66kg / 62kg / 65kg

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump Chedpfx Abovwa Tyj Tof -Manufacturer: Salami, Double hydraulic pump -Type: 2PB4,5/1PB2S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 5x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder: Short-stroke heavy-duty cylinder with hand hydraulic pump -Cylinder: stroke 10 mm -Piston rod: Ø 70 mm -Dimensions: cylinder 130 x 42 mm Cedpfewxt Ixjx Ab Tohf -Transport dimensions: 500/210/H140 mm -Weight: 6.9 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: FAG, single-acting light metal cylinder with spring return stroke 210 mm -Type designation: LZM 25/200 PN500 8607 -Stamp diameter: 63 mm -Lifting capacity: 25 t -Pressure range: max. 500 bar -Dimensions: 140/110/H365 mm Cjdpfx Aewxtw Tjb Tohf -Weight: 19.5 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Chodpfx Abewxtv Ae Tsf -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 50/50 -Stamp diameter: 110 mm -Lifting capacity: 50 t -Dimensions: 220/165/H220 mm -Weight: 19.5 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 50/50 -Stamp diameter: 112 mm Csdpfxowxtt Io Ab Tshf -Pressure: max. 450 bar -Lifting capacity: 50 t -Dimensions: 220/160/H220 mm -Weight: 19 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: Baumann, double-acting hydraulic cylinder from electric forklift EVS 25/14 -Stroke: 900 mm -Piston rod: Ø 40 mm -Hole diameter: 25 mm / hole spacing 1170 mm Cjdpeww Ap Njfx Ab Tjhf -Number: 2x cylinders available -Price: per piece -Dimensions: 1235/195/110 mm -Weight: 27.8 kg/piece

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Yale, hydraulic cylinder with spring return, single-acting stroke 100 mm -Type designation: YS-23/100 Chedpfxjwtmzns Ab Tof -Piston rod: Ø 42 mm -Lifting capacity: 23 t -Operating pressure: max. 700 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 150/85/H195 mm -Weight: 7 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Cedpfxefrpnle Ab Tohf -Piston rod: Ø 50 mm - Stroke: 385mm -Total length: retracted 675 mm -Intake: Bore Ø 40 mm -Ideal for building a hydraulic press - Quantity: 16 pieces -Price per piece -Dimensions: 675/145/H270 mm -Weight: 41kg/pcs

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 22 mm -Diameter eyes: 30 mm -Piston rod thread: M18 x 1.5 -Stroke: 200mm -Quantity: 1x available -Price per piece Chedpfx Abed Evuzo Tof -Dimensions: 445/90/H80 mm -Weight: 6.7kg

Condition: good (used), Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm Csdpfod Evu Dsx Ab Tjhf -Weight: 6.7 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder, compensating cylinder -Hydraulic cylinder: tie rod cylinder stroke 150 mm Chedjv N Eapjpfx Ab Tof -Type: DZL 50N28/ 150 SFSFF 40 .: 153/10948 97008023/03 -Piston rod: Ø 28 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 324/116/H105 mm / 335/120/H110 mm -Weight: 5.8 kg/piece