Used Hydraulic Arm for sale (24,738)

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Screw diameter 55 mm Shot weight 498 g Injection pressure 2070 bar Screw speed 220 rpm Clamping Unit Clamping force 2700 kN Opening stroke 600 mm Mould height min 200 mm Mould height max 600 mm Ejector stroke 200 mm Ejector force for / back 130 kN Ibjdpfsxn Uy Ssx Afijc This WITTMANN TM Xpress 270/2250 Unilopg B6P was manufactured in 2013. It features a screw diameter of 55 mm, a maximum screw speed of 220 rpm, and a clamping force of 2700 kN. The machine offers a maximum shot weight of 498 g and an injection speed of 980.0 cm³/s. It includes a Wittmann CNC 8 control for enhanced operation. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar Isdpfx Afjxn Tx Hoiobc engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Hydraulic guillotine shears in working order, cutting 3000 x 6 mm / 1500 x 8 mm Ibedpfx Aowh Slhjfioc Price depends on the service required.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, controller model: Trumpf TASC 6000, bending force (max.): 230 t, stroke length: 445 mm, distance between stands: 2,690 mm, working length: 3,230 mm, TECHNICAL DETAILS Press force: 230 t Bending length: 3,230 mm Distance between frames: 2,690 mm Stroke: 445 mm Installation height: 615 mm MACHINE DETAILS Control unit: Trumpf TASC 6000 Total power requirement: 42 kVA Machine weight: approx. 19,200 kg Machine height: 3,300 mm EQUIPMENT 2 bending aids Ibodpfx Afjxn Sumsijc Wila tool clamping system (top and bottom) 2 hand/foot controls Die shifting Lasersafe in front of the machine Side safety doors 6-axis backgauge

Condition: good (used), Year of construction: 1993, functionality: fully functional, Technical data : Pressing force adjustable 10 - 100 kN throat depth 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm Total power 2.5 kW Weight approx. 2.5 tons Oil filling approx. 150 ltr. Space requirement W x D x H approx. 0.95 x 1.5 x 1.95 m . Ibodpfxsxn Sllo Afisc Equipment and scope of delivery : . Travel / pressure changeover Pressure control valve with display on pressure gauge Adjustable holding time documentation .

Condition: excellent (used), Hydraulic pump, oil pump, gear pump -Pumps: are unused -Contents: approx. 20 l -Electric: 24 V 3 KW -Working pressure: 140 bar -Number: 13x pumps available -Price: per piece Ibedpfx Aecgqdaefioc -Dimensions: 900/175/H210 mm -Weight: 24 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 44,000 h, This 6-axis KUKA KR16 robot arm was manufactured in 2007. It features a rated payload of 6 kg, additional arm load of 10 kg, and a total load capacity of 36 kg. With a working space volume of 24 m³ and a weight of 240 kg, it operates efficiently within a temperature range of +5 °C to +55 °C. Consider the opportunity to buy this KUKA KR16 robot arm. Contact us for more information about this machine. Isdpfx Afsxn Uy Esisbc Application Types Robotics

Condition: good (used), Year of construction: 1975, Manufacturer: Sagita – Beyeler License Ibjdpfx Afew Ecwcoijc Model: 2550 × 10 (Sheet length × Cutting thickness) Cutting length: approx. 2520 mm (effective) Max. cutting thickness (steel): ~10 mm Backgauge: approx. 750 mm, motorized adjustment Blade gap adjustment: manually adjustable Space requirements: with table supports: 3,200 × 2,800 × 1,600 mm transport-ready: 3,200 × 2,150 × 1,600 mm Weight: approx. 6,300 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2014, Hydraulic profile bending machine Fast delivery time, prior sale reserved Country of origin: Turkey In stock: 1 Shaft diameter: 60 mm Roller diameter: 177 mm Number of driven rolls: 3 Motor power: 3.7 kW Speed: 6 m/min Flat bar upright (section/min. diameter): 70x10 mm / 600 mm; 30x10 Flat bar horizontal (section/min. diameter): 90x25 mm / 500 mm; 50x5 mm Square steel (section/min. diameter): 40x40 mm / 500 mm; 20x20 Round steel (section/min. diameter): Ø 40 mm / 500 mm; Ø 20 mm Tube (section/min. diameter): Ø 60x2 mm / 600 mm; Ø 20x Formed tube upright (section/min. diameter): 80x40x3 mm Square tube (section/min. diameter): 60x60x4 mm External angle iron (section/min. diameter): 50x5 mm / 1,000 mm; 30x4 Internal angle iron (section/min. diameter): 50x5 mm / 500 mm; 30x3 mm Iodpjxn Tbhjfx Afisbc Length: 1160 mm Width: 1000 mm Height: 1175 mm Weight: 1194 kg Demo machine / as-new condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, bending force (max.): 220 t, stroke length: 450 mm, working length: 4,250 mm, Equipment: foot remote control, TECHNICAL DETAILS Press force: 220 t Bending length: 4,250 mm Stroke: 450 mm MACHINE DETAILS Dimensions & Weight Space requirement: 5,000 × 3,000 × 3,000 mm Machine weight: 20 t Total power requirement: 54 kW EQUIPMENT Iedpfx Ajxn St Njfijbc 2 bending aids in front of the machine Parking area to the left for bending aids Light barrier in front of the machine 4 backgauge fingers Foot switch Including tooling

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Ibodpjhl Npqjfx Afisc Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: new, pressure 200 t stroke 300 mm table surface area 1900 x 440 mm Isdoxabw Ispfx Afijbc column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), Control Unit Brand HAITIAN This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Ibsdpfexn Uxhex Afijc Application Types Injection Moulding

Condition: excellent (used), Catalogue number: 7502 TECHNICAL DATA DTBC-P feed trolley span between trolley wheels 750mm diameter of fed raw material 100-800mm total size of lateral shift 160mm log rotation left and right 360 degrees forward and reverse speed smooth hydraulic pump motor power 5.5kW DTCB auxiliary trolley span between trolley wheels 750mm range of lateral shift 160mm log rotation left and right 360 degrees Isdpju R Nihefx Afiobc side shift motor power 1.1kW feed trolley dimensions L/W/H 2850/1400/1500mm auxiliary trolley dimensions L/W/H 950/650/750mm total weight 1450kg ADVANTAGES – Polish production – solid construction – complete with cables, chains – used machine, very good condition, after general renovation (invoice available for inspection) PRODUCT FEATURES The auxiliary trolley is designed to support a log or a prism from the feed side of the sawmill in the diameter range from 100 mm to 750 mm. The feed trolley is designed to feed logs and prisms to sawmills in the diameter range from 100 mm to 750 mm. The device used for log manipulation, namely for securing the log in the tongs, transverse shifting, and log rotation is performed by hydraulic drives. Net price: PLN 59,900 Net price: EUR 14,100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names only for informational purposes, enabling the identification of the product. We only resell goods that the manufacturer has previously introduced to the market. We do not have any business relations with the manufacturer.

Condition: used, machine/vehicle number: 72004250751, table width: 900 mm, table length: 2,000 mm, OMET Press, 250T capacity Table 900x2,000mm Strokes per minute: 30-60 Ibsdsxnzd Rjpfx Afiec Travel: 18-200mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Ijdpexn Srxefx Afisbc Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW Ibsdjgp T Euepfx Afisc - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket Iedpfx Afexabnaoijbc - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: excellent (used), Catalogue number: 7740 TECHNICAL DATA Dimensions of heating plates: 3000x1350mm Number of loads: 1 Shelf heated electrically Clearance: 340mm Number of cylinders: 6 Cylinder diameter: 80mm Total power: 20.7kW Pump motor: 1.1kW Dimensions (L/W/H): 3570x1600x2200mm Weight approx.: 3500kg ADVANTAGES – German manufacturing Isdjxbggqepfx Afiobc – Shelves heated electrically – Unpainted – Excellent condition – Used press Net price: 48,900 PLN Net price: 11,500 EUR depending on exchange rate 4.25 EUR (Prices may change with higher fluctuations)

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Isdpfxexabcws Afisbc Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW Iedpsxaayhsfx Afiebc weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed Ibedpfxoxaar Do Afisc * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 60.0 t Iedpfexaakgex Afijbc stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2021, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Ibjdpfx Afoxaabfoiec Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. Ijdpfew U U Svsx Afijbc - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual