Used Hsm V Press 605 for sale (55)

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. Kodpfslc Du Nsx Ah Nell more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t Kljdpjx H R U Sofx Ah Njl

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Kjdour Ravepfx Ah Njll Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition after overhaul, unused. Serviced exclusively by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600–1200 mm. Bale weight approx. 380 kg. Klsdpex S Sbdjfx Ah Njl

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH Kledpst H Rcajfx Ah Njl

Condition: good (used), Year of construction: 2002, functionality: fully functional, Vertical Baler HSM VL 600, Year of Manufacture 2002 Technical Data: Ksdsx Iryropfx Ah Nell Manufacturer: HSM Model: HSM VL 600 Year of Manufacture: 2002 Pressing Force: 60 t Drive Power: 7.5 kW Cycle Time (Idle): 37 s Filling Height: 1130 mm Filling Opening: 1150 x 735 mm Bale Size: 1200 x 1100 x max. 1200 mm Bale Weight: 550 kg Weight: 3575 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Inspection—powered if required—is possible by appointment at any time. Upon request, we can also perform trials with your own material for a handling fee. If you have any questions regarding the machine, please feel free to contact us by phone from Monday to Thursday between 08:00 and 14:00, and Fridays between 08:00 and 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not assume any liability for the information supplied or possible errors. The offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspection is possible by prior arrangement. Sale is ex works against prepayment, without warranty or guarantee.

Condition: used, Year of construction: 1995, power: 2 kW (2.72 HP), Vertical baler HSM 45 VL for SALE/RENT! Manufacturer: HSM Model: 45 VL Year of manufacture: 1995 Total available: 8 units. Kedox H Skbspfx Ah Noll Sale price: €1,200 per unit (ex works Lithuania)

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE OR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Specifications: Manufacturer: HSM Model: HSM 500 VL Pressing Force: 54–540 kN Bale Size: 1200 x 800 x 1200 mm Bale Weight: approx. 500 kg Max. Bale Size: approx. 1200 x 800 x 1200 mm (W x D x H) Press Chamber Dimensions: 1200 x 800 x 1520 mm (W x D x H) Kedpfsx Dlb Eox Ah Nell Motor: 7.5 kW Year of Manufacture: 2005 PRICE ON REQUEST!

Condition: ready for operation (used), Year of construction: 2003, Baling press HSM 500.2 VL Fourfold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000–1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Kodpfxjra Ak Es Ah Njll Feed opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Year of manufacture: 2002–2005, price: 3,400 EUR Baler HSM V Press 500.2 VL Year: 2006–2008, price: 3,600 EUR Transport height: 2600 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 6422.P01.347, bale weight: 100 kg, type of input current: three-phase, power: 7.5 kW (10.20 HP), year of last overhaul: 2023, The machine comes with a complete wiring diagram. Kjdpfx Aexz Avujh Nell

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Kledpfsv Ai Tgox Ah Nel Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Kledpera Nrmjfx Ah Nsl Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical specifications: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Klsdpfx Ahexuqkme Njl Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE ON REQUEST!

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Kodpfjxcngnsx Ah Nell Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Klsdpev Alacofx Ah Njl Unit pressure:, 2.33 kg/cm², Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg Kledpfora Nrxsx Ah Njl tying 4 x wire automatically

Condition: good (used), Year of construction: 2007, operating hours: 8,800 h, functionality: fully functional, pressing force: 24 t, filling opening width: 620 mm, filling opening length: 1,000 mm, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 200 kg, total width: 2,825 mm, total height: 1,940 mm, total length: 6,250 mm, input voltage: 400 V, power: 9.2 kW (12.51 HP), operating pressure: 220 bar, Presskraft: 240 kN Kodpfx Ahsvq Rple Nell Spezifische Presskraft: 64 N/cm² Antriebsleistung: 9,2 kW Spannung / Frequenz: 400 V / 50 Hz Taktzeit im Leerlauf: 17,2 s Pressleistung Leerlauf (theor.): 73 m³/h Breite der Einfüllöffnung x Länge der Einfüllöffnung: 620 x 1000 mm Ballenbreite x Ballenhöhe x Ballenlänge: 700 x 500 x 600-1200 mm Länge x Breite x Höhe: 6250 x 2825 x 1940 mm Gewicht: 4 t Art des Verbrauchsmaterials: Draht Pressgut: Folie, Gemischtes Papier, Kartonage, Stanzreste, PET Getränke und Aluminiumdosen,Weichverpackung

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Kledpowuk Nrjfx Ah Nel Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: F630273804, We are offering this as-new HSM ProfiPack P425 packaging cushioning machine including dust extractor, year of manufacture 2024. Ksdpjx Tqtnefx Ah Nell Manufacturer: HSM Model: ProfiPack P425 Year of manufacture: 2024 Condition: as new Category ID: 666 Type ID: 538 Machine type: packaging cushioning machine incl. dust extractor If you have any questions or require further information, feel free to send us a message.

Condition: excellent (used), Model Baler HSM V-press 1160 plus Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 4 kW Weight (kg): 2300 Year of manufacture: 2017-2021 2018 unit – price: 8,000 EUR Kledpfx Aev Al Tijh Nel

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Kodjra Rbgjpfx Ah Noll Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Bale binding: 4-fold wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Klodpfx Asx D U N Soh Nol Model: HL 4010 Year of manufacture: 2012

Year of construction: 2012, condition: ready for operation (used), This HSM ABW-ROTA-2200 was manufactured in 2012. A used foil cutter featuring a cutting width of 2200 mm, it includes an IR preheating zone and a cooling unit. The semi-automatic roll change at the front and automatic stacking of sheets on pallets at the rear enhance its functionality. Consider the opportunity to buy this HSM ABW-ROTA-2200. Contact us for more information. Application Types Other Woodworking Machinery Kjdpfx Ahjx D R N Ue Njll

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 Kljdpfxsn Hxiie Ah Njl - heating: included - cooling: included

Condition: excellent (used), Technical data: Kedpev Akmzjfx Ah Nell Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013