Used Hot Air Generator for sale (36,632)

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. Nkjdewb A Hijpfx Ad Net UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 8,250 kg, number of slots in tool magazine: 9, CNC Stair Milling Machine Nsdpfx Adsxucp Io Njkt CNC for stairs and general work Programs for stairs and general work included

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Nodpfsvg U Dxjx Ad Nokt Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min 9 bar operating pressure Nodpfx Aogw Dqpjd Nskt KW 30

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2412306110, total height: 500 mm, total length: 800 mm, type of input current: three-phase, overall weight: 50 kg, power: 0.15 kW (0.20 HP), input voltage: 230 V, warranty duration: 12 months, control voltage: 230 V, volume flow: 600 m³/h, Electrostatic filter for oil or emulsion Nkjdpfx Adsybbrcj Net

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm Njdjx Tfmiepfx Ad Nekt capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: like new (used), Year of construction: 2020, operating hours: 273 h, functionality: fully functional, overall weight: 325 kg, total length: 1,100 mm, total width: 850 mm, total height: 1,160 mm, volume flow: 138 m³/h, operating pressure: 8 bar, noise level: 64 dB, color: yellow, operation weight: 325 kg, Screw-type air compressor with VSD (Variable Speed Drive) Free air delivery: 2.3 m³/min Discharge pressure: 8 bar Motor power: 20 HP Nodpfoyalccex Ad Nokt Power supply: 380 V / 3-phase / 50 Hz Startup method: Frequency converter Comes together with: - Air dryer AH-20SG from the same brand, Air Horse (2 m³/min, 220V single-phase) - Compressed air storage tank rated at 11 bar, 500 liters - Air filters from the brand Prevost. Possibility to also sell a complete air distribution system (pipes, fittings, elbows, manifolds, etc.) compliant with ATEX directive, from Prevost, for an additional price to be agreed.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Njdpfxex U Tgme Ad Nekt The unit looks as good as new. The system was only in operation for a short period.

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Nodjx Uqyqepfx Ad Nokt Up to 85% dry matter content. The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Possibility to test with your own materials.

Year of construction: 2001, condition: used, Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 Nedpfx Aju Huvfed Nokt -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm Nksdpfx Adsfzlvme Not -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: Filt Air, air filter type GT4-13AE-YBCO -Front frame dimensions: 1210 x 600 mm, see photo nameplate -Connection: Ø 230/250 mm -Number: 20x air filters available -Price: per piece -Dimensions: 1210/190/H600 mm -Weight: 16 kg/piece Nksdpfxstpyq Ue Ad Not

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 Nedpfx Adjv Rmmyo Nekt -Height: 30 mm -Price: complete -Dimensions each: 145/145/H30 mm -Weight 1.7 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements Nkedsv Rmp Iopfx Ad Nst -Manufacturer: Air Loc, leveling elements 2 pieces for machine tools and systems -Type: GLV 110 -Height: 25 mm -Shipping/Price: complete -Dimensions each: 125/125/H25 mm -Weight 1.2 kg/piece

Condition: used, Respiratory protection filter -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 Nedpfxsd N Ap Ee Ad Nskt -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

Year of construction: 2007, condition: used, Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW Nodpfxjb Uhnqe Ad Nekt -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: excellent (used), Aerosol extraction and filtration Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700 m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65°C Nkedpjx Rp Eqsfx Ad Njt Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, This listing is for a Jun-Air OF302 Application Oil-free compressor 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Thermal protection - Integrated Nsdpfx Adoxzg Rvs Nskt Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Njdpfx Adexzg Sae Nokt Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment

Condition: used, This listing is for an Air Liquide TR11 nitrogen Vessel. Nksdpjxx Aw Hsfx Ad Not The unit is in full working condition and is ready for immediate release. Range of non-pressurised vessels used to store and transport liquid nitrogen. Light alloy construction with composite material neck

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Nkjdpfx Adjt Tyqms Nst Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, functionality: fully functional, Capacity: 176 L Maximum working pressure: 15,5bar Testing pressure: 24,8 bar Transported gas: azote, oxygene, argon Azote (Nitrogen): Transported Gas load:128Kg Nkjdpewy Edzjfx Ad Not Maximum Gross load:253Kg Oxygen: Transported Gas Load: 182Kg Maximum gross load: 307 kg Argon: Transported Gas Load: 220 kg Maximum gross load: 345 Kg Pressure tested, ready to use. We have two pcs in stock, price is for one pc only. Please check out our other listings as well.

Condition: used, functionality: fully functional, Air Liquide Arpege 55 Liquid Nitrogen Container With Storage Racks. Main characteristics include: - Aluminum vessel for both the long holding time and large capacity line: Nksdjupttgspfx Ad Njt - Long holding time - Large capacity - Light weight and resistant - High quality polyurethane paint - On wheels Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 800 l/min. Nodexdbvrepfx Ad Nokt Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: new, Year of construction: 2025, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Nkedpfx Adexdbubj Not Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min