Used Heidelberg Letterpress for sale (333)

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm Ksdjx R Tiaspfx Ah Njll - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: good (used), Year of construction: 2004, only approx. 45 million impressions, Plus Version, CPC control with integrated register, Alcolor, Autoplate, Baldwin dampening circulation and cooling, blanket washing device, pull mark control, ultrasonic double sheet control, sheet decurler, Mediprint powder unit Klsdpfx Aox R Tgreh Nol

Condition: good (used), Year of construction: 2007, approx. 67 million impressions, EasyPlate, Alcolor, Technotrans dampening solution circulation and cooling, CPC control with integrated register, ink unit washing device, SuperBlue, pull mark control, ultrasonic double sheet control, sheet decurler, powder device Alphatronic 200, antistatic device Compact Kledpfx Aox R S Tdsh Njl

Condition: good (used), Year of construction: 2007, material: up to 0.6 mm only approx. 95 million impressions CP 2000 Axis Control Klsdpsx R Sxyefx Ah Nel Autoplate all washing units powderspray Grafix Alphatronic 200 High pile delivery IR dryer

Condition: like new (used), Year of construction: 2009, approx. 155 million impressions, Kljdpfx Ahjx R Svfo Nel perfecting 2/2 or straight 4/0 InpressControl, WallScreen, Alcolor Vario, Autoplate, chamber doctor blade, PerfectJacket, impression cylinder washing system, blanket and ink unit washing system, ultrasonic double sheet control, extended delivery 2 modules (X2), dryer HD Version 2, water-cooled dryer cabinet, powder unit WEKO AP 262, antistatic device Compact, air supply AirStar Pro water-cooled

Condition: good (used), Year of construction: 1995, Approx. 208 million impressions, CPC control ClassicCenter, Alcolor dampening system, Autoplate automatic plate changer, Technotrans central air-cooled unit, ink unit wash device, blanket cylinder wash device, chromed plate cylinder, pull mark control, high pile delivery, sheet decurler, Alphatronic 200 powder sprayer, Eltex antistatic device. Kodpfx Aex R Sqieh Njll

Condition: good (used), Year of construction: 2006, only approx. 145 million impressions Perfecting 2/3 or straight printing 5/0 Prinect AxisControl, CP 2000, Alcolor Vario, Preset feeder, Ink unit temperature control, Ink unit washing device, Blanket and impression cylinder washing device, Technotrans CombiStar CAN (air-cooled), Extended delivery, 2 modules (X2), DryStar 2000 air-cooled, PowderStar AP 232 powder sprayer, Chamber doctor blade system (coating unit), Anilox roller, Kodpox R Snhofx Ah Nsll StaticStar Compact antistatic device, RSP inline finishing system, Air supply via AirStar, air-cooled

Condition: good (used), Year of construction: 2006, only approx. 110 million impressions, CP 2000, Axis Control, Alcolor Vario, Preset streamfeeder, air-cooled ink temperature control, program-controlled washing units, coating unit with chamber doctor blade system, powder device Weko AP 262, air supply AirStar Pro air-cooled, perfecting 1/4 or straight printing 5/0 Klsdex R Sl Tepfx Ah Nol

Condition: like new (used), Year of construction: 2009, Approx. 240 million impressions, perfecting 1/4 or straight printing 5/0 PressCenter, WallScreen, Autoplate, Preset Plus feeder and Preset Plus delivery, CombiStar dampening solution circulation and cooling, Technotrans, ink roller cleaning system, tandem wash concept, blanket cylinder chromed, blanket washing device, PerfectJacket, CleanStar, powder sprayer WEKO AP 500 Duo, Compact antistatic device, AirStar Pro water-cooled air supply. Kljdpfx Asx R Slteh Njl

Condition: like new (used), Year of construction: 2010, Speed: 15,000 sheets/hour Counter: approx. 170 million impressions (August 2025) Specifications: Press Center Alcolor dampening Technotrans refrigeration Combistar CAN Ink agitators for UV ink Autoplate Automatic roller washer Automatic blanket washer Automatic impression cylinder washer Ink temperature control Preset Plus feeder Preset Plus delivery Manual non-stop feeder and delivery Ultrasonic double sheet detector Extended delivery X(3) Press raised by 50 cm Foil kit Weko AP262 powder spray Coating units with 3x coating pump IR/UV drying system UV interdeck after units 1, 2, 5 & 6, with variable positions IR interdeck in unit Y1 Hot air interdeck in unit Y1 IR/hot air/UV with 3 UV lamps in the delivery Klsdpfxox R Shno Ah Nol

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Klodpfxex N D Ude Ah Nsl Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Kjdpfxox N D Tgj Ah Nell Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), Heidelberg Eurobind 600 Perfect Binder Machine in perfect condition, with no signs of use. Ready to operate. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Heidelberg Eurobind 600 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives and cleaning brushes. Automatic cover feeding and creasing. Kodpfx Ahjx N Dyyj Nsll The set includes documentation, waste extraction, fume extraction from the glue gun, and an Abac compressor.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Klodpfx Aex N Dymoh Nel The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: used, Year of construction: 2000, This Heidelberg SM 52-2 is a robust two-color straight printing press, designed for high-quality sheetfed offset production. Built in 2000, it features a 370 x 520 mm format and has accumulated approximately 78 million impressions, reflecting its reliability and extensive use. The machine is equipped with advanced technologies to streamline workflow and enhance print quality. It includes the Alcolor automatic film dampening system for consistent ink-water balance, and the Autoplate semi-automatic plate change system for efficient job changeovers. The Cptronic control system and chromed cylinders ensure precision and durability, while the integrated blanket and ink-roller wash-up devices simplify maintenance and reduce downtime. Additional features include a powder spray and cooling unit for optimal print conditions, as well as a numbering and perforating unit complete with two cams, wheels, and multiple numerators???ideal for security printing or serial numbering tasks. Located in Germany, this press is ready to deliver high-performance results for a variety of printing applications. Format: 370 x 520 mm Equipment: Two colours Straight machine Alcolor Automatic film dampening Autoplate: semi-automatic plate change system Kedjxizdtepfx Ah Njll Cptronic , Chromed cylinders Blankets wash-up device - Wash device for impression Ink-rollers wash device managed from console Powder spray, Cooling unit Numbering and perforating unit complete with 2 cams and wheels and many numerators

Condition: used, Year of construction: 2006, The Heidelberg Stahlfolder Ti 40/4-SAK is a compact and efficient folding machine designed for small to medium-sized print shops. It has 4 pockets and an SAK stream delivery system Format: 400 x 650 mm Equipment: Feeder Feeder Mode: Flat pile feeder Type: FI-40 Control Unit: DCT 500 Folding Units 1st unit Type: Ti-40 Year: 2004 Pockets: 4 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Kjdpfx Ahowcqxvj Noll Roller condition: used condition Noise Protection Hood Serial number: F-00226 Delivery Delivery mode: Shingle delivery Technical Details Sheet size max: 400 x 650 mm Sheet size min: 80 x 100 mm Max. mechanical speed: 180 m/min.

Condition: used, The Heidelberg MO Numbering & Perforating Unit is a machine with a format of 480 x 650 mm, currently located in Germany. It is equipped with 1 inking unit, 2 linear perforating arms, 2 mounting rings, and 1 numbering shaft. Format: 480 x 650 mm Equipment: Klodpevfxqgofx Ah Njl 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Klodovfxwtopfx Ah Nel Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Kledpfx Ahox Nc Ato Njl Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment. Kledox Ncwkopfx Ah Nsl

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Kledpfx Aewzyg Hjh Nsl

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number O-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Kedownft Sepfx Ah Nsll Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system

Condition: good (used), Year of construction: 1984, FOR SALE Heidelberg GTS Press Main Features The GTS model is the large format (A3) version of the renowned Heidelberg platen. The "S" in its name stands for "Stanzen" (German for die-cutting), indicating that it is reinforced for finishing work rather than pure printing applications. Maximum paper size: 34 x 46 cm. Maximum speed: 4,000 sheets per hour. Pressure: Approx. 60 tons. Kodpfx Ahox Imvhe Nsll Weight: Approx. 2,250 kg.

Condition: good (used), Year of construction: 1982, FOR SALE Heidelberg GTP is a platen press (format 34 x 46 cm) designed for hot foil stamping (Prägen) and embossing. Renowned for its double rotary arm feed system. Main technical features Functions: Hot foil stamping, embossing, die-cutting, creasing, and perforating. Unlike the standard GT model, the GTP often lacks an inking system to prioritize pressing force. Sheet size: Maximum 340 x 460 mm; minimum 85 x 102 mm. Pressing force: Up to 60 tons, featuring a reinforced structure compared to pure printing models. Speed: Up to 4,000 sheets per hour. Weight: Approx. 2,250 – 2,300 kg. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS Kedpox Imizefx Ah Njll

Condition: used, Year of construction: 2007, approx: 49K Plates done RIP Prinect Meta Dimension Inlinepunch Klodpfx Ahex H Sn Ts Nsl Clean out G&J C85 unit Available: at short term