Used Hefele Silo for sale (726)

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Kdsdpfxsx Nufyo Ah Nog Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Ksdjx Nugdspfx Ah Nodg Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Kjdpsx Nuf Hsfx Ah Njdg Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer----Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9 t with air suspension. Axle spacing is 2 x 1,310 mm. Raise/lower control valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice of Alcoa Dura-Bright aluminium rims in 11.75 x 22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, in compliance with Standard 98/12/CE - ECE R13/09, brake wear indicator connected Kjdpfxox Nuf To Ah Nsdg Landing Gear: Mechanical landing legs with two speeds, 2 x 20 t support capacity with swiveling foot, rear crank landing gear Electrical System: All lights in LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis rail, yellow side marker lights in the required number, rear position lights, front clearance lights, rear license plate lights, lights according to Standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted on aluminium brackets at the level of the pivot bearing as per Standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at rear mounted at hose pipe height, 2x reversing lights in the underrun protection, 2x reversing lights at support height (each individually switchable from the power console) Tank Construction: Horizontal tank made of aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank with a 60,000-litre capacity. Tank warranty: 24 months from delivery Operating Parameters: Pressure vessel in accordance with Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 5 manholes DN 450 with swing and folding dome covers. Dome covers tightly sealed with 4 wing nuts each, rubber support for dome covers on top for stowage, rain gutter closed at front – open at rear Material Discharge: 1 discharge cone DN 800 in stainless steel (INOX), folding with INOX disc for loosening, discharge cone laterally swivelling, shut-off valve DN 150 with white seal, connection: STORZ-A Air Piping: 2.5" stainless steel air manifold mounted on the right operating side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of tank, 1x vibrator 1 m before the pivot bearing Access Ladder and Walkway: 1 aluminium ladder mounted rear left on the vehicle, 1 aluminium safety scissor handrail deployable from below with separate folding ladder section and parking brake when open, 1 aluminium safety catwalk runs along the top left of the tank, anti-slip coating on the tank Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminium with 4 DN 100 hoses and STORZ couplings, hose tube with compressor hose D.76 Accessories: Side-mounted ...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer – Type: CR 47 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle units, 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raise/lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tyres: 6 wheels fitted with 385/65 R22.5 tyres, as per manufacturer’s choice on Alcoa Dura Bright aluminium rims, 11.75x22.5 ET 120 Brake System: WABCO EBS 4S/2M compressed air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake pad wear indicator connected Landing Legs: Mechanical landing legs, two speeds, 2x 20t support load with swiveling foot, rear without support Electrical System: All lights in LED version, 24 volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis, yellow side marker lights in the required number, rear position lights, front outline marker lights, rear license plate lights, lighting in compliance with standard 97/28/CE-2007/35/CE, 2 multi-chamber lights mounted at pivot height on aluminum brackets in compliance with standard 97/28/CE-2007/35/CE, 1 LED work spotlight mounted on the tank, yellow warning beacon at the rear at hose tube height, 2x reversing lights on underrun protection, 2x reversing lights at the height of the supports (each switchable on the energy console) Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with 47,000 liters capacity, tank warranty: 24 months from delivery, operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80° C Filling Options: 4 manholes DN 450 with swing and folding domed covers. The dome covers are closed pressure-tight with 4 wing nuts each, rubber supports for the domed covers at the top for storage, rain guard at the front closed - rear open Material Discharge: 1 discharge cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swivel-mounted laterally, shut-off valve DN 150 with white seal, connection: STORZ-A Kjdpfex Nufmox Ah Nodg Air Piping: One 2.5" stainless steel air manifold pipe mounted on the right-hand control side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in stainless steel, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot bearing Ladder and Access Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety folding guardrail deployable from below with a separate ladder part, equipped with parking brake when opened, 1 aluminum safety walkway running along the left on top of the tank, non-slip coating on the tank Discharge Hose Storage: 4 hose tube containers 5m in length, DN 200 made of aluminium with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Kdedpox Nuftofx Ah Neg Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder - Condition: The silos have always been stored indoors and are in very good condition. Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last Kjdpjx E U Hcofx Ah Njdg The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Year of construction: 2007, condition: used, functionality: fully functional, 5 x 148 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of construction: 2007 Volume: approx. 148,000 liters Container type: Silo Condition: used Suitable for food: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Properties Inner shell material: Aluminium Notes: Material grade: AlMg3 / AlMgSi3 Support design: Foot ring / stand collar Top bottom: cone roof Slope: approx. 15 % Bottom type: cone Cone angle: 90 degrees Top section: 1 x roof edge railing, height: 1,200 mm 1 x crossover walkway with railing 2 x crane eyes 1 x manway DN 600 with vent nozzle mounted 1 x connection flange for level measurement 1 x nozzle for level indicator 1 x flange DN 100 (filling) Kdodexqr Ekopfx Ah Nog Shell: 1 x service door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for level indicator Bottom section: The silos end at the bottom in a 90° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.

Condition: good (used), 12 plastic silos From Motan dryer Capacity from 150 to 300 L With heating Price starting from 350 EUR per unit Discount available for multiple silos! Kedpfxewydqms Ah Nodg

Condition: excellent (used), Plastic silos From Colortronic dryer Volume: 400 and 200 L Price: 500 EUR per unit Price for 3 units: 1,200 EUR!!! Ksdpfowydrqsx Ah Nedg

Condition: used, axle configuration: 3 axles, first registration: 08/2004, suspension: air, tire size: 445/65R22.5, wheelbase: 1,280 mm, Year of construction: 2004, Tyre size: 445/65R22.5 Suspension: air suspension Drive: Wheel Empty weight: 8.320 kg Kedju U Ed Tepfx Ah Nodg Carrying capacity: 26.680 kg GVW: 35.000 kg

Condition: good (used), mileage: 702,984 km, power: 272 kW (369.82 HP), first registration: 07/2005, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 2005, Equipment: cruise control, electric window regulation, fog lights, power mirror, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - EPS - Radio/CD player - Side door = Additional Information = Front axle: Steering; Suspension: Leaf suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steering; Suspension: Air suspension Unladen weight: 11,760 kg Payload: 14,240 kg Gross vehicle weight: 26,000 kg Kdjdpfx Aowuup Neh Nsg Technical condition: Good Optical condition: Good Please contact Emad Al Shogran for more information. Vehicle number: 28 Renault Premium 370 / 6x2 / silo compressor / steering + lift axle / Euro 3 / 27 m³ VIN: VF622CVA000109327 Suspension: Leaf / air, steering + lift axle Transmission: Manual gearbox Engine brake Cruise control Euro 3 emission standard Silo compressor Superstructure: Brand: n.v OVA. s.a. Year of construction: 2005 4 x chamber 27 m³ = Company Information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: new, Empty weight: 176.000 kg Dimensions (LxBxH): 1500 x 1500 x 3500 cm Cargo space capacity: 2.200.000 l Wall thickness: 10 mm Thickness of end walls: 8 mm Thickness of partition walls: 6 Number of fillers: 2 1. SILO CAPACITY: 3.000 TONNES 2. SILO HEIGHT: 35 000 mm 3. SİLO DIAMETER: Ø 12.400 mm 4. QUANTITY OF SILO LEGS: 7 5. SILO OUTPUT DIAMETER: Ø 400 mm 7. SILO WEIGHT: 176.000 kg 8. MATERIAL OF SILO LEGS: Ø273 x 20 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 160 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 10 mm SHEET METAL 13. SILO BODY MATERIAL: ST -37, 10 - 8 - 6 -5mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 5 mm SHEET METAL. 15. INNER MAN HOLE IS INCLUDED. 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. Kdjdpjx D Dgysfx Ah Nsg 20. STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Wall thickness: 6 mm Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 1. SILO CAPACITY: 300 TONNES 2. SILO HEIGHT: 25.110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 3.650 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 300 mm 7. SILO WEIGHT: 18.600 kg 8. MATERIAL OF SILO LEGS: Ø219 x 18 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns ----- 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm Kdodpfex D Dgtex Ah Neg CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns ----- SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: new, Empty weight: 75.000 kg Dimensions (LxBxH): 825 x 825 x 2084 cm Cargo space capacity: 740.000 l Wall thickness: 8 mm Aerial platform: Yes Thickness of end walls: 6 mm Thickness of partition walls: 5 Number of fillers: 2 SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm Kdedpfxox D Dgas Ah Neg CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: new, color: grey, Empty weight: 35.000 kg Dimensions (LxBxH): 360 x 360 x 1250 cm Cargo space capacity: 384.000 l Number of fillers: 2 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL Kodpfxjx D Dbds Ah Nedg SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: new, color: grey, Empty weight: 35.000 kg Dimensions (LxBxH): 360 x 360 x 1250 cm Cargo space capacity: 384.000 l Number of fillers: 2 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 Kdsdpfxox D Dayj Ah Njg SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Wall thickness: 6 mm Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 1. SILO CAPACITY: 2000 TONNES 2. SILO HEIGHT: 258110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 12 300 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 500 mm 7. SILO WEIGHT: 110 600 kg 8. MATERIAL OF SILO LEGS: Ø500 x 18 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Kedjx D A Suspfx Ah Nedg Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns

Condition: new, Empty weight: 7.500 kg Cargo space capacity: 34.000 l Wall thickness: 6 mm Aerial platform: Yes Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 1 Kdjdpfx Aox D A Rdsh Nog THE TECHNICAL SPECIFICATION OF 60 TONS BOLTED SILO CAPACITY 50 Tons 38 m3(Cement density is accepted as 1.3 Kg / cm3) HEIGHT 8.300 mm WIDTH 3060 mm WEIGHT 7.500 Kg SILO FEET WIDTH Ø219.1*6 mm Pipe SILO FEET 4 Piece SILO FEET HEIGHT 4000 mm SILO FEET SHOES 15 mm Sheet Metal SILO FEET CROSS RAILING L70X70X7 Bracket CLAMP FLANGE Ø300 mm By Clamp Flange SILO FUNNEL SUPPLEMENT BEAM 100X10 mm SILO BODY SUPPLEMENT BEAM 100X10 mm SILO FUNNEL SHEET THICKNESS 5 mm SILO BODY SHEET THICKNESS 3 Piece 5 mm, 3 Piece 4 mm SILO COVER SHEET THICKNESS 4 mm THERE ARE A GUARDED SHIP LADDER OUTSIDE OF SILO THERE IS BARRIER AROUND THE TOP COVER OF SILO SILO FILLING PIPE IS 4 '' AND HAS SUPPLEMENT UP TO SILO FEET SILOS WILL BE PAINTED WITH EPOXY PRIMER ON INDUSTRIAL PAINT

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/2004, total length: 11,090 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2004, Equipment: ABS, = Additional options and equipment = - Air suspension = Remarks = TRANSPORT TO ANTWERP 590 EURO = Further information = Tyre size: 385/65 R22.5 Axle brand: BPW Suspension: Air suspension Unladen weight: 8,020 kg Kdjdpfx Ahex Nbdpj Nog Payload: 29,980 kg Gross vehicle weight: 38,000 kg Number of compartments: 8 Technical condition: very good Visual condition: very good

Condition: used, maximum load weight: 30,350 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 09/2026, Equipment: ABS, Kippsilo-Sattelauflieger für Staub- und Rieselgüter, Alukessel 60m³, 5 Mannlöcher DN 450 mit schwenk- und klappbaren Domdeckeln, Edelstahl Auslaufschüssel DN 800 nach oben klappbar arretiert und seitlich schwenkbar, Edelstahl-Schlitzauflockerung, Absperrklappe DN 180, 24-V-Kipphydraulik, ABS, Sattelhöhe 1.100mm - 1.200mm, light-weight trailer, Alu-Chassis, Alu-Achsblöcke, Optimierung des Reifenrollwiderstandes - Achsen BPW Typ ECO 3 Airlight II, Liftachse, Alu-Felgen Alcoa Typ Dura Bright, Laufsteg Aluminium, seitlicher Anfahrschutz Aluminium, Telematikomponenten, WABCO Bremsanlage, Aluminiumkasten für Hydraulikanlage, Hebe-Senkventil zum automatischen Höhenausgleich, gewichtsoptimierter Unterfahrschutz, Farbe weiß Kdsdpfx Ajx I Ub Ejh Nog

Year of construction: 2009, condition: ready for operation (used), A Cepi flour silo is available. Containers: 2. Container capacity 1: 4000kg, container capacity 2: 4500kg. Including electrical control and weighing hopper. Documentation available. An on-site inspection is possible. Kdodpfxex Iviwe Ah Njg

Condition: used, mileage: 515,865 km, power: 235 kW (319.51 HP), first registration: 12/2007, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 5,000 mm, color: white, gearing type: mechanical, number of gears: 8, suspension: steel-air, Year of construction: 2007, Equipment: electric window regulation, Drivetrain Drive: Wheel Make of engine: Renault Axle configuration Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Suspension: air suspension Weights Empty weight: 10.920 kg Carrying capacity: 15.080 kg GVW: 26.000 kg Functional Kodpfx Aouvip Reh Njdg Make of bodywork: OVA Number of compartments: 5

Condition: used, maximum load weight: 35,080 kg, overall weight: 39,300 kg, axle configuration: 3 axles, first registration: 01/2018, next inspection (TÜV): 01/2028, Year of construction: 2018, Internal vehicle number: G300206 German vehicle Located at our premises in Kaufungen - Kassel, available immediately For more information, please contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) OMEPS CM27 Year of manufacture: 2018 Axles: SAF Capacity: 27,000 liters Unladen weight: 4,220 kg Maximum permissible total weight: 38,000 kg Kdedpfx Ajwqkz Hsh Neg Financing example: * Internal number: G300206 * Purchase price: €32,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €515.29 * Residual value: €6,380.00 If you are interested in this offer or wish to customize it to your needs, please contact Mr. Enchev. We look forward to your call. Errors excepted. We are happy to consider your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 34,600 kg, overall weight: 39,300 kg, axle configuration: 3 axles, first registration: 09/2018, next inspection (TÜV): 01/2028, Year of construction: 2018, Internal vehicle number: G300448 German vehicle, in very good condition Available immediately at our yard in Kaufungen - Kassel For more INFO contact Luis Lucena 4 identical trailers available O.ME.P.S. CM27 – Ash, Slurry Year of manufacture: 2018 27,000 liters Empty weight approx. 4,220 kg Lifting axle Financing example: - Internal number: G300448 - Purchase price: €32,900.00 - Down payment: 10% - Term: 60 months Kdjdpox In Avefx Ah Nog - Monthly installment: €515.29 - Final installment: €6,380.00 If you are interested in this offer or would like it tailored to your needs, please contact Mr. Enchev. We look forward to your call. Errors excepted. We are happy to accept your used vehicle in part exchange. Financing available directly through us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----