Used Grecon for sale (33)

Condition: good (used), Year of construction: 1998, Optimizer GreCon Dimter OPTICUT 204 R - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum TECHNICAL PARAMETERS: - max. cutting length 4,000 mm - min. element 200 mm - max. cutting height 100 mm - max. cutting width 260 mm - disc diameter 500 mm - engine power 9 kW - feed speed max. 160 m / min - acceleration 2 m / s2 - optimization in terms of length and value - pneumatic pressure of the material - three ejectors - dump tables - Rotary table - total length of 2000 cm Transport dimensions: - length 1300 cm - width 245 cm - height 220 cm Hodpfx Adoh Hfknoaoh - weight 3500 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Finger jointing line Grecon ProfiJoint Year of production: 2014 Technical condition: very good Hodpfx Aexyq Nmjdaeh Technical data: Finished element length: 2100 mm For an additional fee, installation, start-up, and operator training are available. We also offer ongoing service.

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Hjdpfx Aewtgcxjdaoh Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Outut table 3 pcs. kickers on left outfeed table Total length: 15,50m Hjdpfxjt Ir Nqs Adaeh Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: good (used), Finger jointing line Grecon infeed cross buffer with packet formation 2 milling machines connected 600 mm table width each milling machine with glue rollers - automatic transfer - press pass endless - cross cut saw - outfeed roller conveyor with cross feed input length 500 - 4000 mm Hedpfeh I Dufsx Adajh Plant is dismantled and available at short notice Control is defective new control with program included not installed, program not tested

Condition: used, Year of construction: 2004, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 150/500 - CE - Wood entry length 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Wood exit length 3,000 - 6,100 - Press length 6100mm Hedewry I Eopfx Adaoh - Press force 105 kN - Milling unit motor 15Kw - Scoring unit 5.5Kw - Year 2004 CE

Condition: good (used), GRECON 3001 CROSS CUTTING OPTIMIZER A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI We also have all kind of Sawmill machines Hjdpfx Aeqzh Insdash

Condition: good (used), Type FEr LD 180/600/1000 Hsdpeuhtmisfx Adaoh 100% operational, automatic rotation

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s Hsdporf Ty Ssfx Adaeh transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Hsdpfou Atmuex Adash Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Technical characteristics Feeding belt 600 x 1500 1 finger jointing unit with rotating table on mobile carriage with reference Milling and double gluing roller Package 600 mm Max height 180 mm Lengths of wood 200 to 1000 mm Automatic transfer and overturning of finger-jointed pieces Pre-forking station Hydraulic roller press Cutting Hsdpfxsttdnao Adaeh Max length of wood 4500 mm Right side discharge on table Power and Motors Pluging: Three-phased Overall dimensions

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The Grecon Combipact wood joining line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short lengths of wood into longer pieces using finger jointing. Thanks to this process, it is possible to use wood waste to produce full-value structural elements, such as in beams, scantlings and panels. Technical data: 1. initial length of the elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2 Width of elements: Hedpfsuiz I Rsx Adajh - Minimum width: about 20-40 mm. - Maximum width: about 200 mm. 3. thickness of elements: - Minimum thickness: about 15-20 mm. - Maximum thickness: about 80 mm. 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm. 5 Capacity: - The production capacity is usually 5 to 15 joints per minute, which gives the ability to process up to 3000 mb/hour. 6. joint type: - Finger jointing, which is made with high precision, providing a durable and strong connection. 7. Press pressure: - Typically, a hydraulic press applies a pressure of several to several tons to effectively join the parts. 8 Control: - A PLC control system that provides process automation with the ability to set various parameters for joining wood. 9 Gluing: - Grecon Combipact lines are equipped with automated glue application systems that precisely dispense the correct amount of bonding agent. 10. power supply: - Standard power supply: 400 V, 50 Hz

Condition: excellent (used), operating hours: 10 h, functionality: fully functional, Grecon Dimter Ultra automatic wood joining line Machine after major renovation. Specification: Tenner: Sawheadstock: - Spindle speed: 3000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling headstock: - Shank diameter: Ø50 mm - Usable shank length: 210 mm - Max. tool diameter: Ø250 mm-Ø150 mm - Spindle speed: 6000 rpm - Milling motor: 15 kW / 3000 rpm - Chip extraction: Ø150 mm Feed table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Steplessly adjustable Dust extraction: Chipper exhaust port diameter: Ø100 mm Mill exhaust nozzle diameter: Ø150 mm Dust extraction capacity (flow rate): ~2400 m3/h Pneumatic system: Working pressure: 6 bar Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h) CONTI M 6/6000 longitudinal wood joining press: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6000+15-50 mm - Pressing force: 3 – 7.5 T (3 000 – 7500 daN) Circular saw: - Saw diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3000 rpm Dust extraction: - Saw exhaust nozzle diameter: Ø100 mm - Dust extraction efficiency (flow rate): ~400 m3/h Pneumatic installation: - Working pressure: 6 bar - Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h) Scope of renovation work: 1. Cleaning the machine bodies and applying new paint 2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts. 3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones; 7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press. 8. Regeneration of electromagnetic brakes on the tenoning machine 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones. 10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones. 11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones. 12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs 13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector; 14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams. 15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates. 16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines; 17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones. Hjdpfjuddvaox Adaoh We specialize in wood joining machines. Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Hsdpfx Adsign Efeash

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors Hjdpfen Hwl Aox Adajh with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system Hodpfewz H Anjx Adash 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table