Used Gildemeister Twin for sale (236)

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement. Rodpoxmd Txefx Aahow

Condition: used, Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, Manufacturer Gildemeister CTX 320 V5 Year of manufacture 2004 Condition: Used Control system: Siemens 840 D ShopTurn Operating hours: 60,000 h Spindle hours: 29,000 h Technical data: Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Spindle speed range - main spindle: 5000 rpm Spindle speed range - sub spindle: 5000 rpm Bar diameter: 65 mm C-axis: 0.001° Turret positions: 12 Tool holder: VDI 30 Driven tool stations: 12 Spindle speed of driven tools max.: 5000 rpm Rapid traverse X / Z: 60 / 45 m/min Total power requirement: 32 kVA Machine weight approx.: 4.3 t Space requirement approx.: 3895 x 2284 x 1885 mm Accessories/Equipment Chip conveyor Rodpezh Ewhsfx Aahsw Parts catcher Conveyor belt C-axis Driven tools Documentation --Used machine, no guarantee-- --Errors and prior sale excepted--

Condition: good (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, 1 used CNC lathe Manufacturer: Gildemeister Model: CTX 200 Control: Heidenhain Elekto Pilot 1190 Year of manufacture: 1997 Operating hours: approx. 38,000 hours Swinging diameter over bed: 440 mm Swinging diameter over slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5000 rpm Turret: 12 stations Tool holder: 20 VDI Redpfx Aaozh Ea Nshew Machine dimensions L x W x H: 2800 x 1651 x 1771 mm Machine weight: approx. 3000 kg Accessories: Coolant system Tailstock Documentation -- Used machine, no warranty -- -- Subject to prior sale and errors --

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm control CNC Pilot Heidenhain Rsdpfx Aezgw Tfeahow swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 diameter of quill 120 mm pressure max. 14 KN quill stroke 120 mm tailstock taper MT 5 total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady.

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Very good condition, machine comes from a school Rodpfx Ajzgupksahjw Operating hours: 14,000

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 Redpfx Aszhufhoahsw - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm Rjdpfjzggahox Aahow - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm Rjdpozgdk Djfx Aahow SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool positions 6 / 4 Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 SLIDE Y2 Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Bar loader: IEMCA BOSS

Year of construction: 2005, condition: ready for operation (used), A Gildemeister CNC lathe is available. Tool stations: 8, max. turning diameter: 350mm, max. swing diameter over bed/cross slide: 400mm/270mm, max. turning length: 650mm, travel X/Z: 220mm/700mm, rapid traverse: 15m/min, chuck diameter: 200mm. Machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 2800kg, control: Fanuc 10i, automatic operating hours: approx. 462h. Documentation available. An on-site inspection is possible. Redpfx Aaszhntfjhow

Condition: good (used), Year of construction: 2007, operating hours: 30,395 h, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, Counter spindle: 6,000 rpm, C-axis Turret: 12 stations Redpfx Aszf Hqkeahew Siemens 840D Powerline Counter spindle Y-axis Chip conveyor C-axis Driven tools Bar feeder

Condition: good (used), Year of construction: 1992, functionality: fully functional, turning length: 450 mm, turning diameter: 290 mm, spindle bore: 66 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 5,000 rpm, turning diameter over bed slide: 600 mm, Control system: EPL Country of origin: Germany Spindle bore: Ø65 mm Tool turret: 12 driven tool positions Rjdpfsy N Tdzjx Aahjw Tool holder: VDI 40 Tool speed: 3000 rpm Weight: approx. 4,700 kg + 600 kg control cabinet Chip conveyor: BMF Bürener Maschinenfabrik Bar feeder: GIOVANNI CUCCHI, type DB 70 Tools available at an extra charge There are a total of 6 machines with bar feeders available (price per machine with feeder). There is 1 machine without a feeder available (€6,500).

Condition: used, Gildemeister CTX600E Heidenhain CNC Pilot 3190 control system Equipped with powered tools. Distance between centers (TDC): 1000 mm Turning diameter above the bed: Ø 680 mm Turning diameter above the carriage: Ø 455 mm X-axis travel: 320 mm Z-axis travel: 1097 mm Turret: 12 positions Powered tools: Yes Tool holder: VDI 50 C-axis: Yes Main spindle power: approx. 30 kW Spindle speed range: 4 – 2800 rpm Spindle bore: Ø 107 mm Max. chuck diameter: 500 mm X-axis thrust: 8 kN Z-axis thrust: 15 kN Rapid traverse rate X: 24 m/min Rapid traverse rate Z: 30 m/min Loose headstock Tailstock diameter: 120 mm Tailstock stroke: 120 mm Rodezhgmkopfx Aahjw Taper: MK5 (6) Tailstock force: 14 kN Dimensions & weight Weight: approx. 9,000 kg Length: 4300 mm Width without screen: 2000 mm Width with screen: 2450 mm Height: 2200 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The displayed price does not include VAT (VAT can be reclaimed by businesses).

Condition: used, Multispindle lathe GILDEMEISTER GM16-6 Rsdpfxozhcp Uj Aahsw

Condition: good (used), Center height 260 mm Trestle holder MK 4 Quill stroke 100 mm This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Rodpferalkmox Aahow Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Rodpfx Aajvr Eh Eshew Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1999, NEF520 Redoy S Eu Repfx Aahow year of manufacture 1999

Condition: good (used), Year of construction: 2008, operating hours: 5,400 h, functionality: fully functional, Gildemeister CTX410 Control system: FANUC 32i Chip conveyor Redpfxezg T Hns Aahjw Coolant system Tool turret: 12 positions Documentation and export available for an additional charge. Inspection possible while the machine is powered on. We would be happy to send you further details or arrange an on-site inspection.

Year of construction: 2003, operating hours: 10,975 h, condition: used, total length: 4,500 mm, total width: 2,500 mm, total height: 2,300 mm, Colour: White Empty weight: 6.500 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes Rjdpfx Aaezd U A Sjhjw - CE certificate present: Yes - Serial number: - Operating hours: 10975 - Drive system: CNC - Control system brand: Siemens - Control system type: Sinumerik 840D SL - Power [kW]: 25.0 - Centre height [mm]: 340 - Swing over bed [mm]: 680 - Carriage turning diameter [mm]: 565 - Distance between centres [mm]: 600 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 0 - Max. spindle speed [rpm]: 5000 - Options: Chip conveyor, Three-jaw chuck - X-axis travel [mm]: 260 - Y-axis travel [mm]: 635 - Transport dimensions: 4500mm x 2500mm x 2300mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Redpfozd Tcwox Aahow Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor CNC turning center with 3 turrets and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, CNC turning machine GILDEMEISTER CLX 350 V3 With DMG MORI SLIMline Multi Touch Fanuc I series control Year of manufacture: 2018 Turning diameter: 320 mm Travel in X: 242 mm Travel in Z: 540 mm Spindle bore: 65 mm Speed range: 20 – 5000 rpm With the following accessories: Sliding safety shield with interior lighting 12-station turret with 12 driven tool stations VDI 30 Redpfx Aajzd Dlpjhew C-axis, tailstock with quill Programmable tailstock via M function Tool measurement in the work area Electronic handwheel Chip conveyor 3-jaw chuck, hydraulic, Schunk ROTA THW plus 0 210 mm Foot switch for chuck adjustment Parts catcher Glass scale in the X axis Coolant system with high-pressure pump 12 bar Coolant spray gun Operating manuals

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, CNC turning machine GILDEMEISTER CTX 510 ECOLINE With Siemens control Year of manufacture: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm With the following accessories: Sliding guard 12-station turret with 6 driven tool stations Tool measurement in the working area 3-jaw chuck, hydraulic, SMW Autoblock 0, 315 mm Foot switch for chuck, foot switch for tailstock Rjdpfx Aajzd Dczehow Various tool holders VDI 40 Signal light, 4-color Tailstock with quill Chip conveyor with coolant tank 4 machine feet Operating manuals

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Crosses slides, in position : 1,2,4,5 - Max. travel of transverse slides : 28 [mm] Rjdpfowvvrhsx Aahew - Max. travel of crossed slides : 45 [mm] - Max. travel of front spindles : 63 [mm] SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 400 - 6000 [rpm] - Spindle power : 15 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 31 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.300 [mm] - Machine height : 2.100 [mm] - Machine weight : 4400 [kg] EQUIPMENT - Double mechanical cut and return slide, in position : 6 - Rotary front spindles, in position : 1,2,3,4,5 - Parts catcher - Parts conveying strip - Bar waste chute - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/33/P - Bar holder and stand - Bar holder housing

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Crosses slides, in position : 1,2,4,5 - Max. travel of transverse slides : 28 [mm] - Max. travel of crossed slides : 45 [mm] - Max. travel of front spindles : 63 [mm] SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 400 - 6000 [rpm] - Spindle power : 15 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 43 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.100 [mm] - Machine height : 2.300 [mm] - Machine weight : 4200 [kg] EQUIPMENT Rodpfx Aewvvrbsahjw - Double mechanical cut and return slide, in position : 6 - Rotary front spindles, in position : 1,2,3,5 - Parts catcher - Parts conveying strip - Bar waste chute - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/31/P - Bar holder and stand - Bar holder housing

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] - Number of working hours : 10946 [h] Rsdpfx Aaju Habmohsw EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/42F - Bar holder and stand - Bar holder housing - Oil mist extractor : Donaldson

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] Redpfxju Habgs Aahjw COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Combing unit - Recessing : Push over - Parts catcher - Chips conveyor - Coolant tank - Bar loader : Pietro Cucchi - Oil mist extractor : Donaldson