Used Gildemeister Mf Sprint 65 for sale (4)

Condition: good (used), Year of construction: 1999, operating hours: 140,810 h, functionality: fully functional, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar feeder Annual maintenance by DMG, last service on 08.07.2024: - Linear guides, axial bearings, ballscrews and locking nuts renewed on X1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on X2 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z2 axis - All telescopic cover wipers replaced - Safety glass in work area door replaced - All feed timing belts as well as the counter spindle drive timing belt replaced - Tool drive 1 dismantled, disassembled, cleaned, and newly fitted with bearings - Main spindle fan filter mat replaced, coolant valves of turret 1 and 2 replaced - Main spindle and counter spindle chucks dismantled and cleaned - Machine geometry and work area remeasured and adjusted - Hydraulic filter cartridges replaced, pneumatic filter replaced - Technical data see attachment Machine can be inspected under power. Chodju Dg Ubepfx Adkoc Price: €25,000 negotiable The offer is subject to confirmation and non-binding. Changes and errors in technical data or specifications as well as prior sale reserved. Used machines are sold as seen, without any warranty claims. Delivery ex works, packaging and insurance exclusively unless otherwise agreed. Price is net plus legally applicable VAT. Payment to be made, as is customary for used machines, prior to loading.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Chsdpfx Aewym Nfodksc Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 1997, operating hours: 65,543 h, functionality: fully functional, machine/vehicle number: 501637, rotational speed (max.): 4,500 rpm, bar diameter: 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Bar loader: Irco RBK 7212, built in 1999 Bar length: 1 m Bar diameter/spindle bore: 65 mm Spindle Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck Main drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool carrier Number of tools: 8 Shank diameter according to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool carrier 1 speed: max. 4,000 rpm Tool carrier 2 speed: max. 4,000 rpm Slide 1 Transverse travel / Longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X: 15 × 25 mm Thread spindle pitch Z: 15 × 32 mm Slide 2 Transverse travel / Longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X/Z: 15 × 25 mm MACHINE DETAILS Operating hours: 65,543 h Dimensions including bar feeder and chip conveyor (LWH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Holder for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - Including 2 tool holders Codpfxjwkp Ifs Adkehc

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 501628, spindle speed (max.): 4,500 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 280 mm, bar diameter: 65 mm, spindle diameter: 79 mm, Machine package: 2 machines = 1 x functioning machine + 1x spare parts carrier TECHNICAL DETAILS Bar diameter (normal): 65 mm Main spindle Spindle head (flat flange): 140h5 mm Spindle bore diameter: 79 mm Clamping tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% ED): 28 / 21 kW Codpfx Aevviwxodkshc Speed range: 25 - 4,500 rpm Maximum torque (40%/100% ED): 320 / 240 Nm Path speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Face path/longitudinal path: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X): 15 x 25 mm Threaded spindle pitch (X Ø Z): 15 x 32 mm Slide 2 Face path/longitudinal path: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X/Z): 15 x 25 mm Tool carrier Number of tools: 8 Tool holder: Shaft Ø according to DIN 69880 Number of driven tool stations: 4 Power max. (40%/100% ED): 7.6 / 4.6 kW Max. torque (40%/100% ED): 24 / 14.7 Nm Max. speed (tool holder 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle head diameter (flat flange): 120 mm Positioning device: stepless pitch MACHINE DETAILS Total length (with chip conveyor): 3,500 mm Total height (with control cabinet): 1,625 mm Total width (with control cabinet): 1,750 mm Weight of the machine including control cabinet: 5,000 kg Weight of the integrated bar loading magazine: 900 kg Hydraulics Contents: 9.8 l Pump power: 1.1 kW Coolant system Contents: 160 l Pump power: 1.65 kW Discharge rate at 8 bar: 25 l