Used Gildemeister Ctv 160 for sale (238)

Condition: good (used), Year of construction: 2001, turning diameter 320 mm turning length 750 mm control Heidenhain Manual Plus Number of working hours 18632 h longitudinal slide -travel 8/5000 mm face slide travel 8/5000 mm/min rapid travel - longitudinal/face 8-10 m/min power feed longitudinal 6000 N power feed coss 3000 N weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m Working Area: - Center height — 160 mm - Center distance — 750 mm - Max. swivel diameter over bed — 320 mm - Max. swivel diameter over cross slide — 150 mm Work Spindle: - Spindle head DIN — 55027 - Size — 6 - Internal taper — MK6 - Spindle diameter at front bearing — 85 mm - Spindle bore — 52 mm - Max. chuck diameter — 200 mm - Max. torque — 420 Nm Support: - Tooling system — Multifix - Tool cross-section — Size B - Number of bed slides — 1 - Number of cross slides — 2 - Longitudinal stroke — 700 mm - Cross slide travel — 185 mm Tailstock: Hjdpfx Agozp Rw Astjfl - Quill taper — MK5 - Quill diameter — 70 mm - Max. quill travel (manual / automatic) — 120 / 8 mm --> Footprint — 2540 mm × 1690 mm

Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110 Hfedpfex Tg T Rsx Agtsl

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T Hedpsqn A Rgefx Agtofl 2 toll turrets 2 x 12 tool taper HSK 63 frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Combing unit - Recessing : Push over - Parts catcher - Chips conveyor - Coolant tank - Bar loader : Pietro Cucchi Hfedpfx Agsu Habgjtol - Oil mist extractor : Donaldson

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Machine weight: 3,500 kg Hfodpfx Asymw Iqsgtjl EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Hinged belt chip conveyor

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Hodpfowh U D Hex Agtjfl Speed 5,000 min-1 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Bar loading magazine IRCO Profimat

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Hfedpfx Agsvgb Epetel Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *

Condition: ready for operation (used), Year of construction: 2002, operating hours: 63,040 h, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine configuration Upper linear slides: 2 units Milling unit: 1 unit Transverse drilling units: 2 units Hedpjzrgnpefx Agtsfl Rigid front spindle: 1 unit Machining units Drum 6: Movable only in the X-axis Front position 1: Rotationally rigid spindle, movable only forwards and backwards Front positions 2 to 4: Rotationally fully controllable spindles Front position 5: Internal machining axis for processing internal contours and radii Front position 6: Driven indexing spindle with rear machining slide and two tools, movable towards the viewing side Full electronic equipment Electronically connectable auxiliary drives on the front positions and six drum slides MACHINE DETAILS Operating hours: 98,119 h Spindle hours: 63,040 h EQUIPMENT Chip conveyor High-pressure coolant unit Bar loader Milling unit Two transverse drilling units Collets Spare parts Electronic components for the control cabinet New rigid front spindle

Year of construction: 2002, condition: ready for operation (used), Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h. Hfjdpfetufbyox Agtsl

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: Hodpfx Agex Sx Htstefl 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Hfodpfxjq T I Izj Agtjl Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Hjdpfx Ajx Uq Uhogtsfl

Condition: used, TECHNICAL DETAILS - Spindle number : 6 - Max. bar diameter : 20 [mm], 25 [mm] in option - Cross slides number : 4 - Max. supply length : 100 [mm] - Spindle rotation speed : 420 - 5000 [Rpm] - Indexing time : 0,7 [s] - Machining time : 1,4 - 60 [s] - Power : 11 [kW] - Dimensions : 5800 x 1500 [mm] - Weight : 6000 [kg] EQUIPMENT - 4 cross slides posts 1 2 4 5 Hodpfxouharrs Agtefl - 1 chip conveyor - 5 drillers - 1 IEMCA PRA41/31/P feeder DBMS-36 (1995)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW Hfodpfx Agsyvz Ibotsl • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar • Clamping pressure tailstock: 50 bar

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES Hjdpfx Agju Habmjtefl * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] - Number of working hours : 10946 [h] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/42F - Bar holder and stand - Bar holder housing - Oil mist extractor : Donaldson

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT Hodpju E U Ufofx Agtjfl - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,176 h, functionality: fully functional, machine/vehicle number: 02260007541, turning length: 600 mm, turning diameter: 680 mm, spindle speed (max.): 5,000 rpm, controller model: Siemens 840 D, power: 25 kW (33.99 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hfodozpxgfjpfx Agtol Turning length: 600 mm Turning diameter: 680 mm Maximum spindle speed: 5,000 rpm MACHINE DETAILS Control system: Siemens 840D Spindle power: 25 kW Spindle operating hours: 65,176 h EQUIPMENT Chip conveyor Self-centering chuck: 250 mm diameter

Condition: used, GILDEMEISTER GM35 AC MULTISPINDLE LATHE WITH PIETRO CUCCHI LOADER We can offer a lathe and loader overhauled as new with CE certificate Hjdpfx Agewrpb Iotofl

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Hedpfx Ajza E Sqegtofl

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Crosses slides, in position : 1,2,4,5 - Max. travel of transverse slides : 28 [mm] - Max. travel of crossed slides : 45 [mm] - Max. travel of front spindles : 63 [mm] SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 400 - 6000 [rpm] - Spindle power : 15 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 43 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.100 [mm] - Machine height : 2.300 [mm] - Machine weight : 4200 [kg] EQUIPMENT - Double mechanical cut and return slide, in position : 6 - Rotary front spindles, in position : 1,2,3,5 - Parts catcher - Parts conveying strip - Bar waste chute - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/31/P - Bar holder and stand Hedpfjwvvrbex Agtsfl - Bar holder housing

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hfsdpfeyutrujx Agtel If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Hedow Tl Ifspfx Agtefl

Condition: ready for operation (used), operating hours: 31,819 h, turning diameter over cross slide: 290 mm, turning length: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 645 mm, rotational speed (max.): 5,000 rpm, - CNC lathe with EPL 2 control, equipped with round magnet. It was last used for fine contour turning of hardened components. (without chuck, tailstock and chip conveyor) Technical data Swing diameter over bed: 300 mm Swing diameter over face: 290 mm Travel path X: 210 mm Travel path Z: 645 mm Speed range: 25 - 5000 rpm Hsdpfx Agoqcu Uvetefl Tool carrier: universal disk turret Tool positions: 12 Tool holder: 30 mm (DIN 69 880)

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Crosses slides, in position : 1,2,4,5 - Max. travel of transverse slides : 28 [mm] - Max. travel of crossed slides : 45 [mm] - Max. travel of front spindles : 63 [mm] SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 400 - 6000 [rpm] - Spindle power : 15 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 31 [kVA] WEIGHT & DIMENSIONS Hedpfxjwvvrho Agtefl - Machine floor space : 3.800 x 1.300 [mm] - Machine height : 2.100 [mm] - Machine weight : 4400 [kg] EQUIPMENT - Double mechanical cut and return slide, in position : 6 - Rotary front spindles, in position : 1,2,3,4,5 - Parts catcher - Parts conveying strip - Bar waste chute - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/33/P - Bar holder and stand - Bar holder housing

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, Equipment: bar feeder, chip conveyor, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Maximum power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Rapid traverse (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Nominal force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Rapid traverse (max.): 40 m/min Hedpsy Dr S Hsfx Agtofl Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS Control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on hours: 85,620 h Operating hours: 27,896 h EQUIPMENT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Central lubrication - Hand-held control unit - Documentation available