Used Gildemeister Ct 20 for sale (250)

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Cedpeq T I Izjfx Agrjhd Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: excellent (used), Year of construction: 2005, Gildemeister GLD25 Chjdpfx Aszvpaijgrod Machine in very good operating condition. It can be inspected at any time during production. Only 10,800 operating hours.

Condition: excellent (used), Year of construction: 2004, operating hours: 19,176 h, functionality: fully functional, machine/vehicle number: 2301-0160, Gildemeister Sprint 32 linear, serial number 2301-0160, year 2004. 2 x 4 = 8-axis configuration + rotary table + tool magazine. Codpfx Aozxntasgrohd 8,000 RPM on both spindles. Operating hours: 19,176 / 15,274.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Siemens 840D control unit, Chsdpo Agbx Sofx Agred 8-position turret, VDI30 tool holder, tailstock, jaw chuck, extensive accessories.

Condition: good (used), Maximum height: 260 mm Tailstock taper: MK 4 Quill travel: 100 mm Csdpfx Asralkmegrjhd This hydraulic tailstock comes from a CNC inclined-bed lathe, GILDEMEISTER CT 40. Image is similar. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 8086010539B, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, spindle bore: 46 mm, type of input current: three-phase, bar passage: 42 mm, bar diameter (max.): 42 mm, overall weight: 4,700 kg, DMG Gildemeister Sprint 42 linear CNC turning center with FANUC 160i control and IEMCA Boss 545-E bar feeder. The machine is a compact and productive CNC twin-spindle turning center for the series production of bar stock parts up to 42 mm in diameter. Thanks to its main spindle, counter-spindle, 6 linear axes, 2 channels, and powered tools, the machine is particularly suitable for precise turning, drilling, milling, and complete machining operations in medium to high volumes. The machine is available including the bar feeder and chip conveyor. On-site inspection is possible by arrangement. Machine data: Manufacturer: DMG / Gildemeister Italiana Model: Sprint 42 linear Machine No.: 8086010539B Year of manufacture: 2008 Control: FANUC 160i User interface: DMG SlimLine / TFT 15" Spindles / C-axes: 2 Number of axes: 6 Number of channels: 2 Max. bar diameter: 42 mm Main spindle max. speed: 6,500 rpm Counter spindle max. speed: 6,500 rpm Installed power: 40 kVA Operating voltage: 400 V / 50 Hz Base machine weight: approx. 4,700 kg Travel distances: X1: 65 mm Y1: 350 mm Z1: 120 mm X2: 265 mm Y2: 326 mm Z2: 320 mm Spindle data: Main spindle: Max. bar diameter: 42 mm Guide bushing bore: 46 mm Max. speed: 6,500 rpm Nominal power: 5.5 kW Nominal torque: 37.5 Nm Counter spindle: Guide bushing bore: 38 mm Max. speed: 6,500 rpm Nominal power: 3.7 kW Nominal torque: 19.6 Nm Bar feeder: Manufacturer: IEMCA Model: Boss 545-E Type: 32 LL Year of manufacture: 2007 Serial No.: 020722GA10 Weight: approx. 860 kg Voltage: 400 V / 50 Hz Compressed air: 6 bar Weight: 860 kg Location: Bocholt Chedpfxjzkh Iue Agred Availability: immediately available Inspection: possible by arrangement Loading / Transport: for collection

Condition: used, Year of construction: 2011, pricing can only be given out if you send me an email writing your email address. As machine seeker encrypts your email address. MACHINE: GILDEMEISTER CTX Alpha 300 V3S YEAR: 2011 SERIAL NUMBER: 00400003392 CONTROL: Siemens Sinumerik 840D sl ShopTurn ERGOline MACHINE TYPE: CNC Turning Center with C-Axis and Live Tooling CAPACITY: Maximum Turning Diameter: 200 mm Maximum Swing Diameter: 500 mm Maximum Turning Length: 300 mm Bar Capacity: 51 mm MAIN SPINDLE: Spindle Nose: A2-5 Chuck Size: 165 mm Hydraulic 3-Jaw Chuck Spindle Bore: 65 mm Maximum Spindle Speed: 6,000 rpm Spindle Motor Power: 16.5 kW (100% duty) 25 kW (40% duty) Maximum Spindle Torque: 192 Nm AXES: X-Axis Travel: 190 mm Z-Axis Travel: 335 mm Rapid Traverse X: 30 m/min Rapid Traverse Z: 30 m/min TURRET: Turret Type: VDI 30 Number of Stations: 12 Live Tool Stations: 12 Maximum Live Tool Speed: 5,000 rpm Live Tool Power: 3.7 kW C-Axis Resolution: 0.001° TAILSTOCK: Hydraulic Tailstock (optional depending on machine configuration) COOLANT SYSTEM: Flood Coolant Cjdpozd R S Aefx Agrehd Chip Conveyor Compatible ACCURACY: Positioning Accuracy: ±0.005 mm Repeatability: ±0.003 mm ELECTRICAL: Power Requirement: 400 V / 50 Hz / 3 Phase Connected Load: Approx. 30 kVA DIMENSIONS: Length: 4,260 mm Width: 2,510 mm Height: 1,825 mm MACHINE WEIGHT: Approx. 4,000 kg

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. Chsdpfx Agezkgqzorod If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm Cjdpjzxhmaofx Agrshd - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Speed of powered tool: 4,000 rpm - Both turrets with internal cooling - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3200 mm Dimensions L x W x H: - Machine: 3400 x 1700 x 1800 mm - Bar feeder: 4000 x 1000 x 1400 mm - Chip conveyor: 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 90,842 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 555 mm, total height: 1,950 mm, total width: 2,220 mm, overall weight: 6,500 kg, product length (max.): 4,770 mm, number of axes: 6, This 6-axis Gildemeister MF twin 65 turn-mill centre was manufactured in 2001. It features a swing diameter of 240 mm and a normal turning diameter of 200 mm. The machine offers a spindle distance of 800 mm and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister MF twin 65 turn-mill centre we have for sale. Contact us for further details. TECHNICAL SPECS:- Bed Design: 45° slant bed, roller guide ways- Swing Diameter: 240 mm- Normal Turning Diameter: 200 mm- Spindle Distance: 800 mm- Slide 1 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 2 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 1 Y-Axis Travel : 40 mm- Spindle 2 Longitudinal Travel: 600 mm- Main Spindle 1 (Left): - Chuck Diameter: 200 mm - Max Bar Capacity: 65 mm - Spindle Head Flat Flange: 170 h5 - Spindle Bore: 79 mm - Draw Tube Inner Diameter: 66 mm - Front Bearing Diameter: 120 mm - Drive Power (40/100% ED): 28 / 21 kW - Speed Range: 25 - 5000 rpm (min⁻¹) - Knee Speed: 850 rpm (min⁻¹) - Max Torque (40/100% ED): 320 / 240 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 200 Nm - C-Axis Indexing Accuracy: 0.025°- Counter Spindle / Main Spindle 2 (Right): - Chuck Diameter: 200 mm - Max Bar Capacity: 42 mm - Spindle Head Flat Flange: 140 h5 - Spindle Bore: 56 mm - Draw Tube Inner Diameter: 44 mm - Front Bearing Diameter: 90 mm - Drive Power (40/100% ED): 18 / 14 kW - Speed Range: 31 - 6300 rpm (min⁻¹) - Knee Speed: 1000 rpm (min⁻¹) - Max Torque (40/100% ED): 130 / 173 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 120 Nm - C-Axis Indexing Accuracy: 0.025°- Slide 1 (Upper): - Rapid Traverse X/Z: 20 / 30 m/min (without Y-axis) or 20 / 7.5 / 30 m/min (X/Y/Z with Y-axis) - Feed Force X/Z: 4 / 7 kN - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm (without Y) or 12x28 / 5x32 / 15x32 mm (with Y)- Slide 2 (Lower): - Rapid Traverse X/Z: 20 / 30 m/min - Feed Force X/Z: 4 / 7 daN (kN) - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm- Slide 3 (Spindle 2 Z-Movement): - Rapid Traverse A: 30 m/min - Feed Force A: 7 kN - Path Resolution A: 0.001 mm - Ball Screw Pitch x Diameter: 15x32 mm- Tool Turrets (Upper and Lower): - Number of Tool Stations: 2 x 12 - Tool Shank Diameter (DIN 69880 / VDI): 30 mm - Driven Tool Stations: 2 x 12 - Driven Tool Power (40/100% ED): 5 kW - Driven Tool Max Torque (40/100% ED): 16 Nm - Driven Tool Speed Range: 40 - 4000 rpm (min⁻¹)- Electrical Data: - Voltage: 400 V (3-phase, 50 Hz) - Connected Load: 65 kVA - Rated Current: 95 A - Back-up Fuse: 100 A - Auxiliary Voltages: 230 V / 24 V=- Hydraulics System: - Tank Capacity: approx. 25 L - Pump Power: 2.2 kW - Max System Pressure: 80 bar - Clamping Device Pressure: 80 bar- Coolant System & Filtration: - Tank Capacity: 200 L - Pump Power: 1.65 kW - Delivery Volume at 6 bar: 50 L/min - Equipped with band/paper filtration unit- Machine Dimensions & Weight: - Total Length (with Chip Conveyor): 4770 mm - Total Depth (with Electrical Cabinet): 2220 mm - Total Height (with Electrical Cabinet): 1950 mm Cedpfxj Agvbqe Agrohd Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Codpfjwym Nfsx Agrehd Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Chodpoz A Tbujfx Agrsd Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Cjdszhufhepfx Agrjhd Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Cedpfe Aawrlex Agrohd Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2024, Gildemeister 42ACF: is an automatic multi-spindle lathe designed to meet the demands of high-efficiency production. This model stands out for its versatility, capable of machining workpieces up to 42 mm in size with equal ease and precision. The 42ACF lathe offers a number of features that make it particularly easy to use. These include intuitive programming via a SIEMENS operator panel that makes it easy to set and change spindle rpm, cycle time and threading speed. Technical data: ● Number of spindles: 6 ● Maximum bar diameter: 42 [mm] ● Hexagonal wrench: 36 [mm] ● Cross bars : 4 (pos.1-2-4-5) Chedpfxerpniqo Agrod ● Maximum feed length : 130 [mm] ● Main spindle speeds : 400- 4000 [rpm] without threading ● Travel time: 1-1.5 [s] ● Cycle time: 2 to 90 [s] ● Power: 22 [KW] The Gildemeister 42ACF, on the other hand, is a multi-spindle lathe that targets highly specialized industries where precision and accuracy are imperative.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, CNC universal lathe GILDEMEISTER NEF 600 V 3 Cjdpj Aa Ag Usfx Agrohd With Siemens 840 D control system Year of manufacture: 2009 Swing over bed: 600 mm Swing over cross slide: 410 mm Spindle bore: 90 mm Travel in X-axis: 320 mm Travel in Z-axis: 1250 mm Maximum spindle speed: 3000 rpm Including the following accessories: Sliding guard with internal lighting 12-station turret VDI 40 with 6 driven stations Various VDI 40 tool holders Tailstock with quill Collet chuck Hainbuch with 2 collets Foot switch for collet adjustment Coolant spray gun Coolant system Chip tray Operating manuals

Condition: used, Multispindle lathe GILDEMEISTER AS 32 Csdpfx As Afz Smsgrshd

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Chodpsyx U Slsfx Agrjd

Condition: good (used), Year of construction: 2002, machine/vehicle number: 04780000061, spindle motor power: 45 W, travel distance X-axis: 605 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,470 mm, overall weight: 22,000 kg, Gildemeister TWIN500 Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Counter spindle: 45 kW, 320 rpm Travel ranges: X-axis: 605 mm Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Turning/milling spindle: HSK 63, 12000 rpm X-axis: 267 mm Chedpozymviofx Agrod Z-axis: 1440 mm Tool magazine: 80 positions Machine Condition : Functional, good.

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Csdpsxrg S Iofx Agrehd Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock : Tailstock travel: 1150mm

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Cedpfx Agoyz Sdqershd Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: used, CNC lathe GILDEMEISTER SPRINT 42 Linear Chsdpfx Agjz I Uutored

Condition: good (used), Year of construction: 2004, Number of spindles: 8 Maximum bar feed in one station: 130 mm Maximum bar feed in two stations: 260 mm Maximum stroke of radial slide: 52 mm Adjustment of radial slide: +/- 12 mm Maximum stroke of axial slide: 72 mm Maximum stroke of tool spindles: 106 mm Adjustment of tool spindles: +/- 10 mm Speed of main spindles: 500 - 4,000 rpm Codpfxow Rfcdo Agrshd Cycle time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg Bar loader: PIETRO CUCCHI (standard)

Condition: good (used), Year of construction: 2007, operating hours: 49,000 h, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Cjdpsxdih Njfx Agrjhd Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: defective spare-parts repository (used), Year of construction: 2003, machine/vehicle number: 07400001041, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach TWIN 102 Year of manufacture: 2003 Siemens 840 D Powerline Main spindle 33 KW, 3200 1/min Counter spindle 21 KW Travel distances: Saddle 1 X-axis 300 mm Y-axis 80 mm Z-axis 600 mm Turret, 12 positions, VDI 30, 12 driven Saddle 2 X-axis 180 mm Z-axis 650 mm Turret, 12 positions, VDI 30, 12 driven Saddle 3 X-axis 175 mm Z-axis 670 mm Tailstock Cjdozn H D Aepfx Agrohd Known faults: Z3-axis defective