Used Gantry Loader for sale (4,397)

Condition: used, Year of construction: 2012, operating hours: 7,000 h, Equipment: all wheel drive, New Holland B115C (C-series, approximately manufactured in 2012) 110 hp Very good condition Ibsdpfx Ahjxnvlveyjc

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove Ibedpjz S R R Hofx Ahyec * Screen-printed top layer with flush outer frame Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Year of construction: 1984, condition: used, 1x Wimag gantry crane Isdpfx Ahjyx Ercoysbc Load capacity: 20,000 kg Span: 16 m (adjustable to 12 m in 500 mm increments) Outreach: 0 m Lifting height above rail: 7.5 m Hook travel: 25 m Radio remote control Cable reel suitable for 40 m

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. Ijdpfsz Atdrex Ahyobc With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: used, operating hours: 5,745 h, lifting height: 4,000 mm, free lift: 2,010 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, fork width: 1,140 mm, total height: 2,820 mm, total length: 4,400 mm, total width: 2,030 mm, color: red, Year of manufacture: 2015 Empty weight: 6.800 kg Lifting capacity: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: VS517 - Operating hours: 5745 - Lifting capacity: 4000kg - Lifting height: 4000mm - Overhead clearance: 2850mm - Free lift: 2010mm - Fork length: 1200mm - Maximum fork width: 1140mm - Minimum fork width: 290mm - Options: Work lights, Free-lift, Full cabin Ibjdpfx Ahjy Ivxreyjc - Mast: Duplex - Drive: Diesel - Motor brand: JCB - Driving direction: 2 Road - Transport dimensions: 4400mm x 2030mm x 2820mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, axle configuration: > 3 axles, first registration: 02/1997, suspension: hydraulics, tire size: 245/70R17.5, wheelbase: 10,670 mm, color: red, Year of construction: 1997, Equipment: ABS, Nooteboom MCO 58-04V 4 x steering axles. 2 x Extendable: 1340 cm. BPW axles. Distance from kingpin to end of trailer: 1200 - 2540 cm. = Further Information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tires; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Ibedsw Dtlhepfx Ahysc Rear axle 2: Twin tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 3: Twin tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80% Rear axle 4: Twin tires; Steered; Tire tread depth left inner: 20%; Tire tread depth left outer: 20%; Tire tread depth right inner: 20%; Tire tread depth right outer: 20% Weights Unladen weight: 15,980 kg Payload: 38,020 kg GVWR: 54,000 kg Identification Model number: MCO-58-04V / 2 x EXTENDABLE / ST = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 2017, operating hours: 1,409 h, Equipment: all wheel drive, Now available: Claas 535 Torion, identical to the Liebherr L506 Compact We are pleased to offer you the Claas 535 Torion with excellent special equipment. Condition: New Ijdpfxsz S S I To Ahyobc Availability: Immediately from stock. Why Zirndorfer-Maschinenpark? Official dealer for Bobcat & XCMG * Family-owned business with over 45 years of experience * Our own workshop for guaranteed quality * Large selection of new and used machines Financing, leasing, or hire purchase? No problem – we will find the right solution for you through our partner banks. Would you like to trade in your used machine? We will gladly accept your machine in part exchange under fair conditions. Attachments and accessories? We will be happy to offer additional attachments and suitable accessories on request. Sale to EU or non-EU countries? We will handle the process for you. Machine equipment: * Hydraulic quick coupler * Rear hydraulics * Snow blade * Salt spreader * Three-point linkage at the rear * Bucket & pallet fork * Air conditioning * Recently serviced * Year of manufacture: 2017 * Model year: 2018 * Operating hours: 1409 Trust in the experience of a third-generation family business. Zirndorfer-Maschinenpark e.K. – Your partner for construction machinery. Contact us now and secure your individual offer. Legal notice: The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, or data transmission errors. Subject to change.

Condition: like new (used), functionality: fully functional, Year of construction: 2003, operating hours: 2,346 h, load capacity: 5,000 kg, lifting height: 4,900 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,550 mm, motor manufacturer: Perkins, fork length: 1,200 mm, tire condition: 70 %, empty load weight: 8,400 kg, total height: 3,550 mm, total length: 4,100 mm, total width: 2,000 mm, maximum load weight: 5,000 kg, tire size: 8.25x15, fuel: diesel, Equipment: cabin, lighting, pallet forks, The Linde S50 is in like-new condition. It has only 2346 operating hours. Ibodpfx Ahez Rzkujysc We sell forklifts after they have undergone a complete service. They are prepared for the end user. They are ready for immediate use. We can arrange transportation within Europe and worldwide.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 Ijdpjy Av H Sofx Ahyebc • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 07/2013, * Unladen weight: 780 kg * TÜV inspection expired Iodpfxjz Sixqs Ahyebc * Loading ramp * Tires: 185 R14 LT -----Internal vehicle number: 11443----Errors and prior sale excepted.

Condition: used, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, empty load weight: 5,500 kg, Year of construction: 2008, operating hours: 3,000 h, drive type: Diesel, load capacity: 1,800 kg, Wheel loader Condition: Ready for use and fully functional Iedpfjz Rtf Rex Ahyebc Technical condition: good Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Description: JCB 2CX Airmaster – Year of manufacture 2008 – 3000 operating hours – 3-cylinder JCB diesel engine, 50 kW – 4-wheel drive – Cabin – Heater – Lighting system – Additional hydraulics up to the fork carrier, 3rd valve – with folding bucket – Front tires 80% – Rear tires 80% – good condition – Air compressor at the rear 3rd valve, heater, full cabin.

Condition: used, maximum speed: 100 km/h, Equalising block for low-bed semi-trailer Dimensions – see photos ##### PLEASE CALL – NO EMAILS! Iodpfxez Sx A Rj Ahyobc #####

Condition: ready for operation (used), We are selling a forklift manufactured by Crown. We would be happy to provide you with further information. An on-site inspection is also possible. Please do not hesitate to contact us! Isdpfez Si U Eex Ahyebc

Condition: used, maximum load weight: 17,740 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2016, Equipment: ABS, Müller-Mitteltal T3 Profi 30.0 3-axle, hydraulic ramps, twin tires, BPW axles, extendable, drum brakes, ABS. Ibedpfx Asz Shvnehysc Payload: 17,740 kg

Condition: used, Year of construction: 1999, operating hours: 7,835 h, load capacity: 3,000 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Forklift A 30 U Unladen weight: 4,100 kg Runs on LPG and petrol Very good condition Sideshift Trade-in + exchange possible Would you like to trade in your used vehicle or exchange it? We are happy to purchase your old vehicle at market price. Please send us the vehicle details by email or call us. Registration service: We are happy to assist you with the application for temporary license plates and export plates. Despite careful data collection and vehicle assessment, there may be discrepancies in equipment data, scope of delivery, and technical specifications. The information is provided to present the vehicle and is non-binding. Iodpfx Ahjulltweyjbc Interim sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in terms of contract law. The description in the purchase agreement is decisive.

Condition: used, Year of construction: 2016, operating hours: 7,034 h, Equipment: all wheel drive, Volvo L 60H Year of manufacture 2016 Iedpowd Dv Defx Ahyebc Operating hours approx. 7034 hours Air conditioning Camera & radio Perm. total weight 13,600 kg Power 122 kW / 166 HP

Condition: used, axle configuration: 3 axles, first registration: 02/2001, total length: 13,350 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2001, Total length: 1334 cm + 1950 cm. Loading bed length: 915 cm + 1950 cm. Loading height: 100 cm. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Rear axle 2: Twin tires; Steerable; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 3: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Weights Unladen weight: 15,650 kg Payload: 29,350 kg GVW: 45,000 kg Identification Model number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 Ibedpfx Aeycf Htjhyoc = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, empty load weight: 10,860 kg, maximum load weight: 37,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Rubber surface, two-part ramp with grating, ramps spanning the entire width, electro-hydraulic pump for ramps or connection to the truck's hydraulic system. -- Subject to printing errors, errors and changes. Sample images. -- More details can be found at: !, More Details: ! Ibsdjz Syfyopfx Ahyjc

Condition: used, Year of construction: 2016, operating hours: 11,800 h, / New hydraulic pump. Driving motor. Ijdpsz Sv Anefx Ahyjbc Equipment: Quick-change system.

Condition: used, all stainless steel suitable for eurobins of 200L discharging height : ± 1.000 mm mobile dimensions (l x w x h) : ± 1.300 x 1.000 x 1.250 mm Isdpfjz Rnyijx Ahyjbc

Condition: used, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2019, Equipment: ABS, Low loader Lecitrailer Newly built Top condition Iedeullltjpfx Ahyobc

Condition: good (used), Hidromek HMK 635WL-5 This machine is a very durable and robust model, roughly the same size as a Volvo L120 or CAT 950. The wheel loader is equipped with: Engine: Mercedes-Benz MTU6R1000 Weight: 20,600 kg ABL large BM attachment 3rd hydraulic circuit Joystick control Lock-up torque converter Load arm suspension Boom automation Bucket automation Power shift transmission Auto kick-down 1-4 ICCO disengagement Electric mirrors/heating Central lubrication system Rearview camera Smartlink Favorable financing options are available! Iodpfsz Rp Syex Ahyobc GT trading is the importer of Hidromek and Airman machines in Sweden. We always have used construction machines in stock and are currently looking for used Cat and Volvo machines. Visit us: Ullevivägen 30, Bro, Stockholm Borrvägen 12, Nacksta, Sundsvall Contact us for more information! Josef Said: Henrik Törnblom: 00 39 Technical data: Year of manufacture: 2023 Weight: 21,000 kg Engine type: Diesel Location: Bro, Stockholm County, Sweden

Condition: used, first registration: 05/2003, loading space length: 6,379 mm, loading space width: 2,454 mm, loading space height: 39 mm, * BPW axles * 50mm tow hitch * Loading ramp * Tire size: 235 / 75 R 17.5 * Technical total weight: 18,000 kg * Tare weight: 4,450 kg Ibodpfoyl Rhbjx Ahysc * Overall length: 8,420 mm Vehicle number: 11602 Errors and prior sale excepted. Advertisements and various lettering have been digitally removed. We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. We can offer you the following services for an additional charge: - Trade-in of your old vehicle - TÜV/SP inspection - Complete export processing - Arranging financing - Applying for export license plates - Vehicle transportation - Vehicle registration - Recovery and vehicle transport ?YOUR VTS TEAM

Condition: used, empty load weight: 7,000 kg, maximum load weight: 23,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2021, loading space length: 8,100 mm, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading platform length approx. 8,100 mm, loading height approx. 890 mm, lashing rings, -- misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Ibedpsz Sx Tvsfx Ahyoc

Condition: used, empty load weight: 4,040 kg, maximum load weight: 14,960 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 6,880 mm, suspension: other, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Ijdpfx Asz Syfmjhysbc