Used Frying Pan for sale (3,884)

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz Kdjdsgd Uifepfx Ah Est with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. Kjdpfsq H Sqdsx Ah Eodt The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Kdodpfxjqt Dmye Ah Eet Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, APPC1740T-WL-B 17" Panel PC SN:TABI11000223 Manufacturer unknown, unused in opened original packaging, 100% functional, scope of delivery as per photos Kdjdpfx Ajp Ilk Sjh Ejt

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Gossen, control plug-in cards circuit boards -Switching regulator card: Constant S83 S5 EU 12 -Plug-in card: 7204-6072C0 -Temperature controller card: Gossen Pantatherm DS 4 4400-S 8 pieces -Individual components: see photos Kedpfxenah Drj Ah Eedt -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 5.2 kg

Year of construction: 2001, condition: like new (used), Filter area: 22 m²# Nominal volume flow: 4700 m³/h Minimum flow rate: 3530 m³/h External pressure suction port at V min.: 2450 Pa Sound pressure level max.: 69 dB Suction nozzle Ø: 250 mm Suction engine speed: 3000 rpm Motor: 400V 5.5KW Required space: 2520 x 900 x 1963 mm Weight: 730 kg Kodpfx Ahjk Tahze Esdt

Condition: like new (used), machine/vehicle number: 122, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r 22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions: Internal length approx. 5,100 mm Internal width approx. 2,420 mm Overall width max. 2,550 mm Unladen loading height approx. 1,510 mm Frame: Central axle steel frame welded structure in lightweight construction with optimized weight with tilting supports and rear tilting axle; Plug-in locking system for tipper body with cross-locking Tow hitch: Curved drawbar with height-adjustable heavy-duty screw coupling eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support system: At the front, 1 mechanical support winch with crank handle on the left in the direction of travel, manufacturer according to factory specifications, 1 step-up bracket bolted on Axles: BPW-EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road version, automatic brake linkage adjuster 2 axles Axle spacing 1,310 mm Without axle lift Wheels: 4 tires 385/65 R 22.5, 160K, manufacturer according to factory specifications (road profile) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire and spare rim(s) Braking system/suspension: Braking system according to EC directives 71/320 or ECE R13 Two-line pneumatic braking system Braking system manufacturer Knorr EBS system 2S2M, 2nd axle sensed RSS - stability program Spring accumulator parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additionally lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems: Axle load indicator via EBS-CAN bus signal for display via display in the driver's cab Tipper body: Steel welded structure Fixed steel sheet front wall 4 mm, approx. 980 mm high 2 step-up brackets inside and 1 outside on the front wall Fine-grain special steel floor sheet 5 mm (Slight floor waviness due to welding distortion possible) 5 pairs of pivoting lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended pivoting lock and spring-assisted lifting, and additionally pivotable Kedpfok Ttc Sjx Ah Esdt Side walls left and right with manual central locking 2 rear corner pillars at the height of the side walls, fixed on the side Steel sheet rear wall 4 mm (HB400), approx. 980 mm high, pivotable with recessed bearing, hooks for dosing chains (on the rear wall and underside of the body) Rear wall locking = automatic pneumatic closure 2 dosing chains for the pivotable rear wall With sealing strips Hydraulics: 1-line system with hydraulic connection hose including plug-in coupling SVK DN13 Tipper press for 3-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarpaulin: Plastic roll tarpaulin incl. aluminum tube and hand crank, side wall overhang approx. 400 mm, without customs closure, in the direction of travel on the right horizontal Tarpaulin bow rope lashing, zigzag lashing at the front and rear; Stop bracket and locking for rolled-up roll tarpaulin in the direction of travel on the right; Holder for hand crank Tarpaulin fastening in the direction of travel on the left with 2 lashing straps with Rubber pads and tensioning locks on the body

Condition: new, Year of construction: 2025, operating hours: 1 h, Hackschnitzel oder Holzspänen produzieren mit PYTHON-G. Der Nachzerkleinerer Python-G wird in Kombination mit dem PYTHON betrieben. 2-Stufen Zerkleinerung. Die Endfraktion des Vorbrechers PYTHON wird direkt in den Materialeinlauf der Nachzerkleinerer PYTHON-G geführt. Die Maschinen werden dann in L-Form angeordnet • Antrieb mit Motorreduktor 15 kW, 400V, 3phs, 50Hz • Rotor Durchmesser ca 350mm x 1200mm • Rotormesser 40x40mm concave • Anzahl Messer ca 25 ( optional 50 Stk.) • Haubtabmessungen L 2100 x B 850 x H 1000mm • Sieb B 450mm x L 1200mm ( Fläche 0,85m2 ) • Siebloch Grösze nach Wahl ( 25mm/30mm/40mm/50mm ) • Gewicht ca. 1350 kg Kdjdpfjibnd Ejx Ah Est • "Made in Holland"

Condition: like new (used), Tower clamping system TS 125 Magnum Jaw width 125 mm Clamping ranges: 1 x 476 mm 2 x 226 mm 4 x 108 mm Overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7,850.00 € + VAT Item 2 4 hydraulic clamping cylinders Kdsdpfx Ahoidl Rrs Eet Jaw width 125 mm Overall length 400 mm Price per unit 850.00 € + VAT Price for 4 units 3,000.00 EUR + VAT Item 6 Preci Tool NC, Type 125 Jaw width 125 mm Overall length 430 Only 1 fixed jaw Price: upon request Item 8 HILMA machine vise with rotary table Mechanical/hydraulic Clamping force 40 daN Jaw width 125 mm Overall length 430 mm Price: 850.00 € + VAT Item 9 HILMA machine vise Mechanical/hydraulic Clamping force 50 daN Jaw width 160 mm Overall length 550 mm Price: 900.00 € + VAT Item 10 HILMA machine vise Mechanical/hydraulic Clamping force 25 daN Jaw width 100 mm Overall length 380 mm Price: 650.00 € + VAT Item 11 HILMA machine vise with rotary table Mechanical/hydraulic Clamping force 40 daN Jaw width 125 mm Overall length 430 mm Price: 850.00 € + VAT Item 12 HILMA machine vise with rotary table Mechanical/hydraulic Clamping force 50 daN Jaw width 160 mm Overall length 620 mm Price: 1,050.00 € + VAT Item 26 HILMA machine vise (trade fair model) Jaw width 125 mm Overall length 430 mm Price: upon request Item 28 HILMA machine vise Mechanical/hydraulic Clamping force 25 daN Jaw width 100 mm Overall length 570 mm Price: 700.00 € + VAT Item 32 Clamping angle Clamping surface 160 x 420 mm Price: 150.00 € + VAT Item 33 Clamping angle with HILMA clamping cylinder Jaw width 125 and load cell Price: 450.00 € + VAT

Condition: used, milling machine vice, hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power vice, NC power clamping vice -Manufacturer: Röhm, hydraulic vice with rotary table -Type: RB 135 Ksdpfx Ahsu Rv R So Ejdt -Clamping jaws: 135 x 40 mm -Clamping depth: 150 mm -Dimensions: 470/260/H150 mm -Weight: 47 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 167 mm -Dimensions: see photo technical drawing -Dimensions: 190/60/H135 mm -Weight: 3.4 kg Kdjdpou Rv Spsfx Ah Eot

Condition: used, lunette, steady rest, lynette Kodpfx Aou Rv S Aeh Ejdt -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Dimensions: 190/67/H45 mm -Weight: 2.0 kg

Condition: used, lunette, steady rest, lynette Ksdpou I Hqqofx Ah Eodt -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 166/57/H115 mm -Weight: 1.7 kg/pc.

Condition: used, Year of construction: 1986, length in total / mm band width / mm conveying height / total power requirement / kW weight of the machine ca. / t Kodpfx Aeuddb Aoh Ejdt required space / m Conveying height: 2610mm belt width: 240mm Conveying length: 6900mm

Condition: good (used), lunette, steady rest, lynette Kjdpouza S Ujfx Ah Esdt -Clamping tool: clamping bracket -Clamping width: 179 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 205/80/H155 mm -Weight: 5.0 kg

Year of construction: 2024, condition: new, NEW , NEVER USED Demag Panel NC3 MAde in Germany width-30CM height-5CM Kdodjuz Uq Eopfx Ah Eot length-50CM TYPE: 6EJ5 398-0DE14

Year of construction: 1992, condition: good (used), Max. Ladegewicht: ca. 5 t Breite: ca. 4000 mm, Höhe: ca. 3800 mm, Tiefe: ca. 600 mm, Transport Maße: Kdedpfx Ahju Ava Do Est Breite: ca. 2000 mm, Länge: ca. 3800 mm, Höhe: ca. 1200 mm, Gewicht Netto: 450 kg.

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm Kdodpfx Ahjddfh Eo Eot -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, 7 Collet sizes: Kdjdpfx Aebn Rpieh Ejt 7-9-10-12-16-18-20 mm

Condition: good (used), Machine vice, sturdy vice, drill press vice Kdsdpfx Ahjb A Nris Ejt -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm Kedpfsb A Nrpsx Ah Esdt -Dimensions: 680/330/H180 mm -Weight: 95 kg

Condition: used, Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 140 mm -Clamping depth: max. 210 mm -Dimensions: 70/290/H150 mm -Weight: 32 kg Kdodpfeb A Nrxsx Ah Est

Condition: good (used), Machine vice, sturdy vice, drill press vice Kdjdpfx Ajb A Ntbjh Ejt -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 240 mm -Dimensions: 650/350/H130 mm -Weight: 40 kg Kedpfxob A Nuns Ah Eedt

Condition: good (used), Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 460/310/H160 mm Kdjdob A Nvzspfx Ah Ejt -Weight: 50 kg