Used Forklift In India for sale (23,242)

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 5,000 h, Continous Cast link belt Hardening & tempring furnace with online pre wash & post wash SCADA control fully automatic Guslhezbiqgjcdwyjc

Condition: new, functionality: fully functional, machine/vehicle number: 25D3501412, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 2,400 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Hyundai, fork length: 1,200 mm, tire condition: 100 %, overall weight: 5,825 kg, Equipment: UVV, all wheel drive, sideshift, The UN 4WD Rough Terrain Forklift 3.5T is specifically designed for tough operating conditions. Equipped with a powerful Hyundai diesel engine, all-wheel drive, differential lock, and heavy-duty off-road tires, it delivers maximum traction and reliability. Detailed technical specifications can be found in the last image. Gelhcdwjxzpv Ijysuc

Condition: excellent (used), Year of construction: 2012, operating hours: 2,091 h, lifting height: 5,550 mm, free lift: 10 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), gearing type: automatic, fork length: 1,200 mm, total height: 2,850 mm, total length: 3,700 mm, total width: 2,100 mm, color: blue, Very nice 2012 MANITOU M50-4 T 3-E3 4x4 rough terrain forklift (4x4) with triplex mast, side shift, 4-cylinder Perkins diesel engine, mast height: 5,500 mm, only 2,092 operating hours (last serviced at 2,047 hours) + complete set of off-road tires. = Further Information = Guslhcdsy Apafswyec General Information Year of manufacture: June 2012 Model year: 2011 Registration number: TNG-03-R Driveline Drive: Wheel Weights Unladen weight: 8,040 kg Operational Mast height: 5.5 m Lifting capacity: 5,000 kg Overall height: 285 cm CE marking: yes Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: new, machine/vehicle number: A4E9A01932W, load capacity: 2,500 kg, lifting height: 4,350 mm, load center: 500 mm, mast type: triplex, motor manufacturer: Kubota, fork length: 1,220 mm, Equipment: CE marking, all wheel drive, sideshift, TECHNICAL SPECIFICATIONS - 2.5 tonnes - Fuel: Diesel - Model: 4x4 - Engine: Kubota V2403 StageV - Fork length: 1220 mm - Mast: Triplex 4.35m Gujlhomxkdhscdwyjc AVAILABLE OPTIONS - Side Shift - OPS System - Suspended seat

Condition: new, load capacity: 3,500 kg, lifting height: 4,350 mm, load center: 500 mm, mast type: triplex, motor manufacturer: Kubota, fork length: 1,220 mm, empty load weight: 5,545 kg, Equipment: CE marking, all wheel drive, sideshift, TECHNICAL SPECIFICATIONS - Lift capacity: 3.5 tonne - Fuel: Diesel - Model: AWD (4x4) - Engine: Kubota V2403 StageV - Fork length: 1220 mm Guolhcdwemxkm Ueyec - Mast: Triplex 4.35m AVAILABLE OPTIONS - Side Shift - OPS System - Suspended seat

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Gujlszdazbohcdwyoc Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Guolhex U Eyfocdwyoc

Condition: like new (used), functionality: fully functional, OPPOLD WEFIX IV 68 – Cutter head set for window and door milling Gujlszda Egehcdwyec In very good condition, like new, the cutter head set has been used very little. Consists of 16 double-rebate profile and groove milling heads. Includes detailed drawings, which can be sent to you by email upon request. All milling heads are suitable for a 50 mm spindle or collet. The carbide indexable inserts for the window milling set can still be obtained from OPPOLD for many years. A large proportion of the indexable inserts are of standard design, which makes the milling set very economical. The standard indexable inserts are very inexpensive and can be used on multiple sides. Clamping height: 80 and 95 mm. The carbide indexable inserts have a very long service life. For weather protection strips of type BUG R12.25S and GUTMANN Werra 12.25, for threshold profiles of type BUG BSL12.25S and GUTMANN Lech 12.25. With a distinct visible joint of R 3 mm. The milling set is complete. All indexable inserts are in good condition and sharp. You can start working immediately with all the milling heads. With this milling set, you can manufacture windows and doors IV68 with a double rebate, Euro groove and Euro rebate, and a 12 mm rebate clearance. The new price for all milling heads was approximately 35,000.00 DM. For a material thickness of 68 mm. Seals, rain strips and milling accessories can still be obtained for this milling set for many years. We will personally deliver the milling set throughout Germany for 220.00 euros, so you have no risk when purchasing. The milling set consists of: 10 double-rebate profile milling heads: K3 4660 L4 - Frame, bottom, outside K3 4660 L7 - Frame, side and top K3 4660 L6 - Sash, inside, without strip 3 140 10 54 - Sash, upright and bottom 3 140 20 70 - Counter milling cutter 3 140 00 00 - Sash, inside, with strip 3 140 10 50 - Sash, outside, side and top 3 140 10 52 - Sash, outside, side and top, counter-rotating 3 140 10 58 - Sash, center rebate Without designation - Sash, inside, bottom and 6 groove milling heads: K2 3663 Z3 - Frame groove K2 3663 Z2 - Sash tenon K2 3663 Z4 - Frame tenon, top, transverse K2 3661 Z1 - Sash groove K2 3661 Z5 - Frame tenon, bottom K2 3661 Z6 - Purchased later, without drawing.

Condition: used, Year of construction: 2023, HXCP HX360 Hardcover Casing-In Machine (2023 Model) Note this machine new is over $70,000 USD. Asking for $39,000 or best offer for quick sale. Buyer responsible of removal and shipping. Link to YouTube video is included in the listing. Available for sale is a 2023 HXCP HX360 automatic hardcover notebook/book casing-in machine. The machine was purchased new in 2023 and has been used in our hardcover book production operation. It is designed for automatic casing-in of hardcover books, journals, notebooks, and similar products. We are selling this machine because our production requirements have grown and we are upgrading to a larger, higher-capacity binding line that better fits our current workflow. The machine is currently located in New Jersey * HXCP HX360 * Year: 2023 * Automatic hardcover casing-in machine * Suitable for hardcover books, notebooks, and Guelhozbykqecdwysc The machine is being sold as-is, where-is, with Please contact us for additional photos, videos, specifications, and pricing.

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France Gujlexizcvehcdwyjc • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: excellent (used), • Original ZÜRN milling toolholder, Germany • Type: SK40 – TC40x06x100-AD (DIN 69871) • High manufacturing precision, balanced for CNC operation • Tool shank Ø6 mm, length 100 mm • Robust design – Made in Germany • Very good condition, ready for use Gjlhcdwexcx Suoyjuc

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments. Guslhcdow Sav Ijwyoc

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel Gjley Tmrmjhcdwysuc - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Year of construction: 2022, condition: used, GS international 12t Bj 2022 Gelhey Tltcecdwyouc Width 2.25cm Hydraulically adjustable We can also arrange your transport

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Gjlhcjlnk Tyodwyjuc Number of strokes per minute: 100 Total weight: 64 ton Anvil weight: 47 ton

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Total weight: 35 ton Gelhcdwetgpdzsyouc Anvil weight: 24 ton

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT Gslhotvau Hecdwyeuc RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T • Lifting capacity: 250 kg (0.25 t) • Year of manufacture: 1991 • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Gujlhcdwsxtfnweyoc Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.

Condition: used, Year of construction: 2005, TAKISAWA TC 350M CNC TURNING CENTRE Guslhcdwoy Eyb Ejyjc MAKE TAKISAWA, MADE IN JAPAN MODEL TC – 350M L5 CONTROL FANUC 21-iTB YEAR 2005 TURRET 12 STATION MAXIMUM SWING 700.0 mm MAX TURNING DIAMETER 460.0 mm MAX TURNING LENGTH 510.0 mm TRAVEL X-AXIS 440.0 mm Z-AXIS 550.0 mm SPINDLE SPEED RANGE 2,500 RPM BAR CAPACITY 80.0 mm TBC PLUS C – AXIS MILLING TAILSTOCK TOOL SETTING PROBE SWARF CONVEYOR 10” 3 JAW CHUCK TURRET TOOLING

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Gslhsm Nntyscdwysuc Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system Gslhcoyv E Aijdwysuc 4. Gluing system 5. Auxiliary components, technical documentation, certificates Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Golhcdwowrkctjyeuc Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel Gelhcdsyr Awbjwyeuc The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), Year of construction: 2022, Detailed specs in the pictures and below. Description: Gjlhcdwsnlag Ijysuc 1.Equipped with full color touch screen monitor, main machine, transfer and conveyor can control the speed automatically and synchronization trace parameter setting system. 2. The machine adopt movable and adjustable operating function in each section .Equipped with elaborate tooth lever design. It is simple, convenient and efficient for one man operation. 3. High power stepless speed control frequency conversion and high-efficiency power motor, the highest speed can reach 400 meters/min, power transmission adopts powerful belt transmission, with low noise, high efficiency, easy maintenance and economic efficiency. 4. Each functional components of the machine adopt modular design, which is convenient to assemble, convenient to replace and debug products, convenient for beginners to master technology, and easy to learn. 5. Unique design of the upper and lower glue tank and coordinate with the need of products. 6. Compression and conveyor section equipped with adjustable the pressure design according to the needs of the products. Equipped with a set of special soft belts to ensure uniform pressure and perfect quality. 7. The machine adopt photoelectric counting, which can be used for total or quantitative counting, and equipped with kicker mark recognition device.

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Gslhcswzzzfedwyouc Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg