Used Fleischer Desk for sale (287)

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks Ksdpfx Ajxlb E Aeffenf - External suction cyclone - various

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Knodpfx Afoxhg Ibofef Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 034-029458, total width: 3,300 mm, total length: 6,000 mm, total height: 1,470 mm, overall weight: 5,790 kg, input current: 12 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,000 mm, feed length Y-axis: 3,300 mm, pressure: 8 bar, machine base height: 870 mm, cutting length (max.): 6,000 mm, Automatic line for precise and fast cutting of float and laminated glass, suitable for medium and large glass processing plants. - Integrated control, automatic positioning and glass separation - Precise and reliable cutting thanks to robust mechanics and pressure control - Updated control system with modern touchscreen console - A set of spare parts included in the price General information: Model/Type: GFB-60/30RE-S Year of production: 2006.g. Colour: Lisec blue (001) Operating/maintenance language: English/German/Croatian Dimensions & Weight: Height: 1470 mm Net weight: 5790 kg Gross weight: 6040 kg Maximum load: 1016 kg Maximum load capacity per m2: 51 kg/m2 Electrical Data: Operating voltage: 3/N/PE - 50Hz, 400V Connected electrical load: 7,91 kVA/12,04 kW Full load current: 11,42 A Max. current largest consumer: 7,40 A Simultaneity factor: 0,4382 Max. power consuption: 4,10 kW Pneumatics: Connection rating: 8 bar Compressed air consuption: 140 l/min Glass processing range: Glass thickness: 2,3 - 19 mm Min. processing length: 1600 mm Min. processing width: 1600 mm Max. processing length: 6000 mm Max. processing width: 3300 mm Performance data: Kjdpfxoxhdgbj Affenf Transport height (horizontal): 870 mm Transport speed: 40 m/min (optionally 20 stable) Cutting speed: 100 m/min Cutting pressure control: Manual Glass positioning stops: Bearings single-sided Automatic reverse travel: Not included Special shapes: Shapes acc. Catalog with rches Blower for air cushion transprot: With additional air cushion Type of cutting oil: ACPE 5250 + ACPE 5503 + ACPE 6000 Subsequent machine: VB laminated glass cutting system Machine execution: Without automatic finishing brush Meter-field section: Without one-meter section Condition: The machine is well-preserved and fully functional. Documentation and additional information available upon request.

Condition: excellent (used), Band width: max. 400 mm Band thickness: 0.5 - 4.0 mm Cross-section: 1,000 mm² Upper roller pneumatically liftable Large roller basket at infeed Side band guide with right/left spindle With mounting plate for installation on the press body Kjdsxg Rlzjpfx Affsnf The feeder receives a completely new press control as a desktop unit upon order

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216, total width: 4,000 mm, total length: 4,500 mm, total height: 1,150 mm, overall weight: 2,600 kg, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, VSG cutting table M 37 incl. support Cuts from 6-16 mm Kedpjxg Ii Rsfx Affonf Pneumatics new, heating lamp new, felt new, machine comes with a service contract! If interested, we can also provide additional pictures and videos.

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. Kjdpfx Asuf Sy Aoffjnf 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor Knsdpfx Afow Uptzefof • Integrated cutting plan display • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side turning device • Price on request

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, fuel tank capacity: 290 l, color: white, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, = Additional Options and Equipment = - Leaf suspension - Fog lights - Radio/CD player - Sideskirts = Notes = The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is a powerful, robust, and versatile tipper truck, specifically designed for heavy-duty operations in construction and mining sectors. With its high-performance engine, high payload capacity, and the reliable Meiller tipper body, this vehicle is ideal for transporting large quantities of soil, sand, stones, or other bulk materials. Technical specifications Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper: - Drive: 8x4 configuration for optimal stability and traction. - Gross vehicle weight (GVW): 41 tons, suitable for extremely heavy loads. - Axle configuration: Double driven rear axles. - Suspension: Reinforced suspension for intensive use. - Wheelbase: Optimized for maneuverability and stability under heavy workloads. - Engine: 12.8-liter inline-six Euro 3 diesel engine, 394 hp (294 kW), 1,900 Nm torque. - Transmission: PowerShift3 automatic gearbox with off-road mode for maximum control. - Axle loads: 2x front axle 7.5T, 2x rear axle 13.4T. - Clutch: Twin-plate clutch. - Tyres: 315/80 R 22.5. Meiller Tipper Body: - Classic rear tipper H436, 20 cbm, HARDOX floor. - Type: Rear tipper, ideal for bulk material transport. - Capacity: 20 m³ loading volume. - Material: Wear-resistant steel for greater durability. - Hydraulics: Meiller high-performance hydraulic system for efficient unloading. - Safety: Automatic locking system and stabilizer for safe operation even on uneven terrain. Advantages: - Effortless transport of large volumes of material with a GVW of 41 tons. - Engine designed for efficiency even under heavy loads. - Robust construction and high ground clearance for off-road use. - Simple and intuitive tipper operation from the cab. Fields of Application: The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is ideal for: - Construction projects: Transport of earth, sand, gravel, or construction debris. - Mining: Transport of heavy rocks and ores. - Infrastructure works: Delivery of materials such as asphalt and building materials. DIMENSIONS: L. 8,282mm | W. 2,500mm | H. 3,700mm (WEIGHT 16,000kg) Meiller Tradition: Meiller tippers have been produced in Germany for over 170 years and are renowned for their reliability and innovative strength in the construction industry. Strong in Extreme Conditions: The Arocs 4140K has been tested under the harshest construction and mining conditions — from deserts to quarries — always delivering outstanding performance. Ksdpfxswqquyo Affenf = Further Information = General Information Year of manufacture: 2025 Cab: Day cab Technical Information Engine displacement: 12,800 cc Transmission Gears: 12-speed Axle Configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Suspension: Leaf suspension Front axle 1: Steered Front axle 2: Steered Dimensions and Weights GVW: 41,000 kg Wheelbase: 455 cm Functionality Cargo capacity: 20,000 l Body manufacturer: Meiller Tipper: Rear

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Kedpfx Afjwvih Njfjnf Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Ksdpfx Afspvlf Sofsnf Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Knedpfxevqbhlo Affjf Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: new, Year of construction: 2025, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system Kedoiz S I Hjpfx Affonf bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Knedsxdkxiepfx Affsf Frequency: 50 Hz Note: The machine will be available from 02/12/2025!

Condition: good (used), Year of construction: 2007, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, Glass cutting line for split strips - consisting of: Glass Hegla Cutting Table OPTIMAX3323F 6372 2007 00305 Glass Hegla Glass loading Table BBS 3323 7176 2007 00306 Knedpfxeu S R Ils Affof Glass Hegla Breakout Table LKB 4230 15811 2007 00307 3 racks included , fencing included

Condition: good (used), Year of construction: 2009, functionality: fully functional, - Patented LIST Lina Scan technology for substrate alignment and inspection - Simplest program creation by full-surface substrate scanning - Processing of large substrates – 550 x 500 mm - Detection of synthetic fiducial marks or any geometries - Diffuse and direct camera illumination for optimal substrate recognition and alignment - Two independent, pendulum-mounted print heads - Programmable print head with closed-loop control - Pneumatic squeegee clamping prevents loosening during production - Substrate fixation via Ovar-Top and Y-clamping, secure clamping even for interwoven substrates - Motorized transport width adjustment, programmable via software - Transport direction freely selectable - Flexible stencil holder for various sizes, no adapter needed; substrate support via magnetic pins and blocks - Desktop PC with Windows operating system, 17" TFT monitor. Machine programs and SPC data can be managed over the network - SPC data is graphically displayed to the operator and stored on the hard drive - AOI Automated Optical Inspection - Integrated print post-inspection with LIST - Very simple programming of the inspection area via substrate overview image on the monitor - Definition of areas with different sensitivity settings - Post-inspection of PCBs for pad print and bridging between pads - Stencil inspection for blockage of openings - Error display on the monitor for easy operator verification - Automatic cleaning cycle after detected stencil blockage - Inspection speed: 9100 mm (width: 260 mm x 35 mm/s) - SPC data acquisition - 2D inspection - Print format: min.: 80 x 50 mm, max.: 460 x 460 mm - Parallel process max.: 350 x 460 mm - Stencil size: min.: 450 x 450 mm, max.: 737 x 737 mm - PCB thickness: 0.5 – 6 mm - Squeegee pressure: 260 N - Cycle time: 11 s + print - Setup time < 3 min - Product changeover < 2 min - Transport height: 810 – 965 mm Knsdpfx Aowtqdgsffof - Air supply: 5 – 6 bar - Temperature and humidity sensor - SMEMA inline interface - ESD kit

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 250 kg, total height: 2,650 mm, type of input current: AC, overall weight: 1,000 kg, input voltage: 230 V, ambient temperature (max.): 26 °C, ambient temperature (min.): 18 °C, temperature: 20 °C, CNC 3D measuring machine with new server PC and PC-DMIS CAD 2025.1 Renishaw PH10MQ rotary-swivel head with 7.5° and scanning probe SP25M-2 Kjdpfxjw Rv A Io Affjnf 6-position probe change rack, desk, and accessories

Condition: excellent (used), A lot of used Unify OpenScape Desk Phones, which were in operation for approximately 3 years, is for sale. All devices are fully functional. The offer includes: - 11 x OpenScape Desk Phone CP600 - 2 x OpenScape Key Module 600 - 1 x OpenScape Desk Phone CP710 Terms: - Individual sale possible from €95 per device - Sale exclusively to commercial customers Knedpfx Afexay Apofef

Condition: new, Year of construction: 2025, Small and compact desktop counting machine for counting tablets/pills with regular or irregular shape, capsules and solid granules in the sense of tablets similar products such as candies. Also suitable for gel and gelatin capsules: After receiving samples, we can check and, if necessary, confirm the ability to run. Filling into bottles, cans, jars. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 4 tracks vibration feeding device ensures evenly feeding and no breakage of product. The structure and design of the hopper prevents jamming of the products. Control via touch screen interface, menu in English available. - Specifications: Number of vibrating tracks: 4; capacity: max. 30 fillings/minute, depending on product, shape and quantity of the product; working range: adjustable from 2-9999 per container; error rate: = 0.2%; tablets/pills: min. Ø 5.5mm, max. Ø 35mm; capsules: 00-05#; compressed air: 6bar; power: 220V, 0.6kW; all the parts in contact with the product are made of Stainless Steel 316, other made of Stainless Steel 304; machine dimensions LxWxH: 610x1280x780mm; weight: 115kg. Knedpfx Asv Nk H Ueffsf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2002, System with automatic feeding. 2 compact storage units, gantry crane, tilting table, cutting table for shapes/models and edge layering, Re-Master, automatic breaking system for x-y breaking. Total length: 45,500 mm Knedpexapltofx Affof Total width: 15,000 mm

Condition: used, mileage: 838,600 km, power: 206 kW (280.08 HP), first registration: 07/2014, fuel type: diesel, empty load weight: 12,670 kg, maximum load weight: 6,480 kg, overall weight: 19,150 kg, axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space volume: 45 m³, loading space length: 7,640 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, Equipment: ABS, cooling unit, cruise control, differential lock, onboard computer, tail-lift, Scania P 280 with Thermo King cooling system - Freezer box butcher - Dimensions (LxWxH inside): 7.64x2.46x2.40 m - Cooling unit: Thermo King TK 1000R - FRC:06.2026 - Current - Temperature recorder - Portal doors - Automatic gearbox - Cruise control - Payload: 6,480 kg - Tires: 315/80/22.5 Very good condition! Net export price! Scania P 280 with Thermo King refrigeration - Freezer box butcher - Dimensions (LxWxH inside): 7.64x2.46x2.40 m - Cooling unit: Thermo King TK 1000R - FRC:06.2026 - Current - Temperature recorder - Portal doors - Automatic gearbox - Cruise control - Payload: 6,480 kg - Tyres: 315/80/22.5 Very good condition! Net export price! Scania P 280 avec réfrigération Thermo King - Fourgon de congélation Fleischer - Dimensions (LxlxH intérieur) : 7,64x2,46x2,40 m - Groupe frigorifique : Thermo King TK 1000R - FRC:06.2026 - Courant - Enregistreur de température - Portes à portique - Automatic transmission - Régulateur de vitesse - Charge utile : 6.480 kg - Tires : 315/80/22,5 Très bon état ! Prix net à l'exportation ! Yourtrucks Group The Yourtrucks Group maintains business relations around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use. Knedovih Uvopfx Affjf Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and is no substitute for detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typing errors and prior sale. Our general terms and conditions apply exclusively. Languages - We speak english - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: new, Year of construction: 2025, Small compact desktop counting machine, stainless steel (SS304) version. Counting 1-100 pcs into bottles, cans, etc. Operation through elektromagnetic vibration: tablets are falling into the counting plate which then turns and release the required number of tablets to the outfeed into the bottle or other container. By changing the counting plates the size and number of tablets can be changed. Low noise and easy operation. - Specification: Speed: max. 20 fillings/min; 220V, 180W; machine dimensions: L600xW500xH700mm; weight: 50kg. Kodpfev Nk Iljx Affonf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Stand-alone linear weigher for filling weight of 200-5000g to be installed at conveyor belts or working desks. Stainless steel version with servo motor. - Specifications: accurracy: < +/- 2g (depending on product and total weight); max. speed of the machine in neutral: 15 cycles/minute; power: 380V, 0.7kW; machine dimensions: L875xW860xH2010mm; weight: 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Knodpfjv Nk Dmox Affof

Condition: new, Year of construction: 2025, 1-head linear scale as desktop version. Suitable for weighing fine granulates such as sugar, salt, glutamate, as well as coarser ones such as seeds, tea, cereals, nuts, glutamate, rice etc. - Specifications: capacity weighing hopper: 0.5 L; weighing range: 1-150g; HBM load cell; accuracy: 0.2-1g; max. speed of the machine in neutral: max. 15 cycles/minute; power: 220V; product contact parts from AISI 304; machine dimensions: L600xW500xH750mm; weight: 80kg. Knodpjv Nk Dtofx Affsf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, 1-head linear scale as desktop version. Suitable for weighing fine granulates such as sugar, salt, glutamate, as well as coarser ones such as seeds, tea, cereals, nuts, glutamate, rice etc. - Specifications: capacity: weighing hopper: 3 L, storage hopper: 50L weighing range: 20-2000g (accuracy: 0.2-2g); HBM load cell; max. speed of the machine in neutral: max. 15 cycles/minute; power: 220V; product contact parts from AISI 304; machine dimensions: L750xW550xH750mm; weight: 85kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kedjv Nk Dyopfx Affonf

Condition: new, Year of construction: 2025, Stand-alone Auger Filler Desktop Version with PLC controlled with Touch ck and easy programing with check weighing by customers separate weigher. - Specification: hopper volume: 8 liter; filling weight: 2-100g; Stainless steel version with servo motor; packing accuracy: 0,3-1% (depending on product and total weight). Packaging speed 30 cycles/minute; power: 220V, 0.4kW; machine dimensions: L720xW555xH990mm; weight: 80kg. Knedpov Nk D Hsfx Affjf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.