Used Flail-Mowers for sale (158)

Condition: as good as new (ex-display), Year of construction: 2017, Energreen forestry flail had 1.50m working width for Robomax Kfjdpfx Afeigzdpjfea demo unit as good as new

Condition: good (used), Tires with rims, tires for lawn tractors, ride-on mowers -Tire size: 23x9.00-15 AS -Dimensions: Ø 720 mm -Weight: 22 kg Ksdpfx Aecgtyhjffefa

Condition: used, Year of construction: 2025, working width: 9,100 mm, Mower Bar: Disc | Claas Disco 9300 Direct Swather Demo unit in use Year of manufacture: 2025 Large-area mower for rear tractor mounting, Cat. III - Working width: 9.10 m (8.90 m) - Main frame with optimized center of gravity due to rearward-angled outriggers - Low-speed concept with reduced speed to 850 rpm DIRECT SWATHER: - Central or unilateral swath merging via augers - Conical auger design for consistent crop flow - Swiveling augers for wide crop distribution - Auger discharge chute equipped with knife and counterknife Features: Wear skids Three-point hitch Drive shaft 1 3/8", 6-spline ISOBUS cable Kedjwu Irkopfx Affsfa Outer protective curtains, hydraulically foldable Individual section lift (2-hose) Optionally available (not included in price): CLAAS Disco 3200 F Profil Front-mounted disc mower without conditioner 3.00 m working width with wear skids incl. ACTIVE FLOAT hydro-pneumatic suspension incl. drive shaft | Internal no.: 11264119

Condition: excellent (used), Year of construction: 2024, 158 USED BCS 740 single-axle tractor. Manufactured in 2024 - machine under warranty. Warranty: 2 years. EQUIPMENT: - flail mower - operator's trolley Kfodpfx Aexgqrbjffoa - engine housing - hour meter - quick coupler - aluminum ramps

Condition: excellent (used), Year of construction: 2015, operating hours: 167 h, For sale at a bargain price, a wireless lawnmower controlled by a remote control, is ideal for difficult conditions such as steep roads or dangerous places. (see Video) It has 4-wheel drive and a long range remote control. It will mow up to 1500m per hour. - A bargain price because of the winter season, it will be 20% more expensive in the spring! So it is recommended to buy this equipment now! Of course, fully functional and ready for further work. - Straight from a bankrupt company from Sweden. Kodpfx Aovv Hi Eoffsfa The new one cost them over 25 4-wheel drive, remote control - everything is 100% functional. The lawnmower was purchased in December 2014 and only used in the spring of 2015! Key data: Performance / Consumption Engine Briggs & Stratton 950 Displacement 223 cm3 Fuel tank capacity 4 l / 1 gallon Fuel unleaded petrol Hydrostatic transmission Speed 0 - 4 km/h / mph Wheel steering Blade 1 rotary Cutting width 56 cm / 22 in Cutting height 4 - 9 cm / 2 - 4 in Manual clutch Option Mulching kit 2 Capacity up to 1500 m/h Fuel consumption 1 l/h Gradeability 30 degrees / 58% Dimensions 1040 x 900 x 600 mm Weight 125 kg Transportability in Poland and the European Union!

Condition: used, mileage: 1,200 km, power: 200 kW (271.92 HP), first registration: 09/2025, fuel type: diesel, Year of construction: 2025, Equipment list: * Axle ratio i = 6.377 * Differential lock on front axle * Trailer brake, dual-line * Rear mounting brackets * Comfort steering (electrohydraulic power steering) * Front mounting plate EN15432-1, Type F1/C * Wheelbase 3,150 mm * VarioPilot (dual steering, left/right interchangeable) * Side underrun protection * Air-suspended comfort seat with seat heating, passenger side * Air-suspended comfort seat with seat heating, driver side * Additional left stalk switch * Right armrest with control lever mounting, driver’s seat * Plug-in control lever on driver’s seat armrest * Universal bracket for external control unit * Side-sliding center console, additional storage compartment * Air conditioning system * Activated carbon filter * Constant current sockets 12V (C3), 12V and 24V center console * On-board 24V/25A socket in cab, with C3 signal * Front camera * Rear view camera at end of towing vehicle * Monitor for camera system * Universal electrical interface per EN16330 * Battery master switch on battery box * ABS trailer socket 24V, 7-pin / 5-pin * Trailer socket 12V, 13-pin * Front socket 24V, 7-pin * Reversing warning system * Cab strength compliant with ECE-R-29/03 * Mowing door on right and cab prep for mower seat * External sun visor, transparent * Clear, heated windscreen * Transmission oil cooling, oil/air * EasyDrive (hydrostatic drive) (SN) * Automatic Shift (EAS) * Hydraulics for tipper body * age, 2-circuit, 3-cell, full prop, snowplow relief * Tipping cylinder * Rear hydraulic coupling, 4-way, cell 1+2 * Pressure line at rear, 2nd hydraulic circuit * Separate return line at rear Kedpfx Aewtgyqjffofa * Hydraulic quick couplings ISO 7241-1 A / ISO 5675 * Implement carrier series * Compaction stage (4-5) 11 UG1 300/400 medium * Compaction stage (6) 0 * Compaction stage (7-8) 12 chassis LL * UNI-TOUCH operating system with 10.5" touchscreen * Combination instrument, 12.7 cm, with video function * Digital tachograph, 2nd generation, version 2, ADR * Tachograph manufacturer: VDO * Seatbelt warning, driver and passenger * Warning light for telescopic cylinder * Digital radio with USB port and Bluetooth * Truck Data Center 8, base * Driver assistance card, Europe region * Pre-installation for Truck Data Center 8, base * AdBlue tank 25 l * Warning beacons, LED, yellow, left and right, with tripods * Additional LED high beam, roof bar mounted * Work lights, upper cab rear panel, LED * Additional, height-adjustable headlights on A-pillar, LED, heated * Engine OM936, inline 6, 7.7 l, 200 kW (272 hp), 1,100 Nm * Engine specification Euro VI, E * High Performance Engine Brake * Clean-Fix rapid radiator cleaning system * Engine PTO including front PTO * Dropside body, internal dimensions 2,385 x 2,075 x 400 * Subframe for dropside body * Increased trailer load, ZAA max. 20t * Heavy-duty tow hitch, large jaw, ring type, 38.5 mm bolt * Flatbed rims 10.00V-20 * Warning stripes red/white, retroreflective * Warning triangle and beacon * Attention Assist * Traffic Sign Assist * Tire pressure monitoring system * Sideguard Assist 2 * Frontguard Assist * Pre-installation for alcohol interlock * First aid kit * Weight variant 14.0 t (7.1/8.0) * Vehicle version according to GSR, phase B * Manufacturer’s warranty: 2 years from initial registration/commissioning * Instruments/labels/manuals in German Other notes: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport * No liability for typographical and printing errors. * S

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance. Kodpfx Afexlf N Sefofa

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth Kfodjw I Ar Ropfx Affsa - Wear plates - Scraper floor bars - Scraper floor chains - Flail tips - Flail holders - And much more.

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Kodpfxoxf U N Uo Affsfa Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar 7 disc modules with 2 blades each incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price. Kodsn E Rm Eopfx Affofa

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: gasoline, operation weight: 350 kg, Year of construction: 2015, operating hours: 427 h, Equipment: all wheel drive, cable winch, Dvorak SPIDER ILD-02 Radio remote controlled Large area mower / embankment mower Technical information according to manufacturer: Spider large area and embankment mower Areas of application The remote-controlled SPIDER ILD was designed for the maintenance of uneven and rough terrain, with inclines of up to 40° degrees (up to 55° degrees with the optional cable winch). The mower not only copes well with rough ground, wild growth and unkempt lawns, but also with well-kept parks. It is invaluable, especially when maintaining ditches around roads, for cutting grass in orchards and forest nurseries, landfills, areas around power stations, airports or mountain hotels, ski slopes and parks and military areas. It can also be used in agriculture and is often used for mowing golf courses and other sports facilities. The unique drive system makes it very suitable for maintaining the surrounding terrain of reservoirs, rivers and dams. The machine's exceptional environmental friendliness is due to its low weight and soil-friendly drive system. The 4-wheel drive allows the mower to be used in wetlands and protected nature reserves. Mowing system Mulching system Control system Radio remote control Cutting width 123 cm Cutting height adjustable from 90 - 140 mm Cutting system 4 cutter bars with 8 blades Area output Ø 3,500 m²/h | max. 7,000 m²/h Engine Kawasaki FS 691V | 2 cylinders Engine output 17.6 kW | 24 hp | 726 cc Transmission Hydrostatic transmission 0 - 8 km/h Hour meter Yes Electromagnetic mower clutch with brake Drive 4-wheel drive Steering 4-wheel steering Wheels endlessly rotatable through 360 Tires 16 x 6.50 | V-profile Tank capacity / consumption 16 liters / 3 - 3.8 l/h Weight 335 kg Dimensions 1640 x 1430 x 920 mm Ksdpfetzczdox Affofa This SPIDER ILD02 with cable winch was first commissioned in 2015, has 427 operating hours according to the meter and is in a well-kept overall condition with the usual signs of use and wear and tear of this equipment class, customer service freshly carried out, ready for immediate use! - Net price 16.722,-€ / Gross price 19.900,-€ - Viewing / test drive possible - Shipping costs nationwide (except islands) 400,-€ - Our leasing partner will be happy to provide you with an attractive leasing / financing offer!

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel Ksdsxcxmlopfx Affefa * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) Kjdpfexlf Hwsx Affsfa - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: ready for operation (used), operating hours: 8,211 h, functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper from First Owner Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out by us free of charge prior to sale. Machine version equipped with the new drive pedal system 4,301 sweeping hours 8,211 total operating hours 60,430 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Reversing camera Swept material container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Permissible total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank capacity: approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min, 225 bar - Circuit 2 (rear): 0–20/25/30 l/min, 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg Additional attachments from HAKO such as broom sweeper, snow plow and lawn mower possible (not included with delivery) Errors, subject to change, and prior sale reserved We sell exclusively under our general terms and conditions and exclude any warranty. Errors, subject to change, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm without interruption, Saturday by appointment; outside these hours, appointments by phone are possible. Kfsdpfx Aewwhytsffsa We are happy to accept your current used equipment/vehicle as trade-in. Sales to commercial customers and exporters are given preference, this applies to our entire vehicle inventory. The above information is non-binding. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 2015, operating hours: 1,464 h, power: 16 kW (21.75 HP), KUBOTA G23-2 HD Ride-On Lawn Mower with High-Dump System, 16.1 kW/22 HP Includes RCK 48 mid-mounted mower, 1.22 m wide, 640 mm grass catcher with hydraulic high-dump system. Engine: 898 cc 3-cylinder KUBOTA diesel engine, Stage V emissions standard, 16.1 kW (21.9 HP) (SAE J1995) * Transmission: HST transmission, load-sensing, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single-pedal steering * PTO drive * Oil-cooled disc brakes * Front turf tires: 16 x 7.5-8, rear turf tires: 24 x 12.00-12 Comfort: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature indicator * Hour meter * Tachometer * Easy Checker * Safety system for mower and ground drive * "Kross-Control" single-lever control unit for all hydraulic functions * Integrated front tie-down eyes Mid-mounted mower: * Rotary mower with 2 blades, drive via PTO shaft, electrically operated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm, rotary knob, 13 settings, blade length 673 mm (1.22 m), ground clearance 150 mm Grass catcher: * Hydraulic emptying, dumping height (HD) 1.97 m, integrated fill level indicator, including front weight holder, additionally equipped with 2 front weights * Working width: 122 m Kfsdpfx Aowcagceffsa ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: new, empty load weight: 115 kg, maximum load weight: 635 kg, overall weight: 750 kg, loading space length: 2,006 mm, loading space width: 1,006 mm, loading space height: 1,100 mm, Year of construction: 2024, Low loader tipper trailer Garden Trailer 150 KIPP with high frame, high tarpaulin and support wheel Low loader Garden Trailer 150 KIPP with high frame and high tarpaulin - you can connect this model to any car with a class B driving license. The low loader has a tiltable drawbar, which makes it easier to load and unload your transported goods, especially bulk goods. The compact size of the loading area of 150x106 cm makes maneuvering with the low-loader attached to the hook child's play. Larger purchases, new furniture or household appliances or consumer electronics will not be a challenge for you if you have a low-loader. We offer delivery directly to the specified address to all German-speaking countries. We enclose all the documents required for registration with the low-loader. Ksdpjuk H Umofx Affefa Low loader with high frame and high tarpaulin When you buy the Garden Trailer 150 KIPP low loader with high frame and high tarpaulin from UNITRAILER, you receive the following: Fully folding drawbar so that it can be placed on the rear dropside in a low garage or under the house. Vehicle with very comfortable loading and unloading of goods, which is possible by tilting the loading area. Documents: adapted to your vehicle. Simple and hassle-free registration procedure thanks to all the necessary documents - invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Further information can be found under this link. Possible additional equipment - support wheel, additional drop sides, anti-theft device. Support from our experts, who will be happy to answer any questions you may have. Why should you choose the low loader with high frame and high tarpaulin? Ordinary low-loaders available in large supermarkets or even cheaper, old-fashioned professional low-loaders are usually not equipped with the tipping option. In this case, the drawbar is permanently attached to the low-loader. Every loading and unloading means that you have to lift the goods, which is often very difficult. The low-loader solves this problem because its loading surface tilts to make the entire operation easier. All you have to do is push the transported goods directly onto the ground. There is no need to lift or strain your hands or back. Low loader with removable rear dropside Low loader with removable rear drop side The low loader is particularly suitable for transporting lawn mowers or various types of trolleys. In this case, the sloping surface becomes an access ramp that is very easy to drive on with such equipment. You don't have to destroy and dirty your vehicle to transport this type of item. We don't leave an unpleasant smell in it that the rest of the travelers complain about. The low loader solves the problem of transporting dirty, sharp and odorous materials that hinder transportation by car.

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: gasoline, fuel: super 95, gearing type: other, Year of construction: 2023, AGRIA 9600 - 112 !!! 2nd Generation New Model !!! Remote-controlled mulch mower with 112 cm rotary mulching deck This AGRIA 9600-112 mower is a 2023 model with only 304 operating hours according to the meter and is in very good overall condition with normal signs of use and wear. Customer service has just been carried out. The current RRP is €44,900. Net price: €26,806 // Gross price: €31,900 - Inspection / test drive welcome! Kfjdjxa Ar Tepfx Affja - Nationwide shipping for €400 via freight forwarding! - Financing / leasing can be individually requested.

Condition: used, mileage: 1 km, power: 100 kW (135.96 HP), first registration: 08/2013, empty load weight: 6,000 kg, maximum load weight: 5,000 kg, overall weight: 2,300 kg, axle configuration: 4x4, brakes: other, color: red, driver cabin: other, gearing type: other, emission class: none, number of seats: 2, Year of construction: 2013, Equipment: all wheel drive, * German equipment * Condition, see photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Here is a video * Mower combination Dücker MK25 consisting of base unit, RSM mower & DUA800 boom * We will be happy to send you a video of the MK25 mower combination * Complete documentation * Mower combination Dücker MK25, year of manufacture 2013 * Mower combination with embankment mower and verge mower mounted on booms. Suitable for municipal carrier vehicles and tractors with municipal plate sizes 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touchscreen display. Usable on both left and right sides. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. Kodpfjw U Afkex Affefa * DUA 800 boom with 3-part arm and telescopic extension. Reach from vehicle center up to 7.80 m. Hydraulic side shift by 1.60 m. Changeover from right- to left-hand operation possible. Swivel angle 270°. Standard boom relief and floating position. Flail mower head VMS 1200 with working width 1.20 m. * RSM boom with computer-assisted controls operated via control panel with automated buttons. Ideal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m to the side and 3.20 m to the front. Can be switched from right- to left-hand operation. Flail mower head TMK 1300 with working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Mounting: Municipal plate size 3 | Municipal plate size 5. Reach: 7.80 m | 3.60 m. Boom swivel angle: 270°. Hydraulic side shift: 1.6 m. PTO shaft speed max. 710 rpm. Vehicle hydraulic requirement: min. 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from one of our partner workshops. Our offering is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and errors.

Condition: new, functionality: fully functional, Year of construction: 2021, working width: 1,200 mm, NIUBO / MAXER KXS-0 120 FORESTRY MOWER ROTOR FOR MOUNTING ON CRANE (>8T) - Belt drive Ksdpsxlfvrofx Affsfa - Forestry rotor with continuous blades - Counter blade - Axial piston motors - HBC system (hydraulic adjustment motor) - Support legs with replaceable wear plates - Chains and rear protective rubber - Front hood with hinges - Protective chains around working parts - Flat mounting plate - Accident protection according to EU standards - Hydraulic hoses 1.50 m long Older stock unit – new

Condition: new, Year of construction: 2024, working width: 3,000 mm, Mower Bar: Disc | Claas Disco 3200 C Contour New machine Year of manufacture: 2024 - Disc mower for 3-point linkage, Category III - Central suspension - Working width: 3.00 m - Main frame with optimized center of gravity due to rearward-angled boom - Folding angle in transport position: 120° - Low-speed concept with reduced PTO speed to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines MAX CUT Cutter Bar: - 7 mowing discs with integrated SAFETY LINK safety module - Portal-style cutter bar with dual-sided suspension - Permanently lubricated cutter bar with precision-ground gears (20 mm) - Bolted and torsion-resistant cutter bar construction - One-piece, wave-shaped tray for tunnel effect - Forward-mounted mowing discs with HD wear protection - MAX CUT components made of hardened forged steel - Knife holders with tungsten carbide coating Kfjdpow Ul Uzefx Affea - Quick-change blades Cutter bar suspension: - ACTIVE FLOAT system, hydropneumatic suspension | Internal no.: 11180933

Condition: used, mileage: 1,700 km, power: 32 kW (43.51 HP), first registration: 07/2018, overall weight: 1,804 kg, fuel type: diesel, color: red, gearing type: mechanical, suspension: other, operating hours: 1,700 h, Equipment: all wheel drive, Year of manufacture: 2018, 32 kW, 2,197 cm³, 1,700 operating hours, diesel, hydrostatic drive, sun canopy, all-wheel drive, working width: 277 cm, maximum transport speed: 22 km/h, mowing speed: 14 km/h, permissible total weight: 1,804 kg. FOR US, CONDITION AND DRIVING FEEL ARE THE MOST IMPORTANT FACTORS; PRICE IS SECONDARY. For further questions, Mr. Faller is available at the provided number. //*TRADE-IN, PART EXCHANGE OR FINANCING OF YOUR VEHICLE POSSIBLE! All information provided without guarantee.* More offers can be found on our homepage. The description and specifications are not binding and do not constitute a guarantee. Only the sales contract signed at the dealership at the time of purchase is binding. Errors and prior sale reserved! Ksdpfxow Tlr De Affsfa

Condition: new, Year of construction: 2021, The McConnel barrier mower is a hydraulic driven mowing machine, with an independent PTO operated system. The equipment can be attached to the tractor simply with a 3-point hitch, both front and rear, or DIN plate, and can work on both right and left side by simply reversing the cutting discs. Kfedpfxjh Hurke Affoa Builted on a sturdy tubular frame with a total weight of 1500 kg, it is equipped with two side arms that open up to overcome road guardrails, steel cables and hedges of a maximum height of 170 cm, and is able to cut simultaneously from both sides and underneath the obstacle with a cutting width of about 150 cm. The great versatility and working speed of the machine partly depend on the possibility of opening the external arm 180°, permitting a fast and easy positioning and, most of all, enabling the machine to continue mowing with the internal disc while the external one, by lifting up, can pass over road or advertising signs that may be present along the way, while automatically interrupting the rotation of the blades. Energreen Raiber

Condition: used, mileage: 3,262 km, power: 12 kW (16.32 HP), first registration: 01/2015, overall weight: 659 kg, fuel type: diesel, color: red, gearing type: mechanical, suspension: other, operating hours: 3,262 h, Reel mower, year of manufacture 2015 (estimated), 12 kW, 719 cm³, 3,262 operating hours, diesel, hydrostatic drive. Working width: 152 cm. Maximum transport speed: 15 km/h, mowing speed: 6 km/h. Permissible total weight: 659 kg. FOR US, CONDITION AND OVERALL IMPRESSION ARE WHAT MATTER, PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the given number. The year of manufacture is an estimate and not confirmed. //TRADE-IN, PART-EXCHANGE OR FINANCING OF YOUR VEHICLE POSSIBLE! All details are subject to change and non-binding. Further offers can be found on our homepage. The description and specified data do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership upon purchase of the vehicle is legally binding. Errors and prior sale excepted! Kfjdpfx Aew Tltboffja

Year of construction: 2022, condition: as good as new (ex-display), Can be attached to wheel loaders and various implement carriers as well as McConnel Robocut or other tracked mowers Standard with hydraulic swivelling device via 2 heavy hydraulic cylinders (constant speed in both directions) Controlled via remote control of the carrier vehicle HEAVY-DUTY piston motor with freewheel and pressure relief valve for safe milling at the load limit Hydraulic motor optimally matched to the milling unit Large swivel range enables wide-ranging work without awkward manoeuvring Flexible working even in areas difficult to access HARDOX milling wheel ergonomically shaped for a large cutting depth Maintenance-friendly design Kodpfxskvnawo Affofa Hydraulic hoses as standard Hydraulic requirements: 1x supply line, 1x pressure-free return line, 1x pressure-free leakage oil line to tank

Condition: used, mileage: 2,204 km, power: 12 kW (16.32 HP), first registration: 07/2015, overall weight: 659 kg, fuel type: diesel, color: red, gearing type: mechanical, suspension: other, operating hours: 2,204 h, Spindle mower, year of manufacture 2015 (estimated), 12 kW, 719 cm³, 2,204 operating hours, diesel, hydrostatic drive. Working width: 152 cm. Maximum speed: Transport 15 km/h, mowing 6 km/h. Permissible total weight: 659 kg. FOR US, CONDITION AND THE OVERALL IMPRESSION ARE CRUCIAL; PRICE TAKES SECOND PLACE. For further questions, Mr. Faller is available at the provided number. Year of manufacture is estimated and not known. //*TRADE-IN, PART-EXCHANGE OR LOAN AGAINST YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All details are provided without guarantee.* More offers available on our website. The description and specified data do not constitute a binding representation and are not guaranteed. The purchase contract concluded at the dealership upon purchase of the vehicle is binding. Errors and prior sale reserved! Kfsdpfx Aew Tlr Rjffoa