Used Etesia H 124 D for sale (77,580)

Year of construction: 2007, condition: excellent (used), 1 radial fan with pre-shaft and cooling disc for hot and dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Volume flow: 71060 m³/h Pressure increase: 1673 Pascal at 250°C (0.637 kg/m³) Pjdpokvpfhefx Ad Segn Speed: 1460 rpm Shaft power: 40.5 kW Weight: kg Year of manufacture: 2007 Insulation with rock wool and galvanized sheet metal. Dimensions: Length: 3250 mm Width: 2400 mm Height: 2000 mm Inlet diameter: 750 / 980 mm Shaft height without spring buffer: Outlet dimensions: 980 x 780 mm including compensator for the outlet side. No damage or wear. Only the color on the inside has faded due to the heat.

Condition: good (used), Countersink, countersink, deburring countersink -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° -Manufacturer: Bilz -Sale: only complete set Pgedpfxsb A Rcco Ad Ssn -Weight: 5 kg

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design Pgjdpfjiuznujx Ad Sjn 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total width: 2,470 mm, total height: 1,520 mm, color: black, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Nice 2013 D-TEC FLEXITRAILER 45FT High Cube swap body chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle = lift axle, extendable in 2 positions (middle and rear) + fixed front, suitable for 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg; Gross vehicle weight: 43,000 kg; tyres: 385/65-R22.5 (R: 6/4/4 mm; R: 6/6/5 mm). Dutch registration with valid MOT (APK) until 26.10.2026. 2 units available. = Further information = Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg Gross vehicle weight: 43,000 kg Psdpfxjx T Di Nj Ad Sjgn Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Maintenance, history and condition MOT (Technical inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: OX-40-BN Further information Contact Arne Honingh for more information.

Condition: used, Filler, manufacturer: KHS / H+K, type: Delta VVF 90/16, rated output up to 38,000 bph, operated at 24,000 bph, with 90 filling valves, with double pre-evacuation, vacuum pump, high-pressure injection, motorized height adjustment, with CIP caps, residual liquid control before filler infeed, with 16-head crowner including crown cap feeder, running direction: left to right, year of manufacture: 1982, retrofitted with new S7 control system in 2004. Pgjdpfx Adeyzhqts Sjn

Condition: new, Clutch-brake series УВ 31… for presses type КД2324, КД2124, КД2324К, КД2124К, КД2324Е, КД2124Е, КД2128, КД2328, КД2128К, КД2328К, КД2128Е, КД2328Е, КД2126, КД2326, КД2126К, КД2326К, КД2126Е, КД2326Е, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. The offered brake is new and has 100% confirmed correctness and efficiency of operation. It is also possible to purchase spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs and a set of seals. We offer clutch-brake type: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses of former USSR origin. The weight of the complete clutch - depending on the specific type - ranges from 200-300 kg. Our offer also includes other parts and accessories for metalworking machines of Russian production (former USSR). Pgodpfxjv Saxrs Ad Sjn

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm. Pgjdpfoyh A Nyex Ad Sen

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Pjdpfx Aoigqutjd Sjgn Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: new, functionality: fully functional, Charger Condition: New device Pedpfxoywpmnj Ad Sjgn Technical condition: New Description: High-frequency charger available in the following capacities: 24V 50A, 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. If you have any further questions, please feel free to contact us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our homepage at fleischmann-foerdertechnik. We are happy to assist you with leasing & financing as well as delivery at favorable rates. Trade-in of Linde equipment is also possible—even if you do not purchase a device from us. Recorded operating hours were read at the time of listing. Subject to prior sale, modifications, and errors.

Condition: new, functionality: fully functional, Charger Condition: New device Podpfxeywpmho Ad Sogn Technical condition: New Description: High-frequency charger available in the following capacities: 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. For further inquiries, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website at fleischmann-foerdertechnik. We are happy to provide quotes for leasing & financing as well as delivery at competitive rates. Trade-ins of Linde equipment are also possible—even if you do not purchase a device from us. The operating hours indicated were recorded at the time of listing. Subject to prior sale, changes, and errors.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Machine number: Y201095 Built in: 2017 Size: DL-C4 mm Speed: 10.000 c/h Equipment • 6 station base • 5 rotary feeder Pjdjl Dxq Uopfx Ad Ssgn • 1 inserting station • 1 reject gate • 1 envelope feeder • 1 belt delivery optional equipment: -- not included -- • extra rotary feeders • shuttle feeders • delivery system Condition: good working, machine can be inspected in production

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good = Additional options and accessories = - ADR - Air suspension - Disc brakes - EBS - Lift axle Pgedpfx Ajxu Ddged Son

Condition: good (used), refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor -Power: 5.5 kW -Speed: 1415 rpm Quantity: 1 piece available Pgedpfxeb A Nd Te Ad Sjn -Dimensions: 450/500/H560 mm -Weight: 150 kg

Condition: used, functionality: fully functional, power: 14 kW (19.03 HP), fuel type: diesel, empty load weight: 654 kg, Year of construction: 2023, operating hours: 85 h, machine/vehicle number: H100D202801, Equipment: all wheel drive, Etesia HVHPX all-wheel drive with high dump in very good condition, only 85 hours. Unfortunately, the mower has become too small for the area we now need to maintain. The machine is in excellent, nearly new condition. With a locking wedge, the mower can be converted to a mulcher; this component is included in the scope of delivery. Psdpfx Adjwgwg Ij Ssgn

Condition: used, Year of construction: 2001, functionality: fully functional, 1600 kVA Oil/Hermetic Transformer, Pauwels, year of manufacture 2001, 21kV/0.69, vector group Dyn5, HV plug-in bushings, LV porcelain bushings, Optional: pointer thermometer, full hermetic protection, rollers, connection flags. Pgjdpoxwa S Eofx Ad Son

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  Capacity: 2,500 bph Formats: Prepared for 0.33 L Longneck Filling temperature: 6°C Overhaul & refurbishment details General overhaul in 2016: Pre-evacuation New rotary ball connection New stainless-steel table New electrics New valve control cabinet in stainless-steel design 0.33 L guiding set Sihi vacuum pump Renewed in 2023: Seals on lifting cylinders and filling valves Vacuum and overpressure valves equipped with new seals and springs Pedpfx Adoyb Sdvo Sjgn

Condition: used, Year of construction: 2008, roll diameter 300 mm Wheel width / mm Distance of shafts / Roller block turning device EU-RB 3000MS Gesamtabmessung: 2060x1002x555mm Adjustment of the roller brackets: manual, centric Podpot Ukxqefx Ad Sjgn Locking: secured locking pin Weight: 750kg Max. Max. load capacity: 3000kg Workpiece diameter: 150 x 3000mm Roller diameter: 300mm Torque on the drive roller: 500 Nm Peripheral force on the drive roller: 3300N Feed speed: 100 - 2000 nm/min Supply voltage: 230 V/50 Hz Connected load: 2.3 kVA

Condition: excellent (used), first registration: 10/2023, wheelbase: 7,630 mm, color: white, Year of construction: 2023, Unladen weight: 7,490 kg Payload: 22,510 kg Gross Vehicle Weight: 30,000 kg Loading platform height: 110 cm Technical condition: very good Visual condition: very good A&D 2-AXLE SPECIAL SEMI-TRAILER FOR CRANE TRUCK 2 axles with air suspension TRIDEC steered rear axle SAF axle Chassis fully hot-dip galvanized Aluminium side walls Pedpfx Adsylk Hko Sogn Lowbed height: 110 cm Neck length: 403.5 cm Loading platform length: 636.5 cm Hardwood floor: 28 mm Tyres: 265/55 R 19.5 We have 2 identical, unused semi-trailers in stock

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,920 kg, lifting height: 3,358 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 2,000 mm, Year of construction: 2025, load capacity: 2,500 kg, Equipment: UVV, additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 5025 – Our heavyweight lifts loads up to 2.5 tons. The H&R Wheel Loader 5025 is your reliable all-rounder for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025 Farm Loader Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Pjdpfx Adeu Dyl Te Ssgn Compact design, high maneuverability: Despite its size and weight, the H&R Wheel Loader 5025 is relatively maneuverable. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between different attachments. Expandable functions: Use the additional 3rd and 4th hydraulic control circuits to operate front-end tools such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heater, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025 Wheel Loader • Fully equipped • Extensively optimized in Germany • Lifts heavy loads up to 2.5 tons at 3.35 meters • Includes standard bucket (200 cm) and pallet fork • Powerful and versatile – versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Joystick with electric gearshift for precise control • 3rd and 4th hydraulic control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • Diesel auxiliary heater • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes 1 year warranty Spare parts warranty Price Net: €28,583.00 VAT: €5,430.77 Gross: €34,013.77 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 3358 mm (bottom edge of standard pallet fork) Unloading height: 2692 mm (standard bucket tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5370 x 2080 x 2650 mm Weight: 4920 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,870 kg, lifting power: 700 kg/m, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, digging bucket width: 120 mm, Year of construction: 2025, Equipment: additional headlights, head guard, standard shovel, trailer coupling, The H&R 1607T telehandler is our smallest loader with a cab. It is exceptionally maneuverable and can be used wherever space is limited. With a lifting capacity of 700 kg, the H&R 1607T telehandler lifts loads weighing up to 700 kg to a height of 2.82 m (bottom edge of the standard pallet fork). Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1607 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-mounted tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1607T Skid Steer Loader • Fully equipped • Extensively optimized in Germany • Telescopic boom for extended reach • Ideal for tight work environments • Includes standard 120cm bucket and pallet forks • Comfortable cab with heating, ventilation, and radio (USB/MP3) • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,290.00 VAT: €3,665.10 Gross: €22,955.10 Financing available! Optional 2-year warranty €595 Psdpfxjv Tabie Ad Ssgn TÜV (road approval) €870 Transport within Germany and Austria for an additional charge Please provide us with your address; we will be happy to provide you with a free, non-binding quote. Technical specifications Lifting capacity: 700 kg Lifting height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (bottom edge of standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: Perkins 3-cylinder diesel Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 2964 x 1160 x 2340 mm Weight: 1740 kg Standard tires: 26 x 12.00-12 Accessories and spare parts are not included. Available from us. Please provide your phone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,150 kg, lifting power: 980 kg/m, lifting height: 2,500 mm, tire size: 31X15,5-15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 980 kg, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With its high lifting capacity, the HR 2210 loader can lift even heavy loads of up to 980 kg to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the HR 2210-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for greater stability • Extensively optimized in Germany • Includes manually adjustable pallet forks • Includes standard 150 cm bucket • Comfort cab with heating, ventilation, and radio • Rearview camera with display • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for trailer use • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 € Gross: €27,304.55 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria for an additional charge Technical specifications Podpfxorhh Sqo Ad Segn Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lift height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm (standard bucket tipped) Lift time / lowering time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Pgsdpfxsulac Ts Ad Ssn Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescopic, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments Pgjdpfxergq Ets Ad Ssn • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,740 kg, lifting height: 3,283 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, fuel: diesel, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, pallet forks, standard shovel, H&R Telehandler 2512T – The compact wheel loader for versatile applications with an enclosed cab for greater comfort. Advantages of the H&R Wheel Loader 2512T Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1200 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the additional hydraulic control circuit to operate additional attachments such as mowers, bale grippers, snow plows, and much more. Pgedporhgn Sefx Ad Sjn H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2512T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom for a greater reach • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Comfortable cab with heating, ventilation, and radio (MP3 and USB) for extended working hours • Joystick with electric gearshift for precise control • Additional control circuit for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Rearview camera with display in the interior • Trailer hitch for additional trailer use • 220V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • Ideal for agriculture and construction and industry • CE-compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,845.00 VAT: €4,150.00 Gross: €25,995.00 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei DEF20CFF4 Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting capacity: 1200 kg Lifting height: 3283 mm (bottom edge of standard pallet fork) Unloading height: 2753 mm (standard bucket tipped) Lifting capacity: 1200 kg Wheelbase: 2.17 m Tires: 31×15.5-15 AS Dimensions: 3850 x 1610 x 2460 mm Weight: 2740 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,050 kg, lifting height: 4,200 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, emission class: euro5, mast type: telescopic, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, hydraulics, low noise, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3514T – The powerful telehandler for versatile applications Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to the telescopic boom, the loader can lift loads of up to 1.4 tons to a height of up to 4.4 meters. Powerful engine: The Yunnei DEF20CFF4 50 hp engine ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R Loader 3514T offers a spacious, air-conditioned comfort cab with an adjustable seat, diesel auxiliary heating, and rearview camera. This allows you to carry out even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic boom • Extensively optimized in Germany • Powerful and versatile - versatile • Compact design ensures good maneuverability • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Rearview camera with display • Adjustable steering column and seat • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Pgoderdhx Topfx Ad Sen Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp (36.8 kW) Emissions class: Euro 5 Lifting capacity: 1400 kg Lift height: 4401 mm (bottom edge of standard pallet fork) Unloading height: 3373 mm (bottom edge of standard bucket, tipped out) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5210 x 1690 x 2560 mm Weight: 4050 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!