Used Empty Pallet Magazine for sale (12,645)

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges Fpedpfx Aoz Iqnvekyjn FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, machine/vehicle number: IC1063, Year of construction: 1990, load capacity: 1,200 kg, lifting height: 2,900 mm, fuel type: electric, mast type: simplex, working condition Internationaler Transport möglich/ International delivery available Serial Number: 66 L 007 working condition Fsdpfx Ajyt T Hcekyepn Internationaler Transport möglich/ International delivery available

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed to meet demanding industrial storage requirements. The modular high-bay racking is ideally suited for logistics centers, industrial operations, large warehouses, and freight forwarding companies. With a load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 1,400 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow powder-coated - Frames: approx. 400 x 105 cm, pre-assembled - Frame color: blue powder-coated - Levels: Floor + 2 - Pallet spaces: 45 including ground level - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 06 x frames (approx. 400 x 105 cm), pre-assembled Fodpfoz Rmr Hex Akyepn - 20 x beams (approx. 270 cm) - 40 x locking pins Price: €1,060.00 net €1,261.14 gross An invoice with VAT shown separately will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner hauliers – shipping costs depend on delivery postcode - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer – tailored exactly to your requirements. Whether for new builds, upgrades or expansions – we will support you with expert advice on your racking configuration. SHOWROOM: Visit us in our showroom! Experience our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled for live demonstration. Our experts are available for your questions and individual consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many more products and variations! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone – our telephone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) Fpsdsz Ipr Hjpfx Akyen F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle Fedpfxsz Ir Hao Akyjpn - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Fjdpjz Iprtefx Akyopn Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2000, condition: good (used), Semi-automatic pallet wrapping machine, stretch wrapping machine Design with horseshoe-shaped turntable for easy loading with a pallet truck Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volts / 50 Hz Fpjdpfxepygwqo Akyen Year of manufacture: 2000 Pallet wrapping machine Capacity: 1200 kg Turntable: with fork opening Turntable diameter: 1500 mm Adjustable turntable rotation speed Motorized film pre-stretch adjustable to 100% or 200% Turntable height: 75 mm Wrapping programs Program 1: Double wrapping with lifting and lowering of the film carriage Program 2: Double wrapping with lifting – pause for attaching the top cover of the pallet – and lowering of the film carriage Program 3: Simple wrapping with only lifting of the film carriage Program 4: Simple wrapping with lifting of the film carriage and pause for attaching the top cover Intended use Re-wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 pallet wrapping machine, stretch wrapping machine More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2008, operating hours: 2,059 h, load capacity: 1,800 kg, fuel type: electric, empty load weight: 485 kg, mileage: 2,059 km, Well-functioning Linde T18 electric pallet truck from 2008; Capacity of 1,800 kg; 2,059 hours on the meter; Equipped with battery, external charger, and automatic filling system; Dealer maintained at Linde. Fodpew Suz Ejfx Akyopn

Condition: used, machine/vehicle number: --562--OK--EK--V0267, Year of construction: 2021, operating hours: 1,141 h, load capacity: 1,600 kg, load center: 80 mm, fuel type: electric, mast type: other, construction height: 900 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire size: 0,75, rear tire size: 0,25, overall weight: 400 kg, enginetype: Electric, manufacturer: Linde Serial Number: --562--T16 W41152Y00099 Fodpfxsz Rkxhs Akyspn Battery Details: 24V 2PzS 150Ah, Bj 2018, Aqua 24.9 V

Condition: good (used), Year of construction: 2010, operating hours: 3,552 h, load capacity: 1,800 kg, fuel type: electric, empty load weight: 500 kg, mileage: 3,552 km, Well-functioning electric pallet truck Linde T18 from 2010; Capacity of 1,800 kg; 3,552 operating hours; Equipped with battery, external charger, and automatic filling system; Fitted with a fruit rack; Dealer maintained by Linde. Fodpfx Ajw Ufakskyepn

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm Fjdjz Iqtfjpfx Akyjpn ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Fodpfx Aoz Irr Aekyopn FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: good (used), Year of construction: 2015, turntable diameter: 1,640 mm, Used pallet wrapping machine Brand: DNC Packaging Model: Fenix PLC Year: 2015 Features: - Rotating platform pallet wrapper/stretch wrapper for palletized loads. - Control system: Controlled by a programmable logic controller (PLC), which allows for configuring wrapping cycles (upper/lower wraps, film tension, automatic up/down movement via a height detection photocell). - Standard capacity: Platform diameter: 1,640mm. - Maximum load weight: 2,000 kg. - Maximum packaging height: Mast for loads up to 2,200mm. Fjdpfx Akez Ndgzjyjpn Includes: - Complete perimeter installation with masts, rails, and barriers. - All film rolls and packaging covers shown in the photographs.

Condition: used, Load capacity: 5000 kg Fork length: 1500 mm Fsdpsz I Sbqsfx Akyspn Non-adjustable suspension point!

Condition: excellent (used), Year of construction: 2021, Semi-Automatic and Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE ("The Switch Semi2Auto") Operation: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA Series Production Speed: Up to 35 loads per hour. Load Capacity: Maximum dynamic load weight: 4,500 lbs – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck for turntable protection, 3-sided loading, and pit mounting. Forklift openings at the front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed Fpedpfjwb A N Rjx Akyon ANSI No. 40, direct chain drive with shock absorber and fall protection Automation Features: Fully electric – no pneumatics required. Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It provides significant productivity increases and safety benefits. This technology is only available on Cousins machines. This unique method of attaching and cutting the stretch film offers the following advantages: • Selectable top wrap function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are required to power the turntable, reducing maintenance. • Load placement on the turntable is not critical. • No air connections or noisy compressors • New automatic safety feature for load detection during the first revolution detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions. • A-arm fall protection Control Functions: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the center of the wrap Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or shiny loads Separate control for 1 to 12 revolutions of the upper and lower wrap Selectable parameters for reduced film tension for overwrap.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Fpsdpjz Ipcljfx Akyjn Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: good (used), machine/vehicle number: 17469, Year of construction: 2013, load capacity: 1,400 kg, lifting height: 4,802 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,006 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,539 kg, enginetype: Electric, manufacturer: Linde Serial Number: W4X372D04080 Fpodpfx Asz N Akaokyjn Battery Details: 24V 3PzS 375Ah (aus 2021)

Condition: excellent (used), Logopak 920 II PF Pallet Labeling System Manufacturer: Logopak Pallet Labeling System Model: 920 II PF Your advantages at a glance: Top speed (up to 240 pallets/hour) Reduced roller changes Maximum flexibility Robust design (protective housing) Intuitive operation via touchscreen Print engine quick-change system Thermo-direct or thermo-transfer printing process for labels up to A3 Internal database, error diagnostics and many other features Functions as a stand-alone solution or integrated into the network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product labeling. Fjdpfx Akow U Tc Teyopn The robust mechanical design of the 10 mm thick aluminum cast housing with solid steel hinge plates was specifically developed for continuous operation in harsh industrial environments. The printer can be controlled either externally via a serial interface or, thanks to its integrated intelligence, operated as a stand-alone device. SPECIFICATIONS Printing speed: 150 mm/s Core diameter: 50 mm / 76 mm Label roll diameter: 180 mm Font size: 2 mm – 50 mm Printing direction: Rotatable by 90°, 180° and 270° Barcode types: Codabar, Code39, Code128, CodeMatrix EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A Interface: V.24 or 20 mA, network compatible Memory (RAM): 1 MB battery-buffered CMOS memory, expandable to 8 MB Ambient temperature: 5 °C to 40 °C Dimensions (W x L x H): 700 mm x 500 mm x 400 mm Weight: approx. 50 kg Housing: Painted steel Integrated Intelligence: IP54 control unit with Power Leap II® processing power • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal article database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock • RS 422 and 20 mA, Ethernet connection also available (10/100 Mbps) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using a higher-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 11390, Year of construction: 2007, operating hours: 20,458 h, load capacity: 2,000 kg, lifting height: 1,750 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,480 mm, battery voltage: 24 V, fork length: 1,200 mm, overall weight: 886 kg, enginetype: Electric, manufacturer: Jungheinrich Fpjdpfoyiwluox Akyen Serial Number: 91533054 Battery Details: 24V BJ:2019

Condition: good (used), machine/vehicle number: 17151, Year of construction: 2011, operating hours: 7,675 h, load capacity: 1,200 kg, lifting height: 3,600 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 2,250 mm, fork length: 1,150 mm, overall weight: 1,191 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 90389567 Fedpfx Akszfdtcoyjpn

Condition: like new (used), Year of construction: 2019, operating hours: 884 h, load capacity: 1,600 kg, fuel type: electric, mileage: 884 km, JUST ARRIVED Electric pallet truck Brand: Still (Germany) Year of manufacture: 2019 884 operating hours Fjdpfx Akez Hxvloyopn Capacity: 1,600 kg Battery with charger included.

Condition: excellent (used), machine/vehicle number: 17406, Year of construction: 2011, operating hours: 1,819 h, load capacity: 1,600 kg, lifting height: 5,250 mm, free lift: 1,800 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,460 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 90379192 Fpsdpfxsz N N Ace Akyen Battery Details: 24V 375Ah

Condition: good (used), functionality: fully functional, machine/vehicle number: 91584068, Year of construction: 2014, operating hours: 1,178 h, load capacity: 2,500 kg, lifting height: 200 mm, battery capacity: 344 Ah, battery voltage: 24 V, fork length: 2,350 mm, Equipment: UVV, power assisted steering, Jungheinrich EJE 225 Electric Low-Lift Pallet Truck, fully stainless steel Year of manufacture: 2014 Operating hours: 1,178 h Battery year: 05/2021 Battery capacity: 344 Ah at 24 V Load capacity: 2,500 kg Fork length: 2,350 mm Power steering Current new price over €50,000 The truck can also be operated with the footplate folded up. Charger included The equipment works flawlessly and is ready for immediate use. Affordable delivery by a specialist company available. Fpodpfjyi Hcpox Akyen Have a look at our other listings as well. We always have many more high-lift and low-lift pallet trucks and forklifts in stock. Need spare parts for your forklift, high-lift pallet truck, etc.? Just contact us.

Condition: used, SolidHub Electric High-Lift Pallet Truck This electric high-lift pallet truck has only 76.3 operating hours. It features a maximum lifting height of 4,000 mm, a load capacity of 1,200 kg, and a foldable operator platform with side protection bars. Fedpfx Ajz Hx Izekyjpn This electric high-lift pallet truck is particularly suitable for: • Warehouses and logistics • Order picking • Loading and unloading • Internal transport of pallets • Storage and retrieval in pallet racking systems Technical specifications: • Manufacturer: SolidHub • Model: CDD12-030 • Load capacity: 1200 kg • Lifting height: 4000 mm (4 meters) • Load center: 600 mm • Fork width: 550 mm • Fork length: 1150 mm • Recommended battery capacity: 210 Ah • Weight without battery: 978 kg • Serial number: 080127N1700 • Operating hours: 76.3 h Equipment: • Electric lifting and drive system • Foldable operator platform • Side protection bars • Ergonomic tiller control • Electric lifting and lowering function • Battery charge level indicator • Emergency stop switch New price: €7,860 gross

Condition: good (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: 53,433 mm Number of bays per racking row: 5 Number of levels including the base level: 2 Technical data for the capacity: Pallet spaces per bay: 19 Number of pallet spaces per row: 228 Total number of pallet spaces: 288 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 20x Pallet racking uprights, used Material color: blue Frame profile: MX630 Fpjdpfez Ng E Uex Akyjn Profile dimensions: 100 x 81.3 x 1.8 mm System hole spacing: 50 / 50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 6,000 mm Depth: 1,100 mm 114x Pallet racking beam, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Hook: 5 hooks Clear span: 2,707 mm Max. load per beam pair: 2,400 kg, with evenly distributed load. 228x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams to prevent unintentional lifting 80x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 1x Load plate with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.