Used Emergency Power Unit Container for sale (66,052)

Year of construction: 2008, condition: not inspected (used), Emergency power Geko 6401 ED-AA/ZEDA, year of construction 2008, 2050 operating hours, diesel, 220/400 volt, ser.no.100821, engine runs but does not generate power Dsdpegqfxrefx Ab Tecr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Emergency generator 125 kVA - as good as new/barely used Technical data: 100 kW / 125 kVA 230/400 V Current: 180 A Djdjtdb A Rjpfx Ab Tecr Frequency: 50 Hz Year of manufacture: 12/2022 Produced according to ISO8528

Condition: good (used), Used stainless steel tank Last use: pharmaceutical Item number: 10717 Volume: 300 liters Type: Standing on 3 feet Height of feet: 780mm Material (wetted): 1.4571 / AISI316 Type: Single wall Working pressure according to nameplate: ATM Max.operating temperature: 100°C Tank dimension: Outer diameter: 700mm Total width: 810mm Total length: 885mm Total height: 2100mm Cylindrical height: 800mm Materials: Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Facilities: Nameplate: yes distance drain to floor: 510mm Outlet diameter: 47mm Various nozzles Djdpfx Abeicnure Tocr

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Dcsdpfxex A Imze Ab Tor Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: used, Container 17 cubic metres – 4.5 m x 2 m x 1.92 m – (8 units in stock) = Additional information = Usable material: waste VAT/Margin scheme: VAT deductible Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm. Dcjdpfexn Swzex Ab Ter

Condition: new, New in its original box with all accessories and documents. Box was only opened to take the photo. Comes with controller as per the first photo. Dcodpfetk Dfvex Ab Tsr

Condition: used, machine/vehicle number: CD038A0W9180007, input current: 40 A, Frequency converters Allen-Bradley PowerFlex400, Series A, 22C-D038A103, 18.5 kW, 40 A, S/N CD038A0W9180007. 2 pcs. in stock. Djdpfxovwk H De Ab Tocr Also available are Allen-Bradley PowerFlex700H, Series B, 132 kW, 232 A. S/N 12082007, Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, C4C9186-H04, Mitsubishi F700, FR-AF740-03610-EC, F41R43, 132kW, 232A, ABB 132kW, 241A, ACS880-01-246A-3+E200, ser.nr. 1174301299.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Serial number: 2010-11 /01 Dsdpfewp Rtgex Ab Tscr Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, functionality: fully functional, Year of construction: 2010, Equipment: pallet forks, Offered here are seven hydraulic power units from the manufacturers AC-Motoren GmbH and ADDA Antriebstechnik, built in 2010. The machines are in used condition and are currently not in operation. From a safety perspective, the machines meet the latest standards. All units are operational and ready for use. Jacket compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. +20 / max. +150 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Volume (l): 4 Tube compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. 4 / max. 90 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Volume (l): 5 An inspection of the machines can be arranged upon request and by appointment. Dedoxdi I Nepfx Ab Tscr If you have further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2024, Motor power: 1.5 kW Inlet nozzle: NW 120 mm Rated air flow: 814 m³/h Vacuum at rated flow: 2,180 Pa Filter area: 5.1 m² Manual cleaning including integrated pre-separator Collection container: 135 L Location: Nattheim Dcjdpfx Aboxbhz Aj Tsr

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Djdpfxsx D N N Hs Ab Tscr This Finn-Power SG-6 was manufactured in 2006. It features a Siemens 840D control system, automatic loading, four clamps, and a 20-piece revolver with a well-organized layout. Additionally, it includes an angle shear, five-piece C-conveyor, and a new model STS palletizing unit. The machine is fully operational and available for viewing. Contact us for more information. Application Types Punching

Condition: good (used), Electric cart mover Power Attack MTC 30 CC Device in very good condition. Ideal for transporting heavy goods, machines, boats, etc. After inspection, brand new batteries 2 pcs, new tires, charger, hook, fastening element with transport rollers included. Dcedpfxswunl Do Ab Ter Manufacturer’s description: Thanks to our compact electric towing tractors, you can efficiently transport heavy loads weighing up to 25 tons. These efficient transport devices are characterized primarily by the fact that they are emission-free, quiet, compact and efficient. Therefore, they are particularly suitable for internal use in warehouses and production halls. Product features: Pulling force 30 t Length: 1650 mm / double telescopic Roller width: 380 mm Weight: 70 kg

Condition: used, operating hours: 4,253 h, Applicable material: Concrete Delivery terms: EXW Please contact Nedtrax B.V. for more information Power Curber 5700 Dcsdpox Dympofx Ab Tsr Reading hours: 4253 H CE-Marked In good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: automatic, controller manufacturer: ESA, controller model: ESA S550N, bending force (max.): 135 t, working width: 3,050 mm, stroke length: 400 mm, operating speed: 200 mm/s, number of axes: 8, type of crowning: CNC-controlled, oil tank capacity: 150 l, travel distance X-axis: 625 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, overall weight: 9,500 kg, number of support arms: 2, pressing force: 135 t, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Djdpowqhw Ejfx Ab Tocr

Condition: excellent (used), For sale is a used Record Power bandsaw BS 350 SABRE with a cutting width of 350 mm. The saw is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical data: - Motor: 1.5 HP / 230 V - Power input: 1,500 Watts Dodpfxjxzfzyo Ab Tecr - Cast iron flywheels, 350 mm diameter - Table size: 546 x 400 mm - Table height: 1,029 mm - Table tilt: 45° - T-slot size: 19 mm - Cutting height / width: 285 / 350 mm - 2 speeds: 440 / 1,000 m/min - Blade length: 2,820 mm - Blade width: 6 - 20 mm - Extraction port: 1 x 100 mm with bayonet fitting and 1 x 58 mm internal - 65 mm external diameter - Dimensions (L/W/H): 870 x 656 x 1,892 mm - Weight: 116 kg The bandsaw is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: bandsaw, saws, cutting machine, band Reference: R-D1618

Condition: used, Used Extraction unit comprising : Ø 1 DE DIETRICH stainless steel reactor • Capacity : 310 litre • Electric heating: 6 x 2 kW • Frame agitation Ø 1 stainless steel heat exchanger • Surface area : 2 m² • 29 tubes - Ø 20 x 150 mm Dcodpfxsxyxn Dj Ab Tor Ø 1 stainless steel vessel 600 litre • Ø 900 x 1300 mm Ø 1 liquid ring vacuum pump • Type LOHE 25309 • Motor : 2.2 kw - Hp 3– Rpm 3000 – 3x 220/380 volts Specifications: Capacity: 82 gal Diameter: 35.4" Straight Side: 51.18" Material of construction: stainless steel Type of stainless: DE DIETRICH stainless steel

Year of construction: 1997, condition: ready for operation (used), General Data Machine weight 14500 kg Main Drive Punching force 300kN This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information. Application Types Punching Djdpfxox D Nn Ao Ab Tecr

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Laser with 8kw and chiller Open Cabin with right and left side accessible doors Safety glasses on the doors NIGHT Cut for safer cutting and piercing process SMART Cut for faster processing of thin material MAX Cut for piercing process time reduction for thick material Gas Mixer Cut Nozzle check and OPC by camera Adaptive cut ATC automatic tip changer with 20 nozzle stations This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Dedpex D Ebrsfx Ab Tscr Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, operating hours: 26,437 h, General Data Measurements width 9797 mm Measurements depth 3757 mm Measurements height 2200 mm Dcsdpfxex D Imdj Ab Tsr Machine weight 10000 kg Main Drive Laser power 3 kW Movement X-Axis Movement 3065 mm Y-Axis Movement 1560 mm Z-Axis Movement 150 mm This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 26437 production hours, of which 11414 are laser hours. The machine has a laser power of 3 kW, is in good condition and well maintained. Application Types Cutting

Year of construction: 2017, operating hours: 5,800 h, condition: ready for operation (used), General Data Machine weight 11000 kg Main Drive Laser power 3 kW Number of axis 3 Dedpfx Aex D Nyxsb Tjcr Movement Z-Axis Movement 150 mm Max Material Thickness Steel up to 20 mm Stainless steel up to 8 mm Aluminium up to 6 mm This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. Application Types Cutting

Year of construction: 2013, condition: ready for operation (used), Main Drive Laser power 4 kW Additional Equipment Air dryer with filter Documentation (1 copy on CD) T eleservice module (incl. modem and installation) CAM MAESTRO Windows. Dongel license on the USB PORT / MAESTRO software package includes: - Nesting module .dwg Import / .dxf Multiimport - CycleTimeLight “Quick Piercing” oil spraying device Automatic pallet changer T yp P A Nozzle changer Scrap conveyor Extraction system (2. 400m3) Dodpfox D N Tlox Ab Tscr This Prima Power CP 4000 Zaphiro Laser Cutting machine was manufactured in the year 2013 and has 37978 laser hours. The machine has a laser power of 4 kW. Application Types Cutting

Year of construction: 2003, operating hours: 28,003 h, condition: ready for operation (used), This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Application Types Dedox D H Dbopfx Ab Tecr Punching

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 3 Dodpsx D Exkofx Ab Tjcr This 3-axis Prima Power Platino CP4000 was manufactured in 2008. It features a 4 kW power capacity, 18,300 operating hours, and a double table with automatic loading and exchange. The working table measures 3000 mm x 1500 mm. It can cut steel sheets up to 10 mm, wood, and acrylic. Consider the opportunity to buy this Prima Power Platino CP4000 CO2 laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 4000 mm Dcodpfx Aex D Efkob Ter Measurements depth 9000 mm Measurements height 3200 mm Machine weight 12000–14000 kg Control Unit Brand Prima Main Drive Number of axis 5 Laser power 3 kW This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information. Application Types Cutting

Year of construction: 2018, condition: ready for operation (used), This 8-axis Prima Power eP-0520 press brake was manufactured in 2018. It boasts a maximum tonnage of 550 and a distance between side frames of 2,100 mm. The machine features an O-frame design, enhancing its robustness and reliability. Ideal for precise bending with a stroke of 310 mm and high speeds on the X-axis (350 mm/s) and Z-axis (2,000 mm/s). A great opportunity to buy this Prima Power eP-0520 press brake. Contact us for more information. Dedpfx Aex D Sd Tsb Tjcr Application Types Bending