Used Elektromotor 7 5 Kw 720 U Min B3 for sale (78,429)

Condition: excellent (used), Year of construction: 2017, High-Performance 5-Axis Machining Center POSMILL H800 U Year of manufacture: 2017 Operated in single-shift mode Large spindle cooler Full Heidenhain measuring systems installed on all axes Heidenhain 530 control unit Kessler spindle, 18,000 rpm Kessler rotary swiveling arm, swing diameter 800 mm, fully usable with zero-point clamping system New maintenance scheduled for April 2025, rotary union replaced (€8,600) ————— Technical Data: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm (A-/C-axis) Swivel range approx. -100 to +120° and -120 to +120°, C-axis endlessly rotating 360° Table diameter: 800 mm Djdpfx Aexg Ir Eeduowc Tool holder: HSK 63 Tool positions: 96

Condition: used, _____ Description: Year of manuf. : 2005 Control : Heidenhain iTNC 530 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : SK 50 Spindle: Technology:Gear spindle Speed:8.000 rpm Power:28 kW Torque:727 Nm Taper:SK 50 Dwedpfxjwz A A Do Adujc Swivel head:B-Axis - 0,001° Media feed through:Coolant + Blast air NC rotary table: C-Axis:0,001° Speed tabletop:30 rpm Holding torque:5.000 Nm Clamping surface palett:ø800 x 630 mm Tableloading (max.):1.200 kg In General: Toolmagazin:120 stations Rapid traverse in X/Y/Z-Axis:60 m/min Equipment: Position sensor:Direct scales in all Axes Workpiecemeasurement:Touch probe, Infrared Toolbreakagecontrol:Mechanic Setup:Operation mode 4 Coolingmanagement:Internal cooling unit with paperbeltfilter, 40 bar Chipmanagement :Chip conveyor Extraction :Mechanic, Brand ifs Media supply through spindle :Switching coolant/blow air Paletts :2 pieces : :

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Dwsdpspqxnxefx Aduec

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Dedpfsxc Ttmjx Adujwc Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: good (used), Year of construction: 2003, operating hours: 82,000 h, functionality: fully functional, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, controller manufacturer: Siemens, laser hours: 33,000 h, control type: CNC control, sheet thickness stainless steel (max.): 20 mm, laser type: CO₂ laser, Equipment: cooling unit, dust extraction, safety light barrier, AVAILABLE AT SHORT NOTICE! TRUMPF Trumatic L 3050 – 5 kW MACHINE WAS COMPLETELY OVERHAULED IN 2018! TECHNICAL DATA: Manufacturer: TRUMPF Model: Trumatic L 3050 – 5 kW Year of manufacture: 2003 Working area: 3,000 x 1,500 x 115 mm Dodpfexg Nh Ujx Aduswc Control: Siemens Sinumerik 840 D Laser power: 5,000 watts Max. sheet thickness (steel): 25 mm Max. sheet thickness (stainless): 20 mm Max. sheet thickness (aluminium): 12 mm Operating hours: approx. 82,000 h / 33,000 h STANDARD FEATURES: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TLF 5000, high-frequency excited, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Gantry drive combined with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for producing small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change device for cutting head - Automatic sheet edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Positioning laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - Control SIN 840D: Open PC-based control, easy operation, online help, diagnostic functions, maintenance log, technology data, teleservice - Shopfloor programming ToPs 100 lite - Safety: multi-beam light barriers, fully encapsulated and nitrogen-flushed beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network port - Electrical equipment for 400 V / 50 Hz three-phase power - Paint finish: textured paint white RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Dwsdpfxsxd A S Us Aduec Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW Dwodpfx Adsxc Eiysujc -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : HSK 40 In Generel: Technology:Automated graphite milling centre Components:2x 5-axis HSC milling centres + pallet system with robot Manufacturer:Mikron + EROWA Types:HSM 400 U + HSM 600 U + Robot Multi Twin Year of construction:2007 Control:Heidenhain iTNC 530 Speed:42,000 rpm Tool holder:HSK 40 Machine I: Manufacturer:Mikron Type:HSM 600 U Traverse paths X/Y/Z:800/600/500 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+30° / -110° C-axis:360° C-axis speed:360 rpm Clamping surface:Erowa UCP 320x320 mm Max. table load:120 kg Tool magazine:68 stations Machine II: Manufacturer:Mikron Type:HSM 400 U Traverse paths X/Y/Z:400/240/350 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+ - 110° C-axis:360° C-axis speed:250 rpm Dodpfx Adexgpwcoujwc Clamping surface:ITS 148 Powerchuck Table load max:25 g Tool magazine:36 stations Automation: Manufacturer:EROWA Type:Robot Multi Twin Gripper station:6 station, various gripper Round storage:5 levels Level 1-2:5x UCP 300x300 mm Level 3-4:15x ITS 148 Level 5:30x ITS 50 Equipment: Measuring systems:Direct in all axes Workpiece measurement:Infrared measuring probe Tool measurement:LASER Set-up mode:Electronic handwheel Graphite extraction:2x BURN WK 5806 Automation:Round pallet storage

Condition: as good as new (ex-display), Year of construction: 2022, Almig screw compressor BELT 37 - 10 bar Bj 2022 // Exhibit immediately available Technical specifications: Type: Belt 37 Maximum final pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C, at 10 bar (ue): 5.15 m³ / min Installed engine power: 37 kW Operating voltage: 400V Mains frequency: 50 Hz Dimension (L x W x H): 1270 mm x 890 mm x 1190 mm Weight: 590 kg Djdpfx Ajxd T R Ioduewc Sound pressure level (DIN 45635 T.13): 73 dB (A) Compressed air connection: G 1 1/2 " Visit our shop in Erlangen. We always have a large selection of new and used compressors in stock.

Condition: used, Year of construction: 2005, grinding diameter 500 mm grinding length 1500 mm centre height 250 mm Control GRINDplusIT Maschine wird teilüberholt mit Messprotokoll und Gewährleistung innerhalb Deutschlands und Anrainerstaaten geliefert. 1 UR-RS 175 / 1500 standard version (T1, T2, T5, T7) 1 grinding wheel set T1 400x63x127mm 1 grinding wheel set T2 400x63x127mm 1 grinding wheel set T5 400x63x127mm Dsdpfxswulrhe Aduswc 1 internal grinding device T7 0120 mm for HF spindles 1 centre height 250 mm 2 grinding head motor: drive power 10.0 kW 1 CNC control Heidenhain GRINDplusIT 1 Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 KEL-POLY, out-of-round grinding 1 KEL-NET for CNC control GRINDplusIT 1 B-AXIS GRINDplusIT: ‘CNC-controlled B-axis’ (standard) 1 GRINDplusIT: v constant 35m/s or 45m/s_adjustment of grinding spindle via control 1 T1, T2, T5, T7: T1 and T2: v=constant, T5: v=variable (Danfoss), T7: HF spindle 1 operating unit for 1x MFM or MFV spindles, VACON 22kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 re. HJND 21 1 x HF internal grinding spindle MFV 1260/4 re 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 tailstock with manual retraction 1 MICRO-ADJUSTMENT: tailstock lower section with micro-adjustment 1 spring-loaded quill insert 1 pneumatic relief for the tailstock 1 upper table flooding (standard) 1 reinforced workpiece spindle MK 5 DIN 55026 size 5’ 1 C-AXIS: CNC-controlled C-axis to workpiece spindle box reinforced 1 lower part FIXED for the workpiece spindle box reinforced 1 KELPOS: Active longitudinal positioning MOVOMATIC, mounted on the grinding head 1 diameter measuring head Movomatic; DU200 1 measuring control unit Movomatic ES124 / digital 1 KELSET: KELSET tool measurement system, MARPOSS 1 Basic module for KEL-TOUCH cut-off sensor and KEL-BALANCE balancing device 1 KEL-TOUCH, cut-off sensor for diagonal/tandem 1 Full emulsion enclosure 1 Coolant cleaning gun connected to the table 1 Emulsion grinding mist extraction system 1 lubricant for initial filling HF dressing device type IBAG on OT Data from state of delivery without guarantee

Condition: good (used), functionality: fully functional, Bread roll stamping machine Eberhardt STA 5 x 7 for Kaiserstüpfler, star rolls and button rolls with 3 stamping boxes mobile machine connection 400V, 16A-CEE plug used machine Other bakery machines in stock! Dsdpoq T N A Ujfx Adujwc

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS Travel X / Y / Z: 1,250 / 880 / 800 mm Control: Heidenhain Spindle speed: 10,000 rpm B-axis: automatic Number of tool changer stations: 60 Tool holder: SK-50 Number of pallets: 2 pcs Pallet dimensions: 1,000 x 800 mm MACHINE DETAILS Operating time: 59,112 h Spindle hours: 21,619 h Machine transport dimensions: 5.5 x 3.0 x 3.1 m; 14.3 t EQUIPMENT - electronic handwheel - MillPlus 3D contouring control - Central spindle air blast - Measuring probe Dodpjxdnclofx Aduewc - Rinse gun - Documentation - Chip conveyor (hinged belt) - Coolant system - Oil mist extraction

Condition: good (used), screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor, trough screw conveyor, trough screw conveyor -Conveyor screw: Conveyor length: approx. 2500 mm -Design: stable -Drive motor: EM Marelli 1.5 kW -Gearbox: Rossi -Speed: 24 - 200 rpm -Conveyor screw: Ø approx. 240 mm -Conveyor screw pitch: 230 mm -Inlet/Outlet: 255 x 225 mm -Dimensions: see technical drawing in the photos -Transport dimensions: 3380/600/H670 mm Dedpfxswna Rlo Adujwc -Weight: 310 kg

Condition: used, mileage: 1,049,117 km, power: 235 kW (319.51 HP), first registration: 08/2010, fuel type: diesel, number of seats: 45, gearing type: automatic, next inspection (TÜV): 09/2024, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, parking heater, * Clean vehicle * Well-maintained interior * From ongoing operation / ready for immediate use * Currently registered, with no repair backlog * Kilometers may increase slightly * Corona hygiene protection wall registered * 45 seats * 37 standing places * Euro 5 engine / EEV * Engine code: 1999/96/EG,C,EEV,GKL:G1 * New MOT in July 2022 Dedpfxsxdgrle Aduewc * All information without guarantee * Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: MA0120, screw compressor ALMIG BELT 30 with 10 bar Aircontrol Basic control Year of construction: 2021 Operating hours: 0 h Technical specifications Type: BELT 30 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Appendix C: 4.12 m³ / min Degree of protection / insulation class drive motor: IP 55 / F Nominal power drive motor: 30 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 76 dB (A) Length: 1270 mm Width: 890 mm Height: 1190 mm Weight: 560 kg Compressed air connection: G 1 1/2" Delivery time on request. Visit our store. Dwedpjxd T Nwefx Aduec We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2023, operating hours: 1 h, fuel type: diesel, motor manufacturer: Baudouin 6M33G715/5, General information Field of application: Construction Serial number: 20230509003 Weights Empty weight: 7.300 kg Functional Generator capacity: 720 kVA CE mark: yes Other information Fuel consumption: 100 Liter / Hour at 75% Load Generator: Leroy Somer TALA473F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1100 l Transport dimensions (LxWxH): 4,99x2,15x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information This genset is equipped with DSE 8610 MKII and motorized breaker applicable for net synchronization. Dwsdjxctamepfx Adujc Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm Dwedpfoi Dfidsx Adusc 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Dsdpsc Sqvljfx Aduewc Type AH 315 MA-4 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A IP55 Complete with cooler make Wistro 380-500V 50/60Hz 255/370W

Condition: good (used), Three-phase motor with 2 speeds, electric motor -Power: 4/6 kW -Speed: 720/1440 rpm -Shaft: Ø 38 x 80 mm Dwsdpfed S Spdex Aduoc -Construction: B5 -Protection class: IP 55 -Dimensions: 510/300/H350 mm -Weight: 77.5 kg

Condition: used, mileage: 297,412 km, power: 100 kW (135.96 HP), overall weight: 7,500 kg, fuel type: diesel, color: green, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 6,300 kg, wheelbase: 2,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, loading space width: 1,850 mm, loading space length: 1,450 mm, loading space height: 400 mm, first registration: 05/2000, number of seats: 3, Equipment: ABS, all wheel drive, cabin, crane, differential lock, power assisted steering, trailer coupling, * German vehicle * One owner * 6-cylinder engine * Condition, see photos * Palfinger crane foldable behind the cab * Type: PK 7000B * Lifting capacity at 1.8 m = 2,900 kg – 3.5 m = 1,700 kg – 5.2 m = 1,090 kg – 7.0 m = 800 kg – 8.7 m = 630 kg * 5th and 6th control circuit * 3 hydraulic extensions * Hook height 10 meters * 4 hydraulic outriggers * Remote control * Removable flatbed body * Body dimensions: L=1,450 x W=1,850 x H=400 mm * Trailer coupling * Towing capacity: 24,000 kg * Hydraulic connections for trailer * 3 seats * Differential lock * Sunroof * DIN lashing eyes * Comfort driver's air-sprung seat Djdpfx Adewx R Iceuewc * Engine brake * Rotating beacons * Front tow coupling * 8-speed manual gearbox * Wheelbase: 2,600 mm * GVW: 7,500 kg * Unladen weight: 6,300 kg * Payload: 1,200 kg * For sales to traders and for export (non-EU and EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods, to avoid any misunderstandings regarding the condition and suitability. Viewing and inspection are possible at any time by prior appointment and are expressly desired. All information provided without guarantee. No liability will be accepted for errors or incorrect information in the offer. The buyer is obliged to independently confirm the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available. Dwedpfx Ajxc H R Esdusc

Condition: used, Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 107.37.00.616, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, rotary table diameter: 450 mm, rotational speed (min.): 140 rpm, overall weight: 7,700 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 3,000 h, coolant supply: 70 bar, spindle motor power: 3,700 W, spindle nose: HSK63, number of spindles: 1, number of slots in tool magazine: 120, tool length: 270 mm, tool diameter: 80 mm, tool weight: 6 g, type of input current: three-phase, Equipment: chip conveyor, Excellent condition machine fully maintained by GF all the time we have owned it. -Machine came out of Renault F1 when 3 years old and we bought it from GF UK after a full service and checks with 12-month warranty. We have maintained it with GF ever since Brand New Spindle fitted less than a year ago. 2800 hours only We also had a new Rotary table fitted at a cost of £50k three years ago HEIDENHAIN iTNC 530 with Ethernet X-Axis (600 mm) Y-Axis (450 mm) Z-Axis (450 mm) Max Workpiece Size: (450mm) Dia x (450mm) height x (150kg) B-Axis (Tilt) -120 / +45 degrees C-Axis (Rotary) x 360 degrees FEED DRIVE Drive: Ball screws in X, Y, Z-axis Drive: Direct Drive Torque Motors in B and C-axis Rapid Traverse X/Y/Z (22 m/min) Table Rapid Speed B-Axis (Tilt)50 rpm Table Rapid Speed C-Axis (Rotary)140 rpm Maximum Acceleration X/Y/Z up to 5 m/sec2 DIRECT DRIVE TORQUE MOTOR RTT (ROTARY TILT TABLE) DYNAFIX System 3R Dynafix with 7 x pallet stations Dedpfx Adsw S Nf Eeuowc (350 x 350 mm) maximum pallet size possible Maximum workpiece weight (150 kg) With hydraulic clamping in turning and swivelling axis All feed motors are liquid-cooled 120 POSITION TOOL TOWER Number of magazine places - 120 positions Spindle taper - HSK-A63 Maximum tool diameter (80 mm) Maximum tool diameter with unoccupied adjacent positions. (125 mm) Maximum tool length (270 mm) Maximum permitted tool weight (6 kg) Number of pockets for tool length up to (270 mm)70 Number of pockets for tool length up to (160 mm)50 WEIGHT Including pallet changer - Approximately (7,700 kg) Machine base - Polymer concrete (man-made granite) STEP-TEC SWISS MADE SPINDLE Spindle taper-HSK-A63 Spindle RPM- 100-20,000 rpm Spindle power - 40 HP (38 kW) Spindle torque 40% ED - 67 Ft/Lb (91 Nm) Maximum tool diameter - (80 mm) Maximum tool length from the spindle nose (350 mm) Maximum tool weight- (6 kg) EQUIPPED WITH: (600 l) band filter coolant tank with micro paper filtration system -18-80 bar (261-1,160 PSI) adjustable high-pressure Coolant Thru Spindle (CTS) -Flow rate 5.3 gallon/min (20 l/min). Unit is a KNOLL KF400|FKA/600 Litre Lift up scraper chip conveyor for aluminium machining M&H Infrared touch probe BLUM laser tool measuring system Tool blow-off unit Blow-off unit for laser measuring system Tilting the working plane: This option activates the optional HEIDENHAIN software cycle 19 “APS” Option (Advance Process System) “ITC” Option (Intelligent Thermal Control) “ITC-5X” Option (Intelligent Thermal Control for 5 axis) External spindle chiller

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Dwedpfx Adoi Duh Iouec Weight 2000 kg good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 39,500 h, laser power: 5,000 W, TRUMPF TruLaser 5030 – 5 kW Classic TECHNICAL DATA: Manufacturer: TRUMPF Model: TruLaser 5030 – 5 kW Classic Year of manufacture: 2009 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 5,000 Watt Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm Operating hours: 39,500 h STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TruFlow 5000, high-frequency excited, maintenance-free turboradial blower, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap Djdpsw Rytqjfx Aduowc - Drives: Gantry drive combined with linear direct drives - Quick-change cutting head system - PlasmaLine - Fast processing with SprintLas for all sheet thicknesses - ContourLine for production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Automatic sheet edge detection - ControlLine capacitive height control and process regulation - Positioning laser diode - Automatic focus position adjustment (FocusLine) - Automatic nozzle cleaning - PierceLine - NitroLine high-pressure cutting - Laser power control - Automatic shutdown - Work area lighting - SIN 840D control: PC-based open control, user-friendly operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Shop floor programming - Safety: Multi-beam light barriers, fully enclosed beam guidance with nitrogen purging, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - Network connection: RJ-45 network port via teleservice installation - 3.5" floppy disk drive - TFT color monitor - Electrical equipment for 400 V / 50 Hz three-phase current - Finish: Textured white RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens OTHER: - The machine underwent a technical overhaul in 2021

Condition: good (used), electric motor, drive motor, engine Dwodpfx Aew S Tg Tjduec -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece