Used Electronics Industry for sale (31,161)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5350x4650x1820 mm Weight 7500 kg Total power requirement 47 kw Csdpfx Abjvz Hdyj Tsrk

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, electronic module printed circuit board for operating unit. TCD22 Crsdpfxjk Aua No Ab Tsk -Type: WW TCD 22 . 104.73.20.041 -Dimensions cardboard: 410/310/H65 mm -Weight: 0.6 kg

Condition: used, power converter / rectifier. Crsdpfed Ihaxsx Ab Tek techn. details see photos.

Condition: new, Industry diesel power generator J44 With AVR voltage regulator Generator IP23 | E-Start Engine type: John Deere | Fuel: Diesel Electr. power 3Ph: 44 kVA - 400 V Weight: 978 kg | Tank capacity: 100 liters Dimensions: LxWxH = 2,100 x 938 x 1,285 mm Equipment: - Connection via terminal strip Cedpfskyr I Sex Ab Tsrk - Control APM303 - Collecting tray for liquids - Soundproof body version Silent M137 - Support for short circuit current 2.7x In approx. 5 sec. - Pre-equipment/wiring for automatic/remote start - Measurement and display fuel level - Measurement and display of currents and power (integrated transformers) - AUTOMATIC accessories (battery charger + motor resistor) - Heat contact protection (CE requirement ISO 8528-13) - Sound insulation in accordance with 2000/14/CE standard - Soundproofing hood cpl. assembled (= version IV) - CE requirement Note the new color for the housing is CHARCOAL-BEIGE (RAL1014) SDMO dealer: Other models are available on request.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Csdpfx Abjfz U Hvo Tjrk In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, functionality: fully functional, A control electronics unit in its original packaging is for sale. Crjdewd Ebuspfx Ab Tjk Please contact us if you are interested.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4850x4650x1820 mm Credpevz E R Ssfx Ab Tsk Weight 6500 kg Total power requirement 47 kw

Year of construction: 2012, condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 -Type: A20B-2002-052 MES-1A Crsdpfskahkyox Ab Tek -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Condition: used, power converter / rectifier. techn. details see photos. Cjdpfod Ihayox Ab Tsrk

Condition: new, Industry diesel power generator J88 With AVR voltage regulator Generator IP23 | E-Start Engine type: John Deere | Fuel: Diesel Electr. power 3Ph: 88 kVA - 400 V Weight: 1.530 kg | Tank capacity: 190 liters Dimensions: LxWxH = 2,572 x 1,126 x 1,571 mm Equipment: - Connection via terminal strip - Control APM303 - Collecting tray for liquids - Soundproof body version Silent M138 - Support for short circuit current 2.7x In approx. 5 sec. - Pre-equipment/wiring for automatic/remote start - Measurement and display fuel level - Measurement and display of currents and power (integrated transformers) - AUTOMATIC LIGHT accessories (battery charger + engine resistance predisposition) Crsdpjkyr R Usfx Ab Tsk - Heat contact protection (CE requirement ISO 8528-13) - Soundproofing in accordance with 2000/14/CE standard - Sound insulation hood cpl. assembled (= version IV) - CE requirement Note the new color for the housing is CHARCOAL-BEIGE (RAL1014) SDMO dealer: Other models are available on request.

Condition: good (used), Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Crsdpfx Aebggb Ueb Tjk Type: Sogevac SV 300 Cat. No.: 10931 Status: Refurbished Warranty: 12 months Included: Oil filling (mineral oil), operating manual with list of initial files Voltage: 50/60Hz 230-400/460V Motor rating: 5,5 KW Final pressure without gas bellow: approx. 0,08 mbar Delivery time: ex stock

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5350x4380x1820 mm Crsdpovz E R Eofx Ab Tjk Weight 6800 kg Total power requirement 41 kw

Year of construction: 2012, condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, electronic module extension module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm Codpfx Aekahi Hjb Tsrk -Weight: 3 kg

Year of construction: 2002, condition: used,

Condition: new, SDMO Industry Diesel Generator J22 With AVR voltage regulator Generator IP23 | E-Start Engine type: John Deere | Fuel: Diesel Electr. power 3Ph: 22 kVA - 400 V Weight: 922 kg | Tank capacity: 100 liters Dimensions: LxWxH = 2,100 x 938 x 1,285 mm Equipment: - Connection via terminal strip - Control APM303 - Collecting tray for liquids - Soundproof body version Silent M137 - Support for short circuit current 3x In approx. 10 sec. - Pre-equipment/wiring for automatic/remote start - Measurement and display fuel level - Measurement and display currents and powers (integrated transformers) - AUTOMATIC accessories (battery charger + motor resistor) - Heat contact protection (CE requirement ISO 8528-13) Cjdpfxjkyr Hxs Ab Tork - Soundproofing in accordance with 2000/14/CE standard - Soundproofing hood cpl. assembled (= version IV) - CE requirement Note the new color for the housing is CHARCOAL-BEIGE (RAL1014) SDMO dealer: Other models are available on request.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4850x4380x1820 mm Weight 5800 kg Total power requirement 41 kw Crsdpsvz E Htofx Ab Tjk

Condition: used, Surveillance camera, video surveillance -Line camera lens optical industry 3 550 450 -Come: from a warehouse liquidation Cjdpfxeb N E Hdj Ab Terk -is sold unchecked with no guarantee -Dimensions box: 80/185/H120 mm -Weight: 1.2 kg

Condition: used,

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input electronic module ET 200B -Type: 6ES7 131-OBLOO-OXBO Cedpfx Absh Di Exo Tjrk -Dimensions: 235/90/H50 mm -Weight: 0.3 kg

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Crjdpfsigyp Hjx Ab Tsk Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: as good as new (ex-display), functionality: fully functional, grinding height: 200 mm, power: 11.03 kW (15.00 HP), grinding belt speed: 18,000 mm/s, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, input frequency: 50 Hz, input voltage: 400 V, Additional technical data Feed speed: 2.8 - 20 m/min The new Format4 findustry wide belt sanders impress in industrial applications primarily through their individually configurable assembly of units. Tailored specifically to the application and field of use, the machine can be equipped with two, three, or four units. A high degree of customization guarantees that all requirements in terms of surface finish and processing efficiency are met. Maximum operating comfort in industrial applications The clearly structured touchscreen control panel is intuitive to operate. All machine functions are clearly displayed graphically on the digital display. The pass-through thickness can be set directly from the control panel to a tenth of a millimeter at the touch of a button. Automatic thickness measurement simplifies the adjustment of the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and its thickness is then transmitted directly to the machine "wirelessly." The fixed infeed table height of 900 mm allows for easy and fatigue-free operation, while a vacuum table, roller table extensions on both infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure maximum comfort and optimal processing conditions for workpieces of any size. Optional equipment 10E LACQUER – Cross sanding unit ESC in place of 1st contact roller 20A 2nd contact roller unit 22 2nd sanding roller in 85° Shore 30E LACQUER – Superfinish unit ESC in place of 3rd contact roller 39 Switch contact for slide control (price/piece) *6 51 Soft start for 15kW (20HP motor) 59B Control unit with 15" color touchscreen display 63 Scotch-Brite brushing device at the machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor belt 72 Ionizing bar at the machine outfeed 73 Vacuum table with 4kW (5.5 HP) blower 74 Inverter for vacuum blower for vacuum adjustment 83 Sanding height 200mm instead of 170mm 84 Optimized control software for special processing 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15kW power output Additional information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation in post code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89 Crsdpfx Aoxtpydjb Tjk

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc. Csdpfx Ajwkqmisb Tjrk

Condition: new, The DP-700Industrie is the industrial version of our multi-blade circular saw in an extra robust design. It is specially developed for the industrial longitudinal division of materials. It was designed to efficiently process large quantities of material. The independent positioning of two saw blades and the ability to install multiple fixed discs make this machine ideal for processing hardwood at different heights. This means it is designed for long-term use in the production of lumber, pallets or other wood cut goods. The machine is equipped with an upper and lower extraction device to ensure maximum extraction performance, which solves a common problem with multi-blade circular saws. 9 pieces of 140mm thick feed rollers - 6 pieces at the feed, 3 pieces behind the saw blades - pull in every workpiece quickly and easily. The scope of delivery includes 10 saw blade holders, which can be moved anywhere on the shaft. Technical data: Motor power: 30 kW Feed motor power: 1.1 kW Shaft diameter: 70mm Saw blade diameter: 450 mm Maximum cutting height: 150 mm Minimum material length: 800 mm Saw blade speed: 3500 rpm Feed speed: 6 - 35 m/min (infinitely adjustable) Material width: max 650 mm Width of feed rollers: 600 mm Measurement: with scale Saw blade holders included: 10 pieces Weight: approx. 3,000 kg Optional: More powerful motor (up to 50 kW) Interchangeable saw bushings Longer rolling table (4 meters long) Crsdpfsvrvgxox Ab Tjk Additional saw blade holders

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1/93, Year of construction: 2012, load capacity: 1,500 kg, fuel type: electric, Submission of a bid obligates timely collection by 31.12.2025! TECHNICAL DETAILS Capacity: 1,500 kg EQUIPMENT Charger Crjdpfxoxyh T Ao Ab Tsk Fork protection (for road use) Mandrel for roll transport (core diameter 70 mm) Fork extension

Year of construction: 2006, condition: repair required (used), functionality: not functional, machine/vehicle number: 059061003, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection by 31/12/2025! The offer includes: MBO T800.1/642/R (year of manufacture: 2006; serial number: 059061003) MBO Z-2 knife folding unit (year of manufacture: 2008; serial number: 82 06 10 09) MACHINE DETAILS Cjdoxyfagspfx Ab Terk Electrical specifications Mains voltage: 400/50 V3~ / Hz Control voltage: 24/25 V – / A Current consumption: 2.5 A Fuse rating: 16 A Note: Only units 2 & 3 as well as the knife folding unit are available. There is a defective electronic component at the delivery section. The feeder is missing.