Used Edgebanding for sale (810)

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: in stock at warehouse 54634 Bitburg - immediately available - Fsdpfx Aezbyvaok Uopl

Condition: excellent (used), Year of construction: 2024, Hebrock adhesive basin / exchange basin For Hebrock K36 Year of manufacture: 2024 Fodpfx Akeznnlho Ujpl Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1996, Brandt edge banding machine in good, used condition. KTV51 - Year of manufacture 1996 The machine was purchased used and only used occasionally. The machine is being sold as part of the closure of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Fpodpfxjzpflno Ak Usl An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Overall length: 3700 mm Width: 1440 mm Fpodpfx Asy Dd Iyok Uol Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim

Condition: excellent (used), EXCELLENT CONDITION Hebrock edge banding machine Model: Top 2000 Machine description Features - Heating strip for chipboard - Glue container - Pressure roller - Front and rear saws Fjdpfx Aezadx Ajk Uepl - Top and bottom milling station, radius and straight milling - Machine length: 3100 mm - Weight: 600 kg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, HOLZ-HER Edgebanding Machine ARTEA 1030 - TRADE SHOW MACHINE Edge thickness, coil material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. Fedpfx Aszg Axtjk Uspl All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling - Edge feeder - LR101 gluing system - glue application roller (Teflon-coated) - Pressing unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Pneumatic surface scraper - Buffing unit - Spray device in the infeed and outfeed areas 12 months warranty Delivery, installation, and machine instruction can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: new, Year of construction: 2026, HOLZ-HER Edgebanding Machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Fodpfx Akjzhaw Ae Ujpl Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - LED machine lighting - Edge trimming - Edge feeder - LR101 glue application system - glue application roller (Teflon-coated) - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Face scraper - Buffing unit 12 months warranty Delivery time upon request. Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: new, Year of construction: 2026, functionality: fully functional, HOLZ-HER edge banding machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed rate: 9 m/min. Glue application in PUR & EVA qualities, easily achieved thanks to the HOLZ-HER GluJet adhesive application system. All common edge types, including solid wood edges up to 5 mm. Fpodpezgu Dnefx Ak Uol Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling cutters - Edge feeder - GluJet GJ201 adhesive application system - Material buffer - Glue collecting container - Automatic reloading function - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraper unit - Pneumatic surface scraper - Buffing unit - Spray system in the infeed and outfeed area 12 months warranty Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Fpsdoyfgrpspfx Ak Ujl Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate Fjdpfszvhk Hox Ak Uopl K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, We are offering this ready-to-use HOMAG KR 79/02/PU/S2 edge banding machine, manufactured in 1993. Manufacturer: HOMAG Type/Model: KR 79/02/PU/S2 Year of manufacture: 1993 Fpedpfx Akszwunbo Uol If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW Fpsdpfx Akjzuyqvj Usl - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Fjdpfozuyp Sex Ak Uopl Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: used, Year of construction: 2005, Edge banding machine Manufacturer: IMA Type: Advantage 600 Year of manufacture: 2005 Technical data - Joint milling - Gluing unit for thin and thick edges - Imprint zone - 2x edge trimmers - Flush trimming - Multi-function trimming unit (MFA) Fedpfx Akjzuyiro Ujpl - Profile trimming blade - Surface trimming blade - Buffing - Return system at the upper pressure roller Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, - Edge trimming mills - Gluing unit for EVA hot melt adhesive - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Edge banding machine Manufacturer: Homag Type: KAL 330/6/A3/S2 Year of manufacture: 2009 Technical data - Edge trimming mills - Gluing unit for EVA hot melt adhesive Fpjdpfxszuyhzo Ak Uel - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW Fjdpfx Akszux T Ae Ujpl - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Edge banding machine Manufacturer: Biesse Type: Jade 340 Year of manufacture: 2018 Technical data - Workpiece thickness: 10 - 60 mm - Edge height: 14 - 64 mm Fpedpezux Tvefx Ak Usl - Edge thickness: 0.4 - 8 mm - Feed rate: 12 m/min Biesse HD touchscreen control unit Units - Pre-milling unit - Glue application unit - Additional interchangeable glue pot - Trimming unit - Corner rounding unit - Flush trimming blade and profile trimming blade - Polishing unit - Release agent spray unit Operating hours as of May 14, 2026: 4832 hours.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone Fpsdszux R Iopfx Ak Uel - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. Fpedpfox S Hmzjx Ak Ujl 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: ready for operation (used), Year of construction: 2009, Board thickness 60 mm Edge thickness 3 mm Feed advance 25 m/min Sound-proof cabin Yes Glue tank Yes ----- Weight 3300 kg Hours worked Hours under power State good At local norms ----- Status in production Description We are putting our IDM edgebander up for sale as a replacement following the expansion of our production workshops. Fpsdpeuftubjfx Ak Usl Here are the technical specifications: Model P-RT4 (productivity) Machine dimensions: 8656 x 900mm 1600mm wide roller table Crawler feed speed: 12-25 m/min Minimum panel size (length x width): 220 x 60mm Panel thickness: 10 to 60 mm Edge thickness from 0.3 to 3 mm Top, bottom, front, rear shape copying, end trimming on independent motors Profiled and flat scraping unit Integrated router shaft for optional panel grooving Edge and panel cleaning system with brushes Safety devices on all covers + environment (machine complies with standards) Electronic and mechanical adjustment of all aggregates Automatic part detection and aggregate positioning Granular gluing system with glue tray Integrated edge-roller tray Panel and edge preheating lamps Electronic positioning of pressure rollers Weight: 3300 kg

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Plate heating Pre-heating unit Edge banding application with roller, Replaceable tank Features a glue drain Pneumatic pre-trimming cutter, Liquids Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine features NC control Max. component height 60mm Max. edge banding thickness in roll 3mm, Fjdjzwd Ikspfx Ak Uspl Feed rate 11m/min Original mileage less than 30,000 meters, in my opinion, the technical condition is very good Inspection and testing possible on site.

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp Fodpfx Aezv Tibek Ujpl - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Fpedpfx Akszv Rcrj Uel Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Fpjdpfou Hldmsx Ak Uel Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Fedpfxezc Ilxs Ak Uepl